National Fire Products NFP140112 Brass Roof Manifold Instructions
- June 13, 2024
- National Fire Products
Table of Contents
National Fire Products NFP140112 Brass Roof Manifold
Product Information:
The Roof Manifold is a component used in fire protection systems. It is designed to connect fire hoses to the water supply for firefighting operations. The product features a hose valve for controlling the flow of water.
Product Specifications:
- Part Number: NFP140112
- Configuration: Straight
- Threads: 6 MNPT x 2-1/2 FNST (2)
For more information, visit ferguson.com/nfp.
Product Usage Instructions
Prior to installation, ensure that the identification sign has been installed on the nipple. This sign helps identify the Roof Manifold during maintenance or emergency situations.
To install the Roof Manifold:
-
Coat the male threads of the nipple with pipe thread sealant.
This helps create a secure and leak-proof connection. -
Tighten the nipple one turn past hand tight. Ensure it is securely fastened, but avoid over-tightening to prevent cracks and possible valve failure.
-
Make sure the Fire Department Connection (FDC) is aligned according to the requirements of your fire protection system. This ensures proper water supply connection.
CAUTION: Do not over tighten the Roof Manifold,as this can lead to cracks and potential valve failure.
DIMENSION
Features & Benefits
- Size: 6″ x 2-1/2″ x 2-1/2″
- Straight pattern
- Can be used as an inlet or outlet
- Body: Brass
- Finish: Rough brass
- Can be used with NFP120101 angle hose valve
Installation
Ensure identification sign has been installed on the nipple prior to
installation. Coat male threads of nipple with pipe thread sealant.
Tighten one turn past hand tight. Make sure FDC is aligned according to
requirements.
CAUTION: Do not over tighten. Over-tightening can cause cracks and possible valve failure.
Not for use in potable systems
©2023 Ferguson Enterprises, LLC 0323 5050158
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>