anslut 024368 App Controlled Candle Bulb Instruction Manual
- June 13, 2024
- anslut
Table of Contents
anslut 024368 App Controlled Candle Bulb
Product Information
- Product Name: SMART SV LED
- Model Number: C37-2 WIFI+BLE DIM+CCT+RGB 4.9W E14 X-Y
- Manufacturer: Jula AB
- Address: Box 363, SE-532 24 SKARA, SWEDEN
- Features: Dimmable, Wi-Fi enabled, compatible with Google Assistant, Amazon Alexa, etc.
Product Usage Instructions
- Read the user instructions carefully before use.
- To install the app, scan the QR code provided or search for “Smart Life” in the App Store or Google Play.
- Launch the app and register or log in to your account.
- Follow the in-app instructions to set up and control the SMART SV LED.
- To manually add the device under Wi-Fi mode, follow these steps:
- If the light is blinking or pulsing rapidly, quickly press the power button on/off/on/off/on (within 2 seconds).
- Refer to the app or user manual for further configuration and customization options.
- Dispose of the product according to applicable regulations for recycling.
SYMBOLS
TECHNICAL DATA
- Rated voltage 230 V~50 Hz
- Power 4.9 W
- Diffusion angle 240°
- Frequency 2.4 GHz
- Socket E14
- Colour rendering index CRI 80
- Colour temperature 2700 – 6500 K + RGB
- Colour tone Adjustable
- Equivalent x W incandescent bulb 40 W
- Luminous flux 470 lm 360°
- Life span 15,000 h
DESCRIPTION
This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant. Does not require a separate hub/router. You can control all SMART products in the app and use functions such as timer control, scheduling and automatised events.
- App controlled
- Switching On/Off of remote control switch from mobile phone
- Simple installation
- Supports Amazon Alexa and Google Assistant
- Supports Smart Remote control
- Supports control with only BLE gateway in the event of loss of WiFi.
- Supports biorhythm
- Supports Scenario Mode for indication of user alignment function
SYSTEM REQUIREMENTS
WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher).
Compatible with Google Assistant, Amazon Alexa etc.
USE
INSTALL APP
Scan the QR code to download the Smart Life app. Or search at App Store or
Google Play.
Start the app to register, or log into your account.
-
Registration
Register with mobile phone number or email address. *Country settings follow the mobile telephone system, but it is possible to change country number/settings manually before registering is completed (cannot be changed after registering). -
Login
If you already have an account, click on ”Log in with an existing account” under ”Create a new account”, enter the mobile phone number or email address used to register and enter the password to log in, after which the operative system iOS can use Apple ID to log in.
CONNECT PRODUCT
- The device distribution network only supports 2.4 GHz WiFi and Bluetooth. Activate the mobile phone’s Bluetooth function and connect the 2.4 GHz WiFi network before the device is added.
- Click on the button “Add device” in the middle of the screen with list of devices, or click the + button on the top right. If the phone’s Bluetooth function is activated the device information is shown automatically. “Add” can be selected when adding a device to go directly to the WiFi password to complete the network connection.
- If the device information is not shown, select ”Add Manually” or ”Auto Scan” to add the device.
Add Manually (under Wi-Fi Mode)
- Blinking or breathing (the light flashes quickly): press on/off/on/off/on quickly in succession (within 2 seconds). After 3–5 seconds the light flashes rapidly (0.5 s interval) and the network connection process starts. Blinking or breathing (the light flashes slowly): If the home network is a mixed 2.4 GHz/5 GHz network, the following connection method should be used: press on/off/on/off/on quickly in succession (within 2 seconds), when the light is flashing rapidly (at 0.5-second intervals), press off/on/off/on/off/on quickly in succession (within 2 seconds). After 3–5 seconds the light flashes slowly (2 s intervals), which means that the product has found the WiFi setting in the phone and pairing with the WiFi hotspot and Smart Life can start. Click on the link, wait for the pairing to complete, return to the app, and start the network connection process.
Auto Scan
-
When the light flashes rapidly (0.5 s interval) or slowly (2 s interval), select “Auto Scan” to activate automatic searching for devices and start the network connection process.
-
When the light flashes (rapidly or slowly) enter the WiFi password to complete the connection. (Only supports 2.4 GHz network.)
Tips: Normally the device connects to the network within 3 minutes.
If the network connection is not made within 3 minutes the light stays on continuously. Repeat the connection attempt in accordance with steps 3 and 4. -
The status light goes on after connecting to the network and the functions scene, mode and timing etc. can be selected in the app.
Additional services are available in the app menu “Me”, for example connection to Alexa and using voice-controlled services in Google Assistant. Click on the required service and connect to the device for third-party service according to the instructions.
Pairing of device
When the connection of the device is completed accounts can be added to share
the device so that it can be controlled by other users. In the app menu ”Me”
there is information, feedback and comments concerning commonly occurring
problems.
NOTE: Never attempt to use the light with incorrect voltage.
EU DECLARATION OF CONFORMITY
Important! Read the user instructions carefully before use. Save them for
future reference. Jula reserves the right to make changes. For latest version
of operating instructions, see www.jula.com
© Jula AB, BOX 363, SE-532 24 SKARA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>