RunCam Helmet Camera Recorder User Guide
- June 13, 2024
- RunCam
Table of Contents
RunCam Helmet Camera Recorder User Guide
Quick Guide
Installation Method 1
Installation Method 2
Camera Rotation
Camera Operations
| Function | Operation |
|---|---|
| Power On/Off |
- Push up the switch button to power on, red light stays on, camera vibrates.
- Push down the switch button to power off, camera vibrates, all lights turn off.
Start/StopRecording|
- Push up the switch button, camera starts recording automatically after power on, red light flashes slowly, camera vibrates.
- Push down the DIP switch button, camera vibrates, stops recording and powers off.
Turn on/Turnoff WiFi|
- In power-on state, short press the WiFi button to enable WiFi, camera vibrates, red light stays on, blue light flashes slowly.
- In WiFi state, short press the WiFi button to disable WiFi, camera vibrates, red light stays on.
Low BatteryReminder|
- When the battery is low, the camera vibrates every 5 seconds, 3 times in total, and automatically powers off after 5 minutes.
Micro SD Card
It is recommended to use a U3 card, supports up to microSD 128GB card.
Note:
Please handle the microSD card with care when inserting or removing it. Avoid
contact with liquids, dust, and debris. For caution, please turn off the
camera before inserting or removing the microSD card. Please refer to the
instructions provided by the microSD card manufacturer and use it within the
acceptable temperature range.
Connecting to a Computer
Connect to a computer via Micro USB, it will be recognized as a USB drive.
Note:
If the camera is not recognized after connecting to the computer, please make
sure there is a microSD card in the camera. If the information on the microSD
card cannot be read properly, please try changing the USB cable or the USB
port on the computer.
Firmware Upgrade
To ensure the best performance of the camera, please use the latest
firmware version. Refer to:
https://www.runcam.com/download/HelmetCam
Firmware upgrade status (blue light flashes slowly, then rapidly, camera powers off after the upgrade is complete).
Technical Support
Please visit: https://support.runcam.com/hc/en-us
Camera Specifications
| Model | RunCam Helmet Camera |
|---|---|
| Image Sensor | 1/2.9” Sensor |
| Video Resolution | 1920*1080@60fps |
| Lens | FOV D:155° H:135° V:77° |
| ISO | Auto |
| Shutter | Auto |
| Video Format | MP4 |
| USB | Type-C |
| Current | 400mA@5V |
| Net Weight | 110g |
| Dimensions | 1672850mm |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>