anslut 024373 LED Bulb Instruction Manual
- June 13, 2024
- anslut
Table of Contents
024373
SMART
LED
Operating instructions (Translation of the original instructions)
Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com
© Jula AB, BOX 363, SE-532 24 SKARA 2023-05-17
(1)
(2)
(3)
(4)
(5)
SYMBOLS
| Read the instructions.
---|---
| The product is dimmable.
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
Rated voltage|
230 V~50 Hz
---|---
Power|
7 W
Frequency|
2.4 GHz
Socket|
E27
Colour rendering index|
CRI 80
Colour temperature|
2700 – 6500 K + RGB
Colour tone|
Adjustable
Equivalent x W incandescent bulb|
60 W
Luminous flux|
806 lm 360°
Life span|
15,000 h
DESCRIPTION
This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant. Does not require a separate hub/ router. You can control all SMART products in the app and use functions such as timer control, scheduling and automatised events.
- App controlled
- Switching On/Off of remote control switch from mobile phone
- Simple installation
- Supports Amazon Alexa and Google Assistant
- Supports Smart Remote control
- Supports control with only BLE gateway in the event of loss of WiFi.
- Supports biorhythm
- Supports Scenario Mode for indication of user alignment function
SYSTEM REQUIREMENTS
WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher). Compatible with Google Assistant, Amazon Alexa etc.
USE
INSTALL APP
Scan the QR code to download the Smart Life app. Or search at App Store or
Google Play.
FIG. 1
Start the app to register or log-in to your account.
Registration
Register with mobile phone number or email address. *Country settings follow the mobile telephone system, but it is possible to change country number/settings manually before registering is completed (cannot be changed after registering).
Login
If you already have an account, click on ”Log in with an existing account” under ”Create a new account”, enter the mobile phone number or email address used to register and enter the password to log in, after which the operative system iOS can use Apple ID to log in.
CONNECT PRODUCT
-
The device distribution network only supports 2.4 GHz WiFi and Bluetooth. Activate the mobile phone’s Bluetooth function and connect the 2.4 GHz WiFi network before the device is added.
-
Click on the button “Add device” in the middle of the screen with list of devices, or click the + button on the top right. If the phone’s Bluetooth function is activated the device information is shown automatically. “Add” can be selected when adding a device to go directly to the WiFi password to complete the network connection.
FIG. 2 -
If the device information is not shown, select ”Add Manually” or ”Auto Scan” to add the device.
Add Manually (under Wi-Fi Mode)
1. Blinking or breathing (the light flashes quickly): press on/off/on/off/on
quickly in succession (within 2 seconds). After 3–5 seconds the light flashes
rapidly (0.5 s interval) and the network connection process starts.
Blinking or breathing (the light flashes slowly): If the home network is a
mixed 2.4 GHz/5 GHz network, the following connection method should be used:
press on/off/on/off/on quickly in succession (within 2 seconds), when the
light is flashing rapidly (at 0.5-second intervals), press
off/on/off/on/off/on quickly in succession (within 2 seconds). After 3–5
seconds the light flashes slowly (2 s interval), which means that the product
has found the WiFi setting in the phone and pairing with WiFi hotspot and
Smart Life can start. Click on the link, wait for the pairing to complete,
return to the app, and start the network connection process.
FIG. 3
Auto Scan
-
When the light flashes rapidly (0.5 s interval) or slowly (2 s interval), select “Auto Scan” to activate automatic searching for devices and start the network connection process.
FIG. 4 -
When the light flashes (rapidly or slowly) enter the WiFi password to complete the connection. (Only supports 2.4 GHz network.)
Tips: Normally the device connects to the network within 3 minutes.
If the network connection is not made within 3 minutes the light stays on continuously. Repeat the connection attempt in accordance with steps 3 and 4. -
The status light goes on after connecting to the network and the functions scene, mode and timing etc. can be selected in the app.
FIG. 5
Additional services are available in the app menu “Me”, for example connection to Alexa and using voice controlled services in Google Assistant. Click on the required service and connect to the device for third party service according to the instructions.
Pairing of device
When the connection of the device is completed accounts can be added to share the device so that it can be controlled by other users.
In the app menu ”Me” there is information, feedback and comments concerning commonly occurring problems.
NOTE:
Never attempt to use the light with incorrect voltage.
EU DECLARATION OF CONFORMITY
Jula Item number
024373
Model no.: G95-uYn PW 220-240V C KKKKK
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.
LIGHT SOURCE
SMART, WIFI
Conforms to the following directives, regulations and standards:
Directive/Regulation
| Harmonised standard
---|---
RED 2014/53/EU|
EN 300 328 V2.2.2, EN 301 489-1 V2.2.3, EN 50665:2017, EN 61547:2009, EN 61000-3- 3:2013+A1, EN 62493:2015, EN 301 489-17 V3.2.4, EN 50663:2017, EN IEC55015:2019+A11, EN IEC 61000-3-2:2019+A1, EN 62560:2012+A11, IEC TR 62778:2014
Eco design Directive 2009/125/EC
|
Lightsource Regulation (EU) 2019/2020 + (EU)2021/341
|
RoHS 2011/65/EU + 2015/863
|
EN 50581:2012
This product was CE marked in year:
Signed for and on behalf of
Skara 2022-08-30
FREDRIK BOHMAN
BUSINESS AREA MANAGER
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>