LUCIDE 45581 Lance Desk Lamp Installation Guide
- June 3, 2024
- LUCIDE
Table of Contents
45581 Lance Desk Lamp
Installation Guide
45581 Lance Desk Lamp
INSTALLATION MANUAL
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting. Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!| CURIOUS ABOUT OUR BRAND?|
#ILLUMINATESYOURWORLD
---|---|---
| |
https://qrcodes.pro/ctf05b| https://qrcodes.pro/PEN8Q4|
https://qrcodes.pro/mJ5x94
Visit our website and discover our entire collection| Our brand video gives
you a glimpse behind the scenes at Lucide| Take a look at how others around
the world use Lucide products
Follow us for the latest lighting trends! ****
Item number: 4 5581/ 0 1/ 30
EAN code: 5411212451118 RECOMMENDED LUCIDE
LIGHT SOURCE
4 90 4 2/ 0 5/ 62
Dimmable: Yes
Included: No
General
- Dimensions LxW xH: 20 ,5cm x 18cm x 41cm
- Main material: Steel
- Ceiling rose material: Steel
- Color: Black and Matt Gold / Brass
- Style: Vint age
- Shape: Corner-Shaped
- Weight: 2,48kg
Specifications
- Dimmable: Yes
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjust able
- Directional: Rot at able (Horizont al)
- Cable: Yes, Cable W it h Plug On Product
- Cable length: 180 cm
- Sensor: W it hout Sensor
- Control: Touch Dim m er – On The Product
- Power supply: Adapt er/ Pow er Grid
- IP-Class: 20
- Electric Class: 2
- Number of light sources: 1
- Lamp socket: E27
- Maximum wattage: 40 W
- Power requirements: 220 -240 V~50 Hz
- Warranty: 2 Years
**** For more specifications of this product please visit www.lucide.com
TECHNICAL DRAW ING & DIMENSIONS
Item number: 4 5581/ 0 1/ 30
EAN code: 5411212451118
INSTALLATION DRAW ING SPECIFICATIONS
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places. Do not put the item in contact
with water or any liquids or inflammable products. Always respect the minimal
distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician.
This is to avoid all risks. Because the temperature of the item and the bulbs
can get very high, they must cool down before being touched. Always use the
correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom (except if a
higher IP degree permits that the item can be used in the bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with this symbol indicating separate collection of such equipment must be
returned to a municipal waste collection point.
| Class I: The item has an earth connection. The earth wire (green-
yellow) needs to be connected to the earth connection (marked with this
symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage supply and must
not be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, discoloring as a result from normal use.
- Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over defective fixture/part and
the original purchase ticket.
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100
DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>