SLV 1007515 Outdoor Bulkhead V 360 LED Outdoor Wall Light LED Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007515 Outdoor Bulkhead V 360 LED Outdoor Wall Light LED
Product Information
- Product Name: Wall- and Ceiling Light
- Model Number: 1007515
- IP Rating: IP65
- Luminous Flux: 1900 lm (6500K)
Product Usage Instructions
- Installation:
- The installation of this product requires expert knowledge and should only be carried out by an approved electrician, following local and national regulations.
- Light Source Replacement:
- The light source can only be replaced by a professional.
- Control Unit Replacement:
- The separate control unit can only be replaced by a professional.
- Safety Guidelines:
- Read the manual carefully and keep it for further use.
- Disregarding the safety advices may lead to danger of life, burning, or fire.
- Any works on the electrical connection should only be done by an electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate the product only with intact protection glass or protection cover.
- If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician.
- Take measures to ensure that children are not harmed by the product.
- Do not stare into the active light source.
- Product Specifications:
- Dimensions: A – 20 mm, B – 9 mm
- Minimum Distance (A B): 15 mm
- Light Intensity: 100%, 75%, 50%, 25%
- Light Temperature: 3000K (WW), 4000K (CW), 6500K (DL)
- Operating Range: NL – 3m, 6m, 4m, 2m; EN – 2m, 4m, 6m; DA – 6m, 4m, 2m; RU – 2m, 4m, 6m; TR – 10m, 8m, 6m, 4m, 2m
- Radio Equipment Compliance: The product complies with Directive 2014/53/EU and can be distributed in all countries of the EU.
- Manufacturer’s Website: https://www.slv.com/jump/1007515
INSTRUCTION MANUAL
Wall- and Ceiling Light
FEATURES
TOOLS REQUIRED
The installation requires expert knowledge and may be carried out only by an
approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control
unit is only exchangeable by a professional
Hereby, SLV GmbH declares that the radio equipment described here is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address. This radio
equipment may be distributed in all countries of the EU.
Technical Details are subject to change.
Operating Manual PART B
Wall- and Ceiling Light 1007515
Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass or protection cover.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Do not stare into the active light source.
- Additional safety advices =
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Do not strain mechanically or expose to strong dirt contamination.
- IP65: Protection against dust (dust-tight) – Protection against jetted water from all directions.
- Admissible ambient temperature(ta): -20°C …+45°C.
Light Source
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
- This product contains a light source of the energy efficiency class D.
- Reference control setting: 3000K
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Do not clean with pressure washer.
- Openings providing aeration or drainage must be kept free.
- The following influences may have unwanted effects on the product: acidic surrounding, high salt content in the air, cleaning agents, fertilizer, thawing salt, chemicals.
- Store dry and clean
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall and ceiling surface mounting.
- Follow local regulations for outdoor installations.
- Do not seal the product yourself (e.g. with silicone).
- Install according to declared IP type.
- Install as shown in the figure
Electrical connection
- Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
- Equip flexible wire ends with suitable wire ferrules!
- Direct the fixed installation cable through strain relief.
- Live conductor à Terminal L
- Neutral conductor à Terminal N
- Protective conductor à Earth terminal
- Secure strain relief
Operation
- Initialising: After switching on the brightness is on 100%. After 10 seconds the light is switched off. During the initialization period the sensor does not detect movement.
- Quick switching on and off (3 times in 2 seconds) deactivates the sensor function and the light stays on. Next on and off switching activates the sensor again.
Sensor adjustments
Adjustment of the detection range
Adjustment of the period of illumination (5 seconds to 30 minutes
Light Control
When detecting movement the sensor switches the light on regardless of the
ambient light when light control is not active.
Check secure fixation and proper function
© 0001 24.05.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>