CRYSTORAMA 290-DB Grayson 1 Light Pendant Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 290-DB Grayson 1 Light Pendant
Product Information
- Product Name: CRYST RAMA
- Model Number: 290-DB
- Manufacturer: Crystorama
- Website: www.crystorama.com
- Recommended Bulb Type: 1-Medium Base Bulb
- Recommended Wattage: 40 Watts
- Maximum Wattage: 60 Watts
- Usage Rating: Dry Rated
- Product Dimensions:
- Top Shade: Width 5-3/4″, Height 6″
- Bottom Shade: Width 5-3/4″, Height 6″
- Rod 1: Diameter 5/8″, Length 6″
- Rod 2: Diameter 5/8″, Length 12″
- Canopy Kit: Width 5-7/8″, Height 7/8″
- This product contains lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.P65Warnings.ca.gov
Product Usage Instructions
- Separate the mounting plate from the canopy kit by removing the screws.
- Install the mounting plate to the outlet box using two outlet box screws.
- Determine the preferred hanging height and adjust the required rods.
- Feed the wires through the rods and connect them together.
- Slip the canopy kit along the wire and thread it into the top of the rod assembly.
- Install the canopy onto the mounting plate and secure it with the mounting screws.
- Install the recommended bulb (not included) into the socket.
WARNING:
Electrical Danger Turn Power off All electrical components must be installed
by a licensed electrician in accordance with the National Electric Code and
the appropriate local electrical codes.
You will need 1-Medium Base Bulb 40 Watts Recommended 60 Watts Max. USE LED
BULBS FOR EXTENDED USE This fixture is Dry rated
How to install
- Separate the mounting plate from the canopy kit by removing the screws.
- Install the mounting plate to the outlet box using two outlet box screws.
- Determine the preferred hanging height and adjust the required rods.
- Feed the wires through the rods and connect them together.
- Slip canopy kit along wire and thread it into the top of the rod assembly.
- Install canopy onto the mounting plate, and secure with the mounting screws.
- Install the bulb(not included) into the socket.
DIMENSION
WARNING : This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Numbers
- A. (1)-Mounting hardware
- B. (1)-Mounting plate
- C. (2)-mounting screw
- D. (1)-Canopy kit W5-7/8’’xH7/8’’ #XRF290DBCAN5.875IN
- E. (1)-Rod D5/8’’xL6’’ #XRF290DBROD6IN
- F. (3)-Rod D5/8’’xL12’’ #XRF290DBROD12IN
- G. (1)-Top shade W5-3/4’’xH6’’ #XRF290DBSHA6IN H. (4)-Cylinder nut
- I. (1)-Bottom shade W5-3/4’’xH6’’ #XRF290DBBOTSHA6IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>