Xiaomi True Wireless Earphone 2S User Manual

: June 6, 2024
: Xiaomi

Table of Contents

Product Overview
Instructions
Function Overview
Speciﬁcations
WEEE Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PANTONE COOL GRAY 11C
Mi True Wireless Earphones 2S User Manual ·01

Read this manual carefully before use, and retain it for future reference.

Product Overview

Xiaomi True Wireless Earphone 2S - Product Overview

Illustrations of product, accessories and user interface in the user manual are for reference purposes only. Actual products and functions may vary due to product enhancements.

Instructions

Charging

Charging the earphones
When the earphones are placed in the charging case, they will automatically start charging.
Charging the charging case
Use a Type-C charger to charge the charging case, or place the charging box light upon a compatible wireless charger. The red indicator light ﬂashes during charging, and the white indicator light turns oﬀ aﬅer charging for 10 seconds.
Note : Prior to ﬁrst use, the earphones are deactivated. To activate them, place them into the charging case, and press the function button for 5 seconds. We recommend fully charging the earphones before using them for the ﬁrst time.
Checking Battery Level
Checking the battery level of the earphones
Aﬅer connecting the earphones to a phone, you can check the earphones’ battery level on the phone’s status bar.
Note : The phone’s status bar always displays the battery level of the earphone with the lowest battery level. This feature is not supported by some phones.
Checking the battery level of the charging case
Open the charging case’s lid, or press the function button if the lid is closed:
① When the indicator light of the charging case stays lit for 5 seconds, it means the battery is suﬃcient.
② When the charging case’s indicator light is blinking, it means the battery level is low and should be charged immediately.
Checking the battery level by a Mi phone
Aﬅer successfully connecting to a phone, place the earphones into the charging case and close its lid. Make sure the Bluetooth function is enabled on your Mi phone. Hold your phone close to the charging case, then open the case’s lid. A notiﬁcation will appear on the phone, then you can check the battery level of the earphones and the charging case.
Note : When checking the battery level on your phone, please update your Mi phone to the latest stable version. This feature is currently only supported by some Mi phones.
Turning On
When opening the charging case, the earphones will automatically turn on.
Sleep Mode
Place the earphones back into the charging case and close the lid, the earphones will disconnect and go into sleep mode automatically.
Wearing
Take the earphones out of the charging case, and insert them into your ears according to the leﬅ (L) and right (R) marks.
Note : Aﬅer using the earphones, place them back into the charging case. This will extend their lifespan and help you avoid losing or misplacing them.
Connecting
Connecting the earphones to a new device
① Place the earphones into the charging case, then press and hold the function button for 2 seconds. The charging case indicator light will start blinking, indicating that the earphones are waiting
to be connected.
② Enable the device’s Bluetooth, then locate and connect to “Mi TW
Earphones 2S”. If a passcode is requested, enter “0000”.
Connecting the earphones with a Mi phone
Place the earphones into the charging case and close its lid. Make sure the Bluetooth function is enabled on your Mi phone. Hold your phone close to the charging case, then open the case’s lid. Follow the on-screen instructions of the phone to connect to the earphones.
Note: The feature of fast connection is currently only supported by some Mi phones, please update your Mi phone to the latest stable version.
Connection interrupted
When a device’s Bluetooth is disabled, or if the earphones are out of range, the earphones will automatically enter awaiting connection mode. If the earphones remain disconnected to a device for 5 minutes, they will enter sleep mode. Wearing the earphones again will wake them up and enter awaiting connection mode.
Automatic connection
While the earphones are in the charging case, opening the case will cause the earphones to automatically connect to the most recently used Bluetooth device. If no connection history is detected, or if the earphones cannot successfully connect to any Bluetooth device, the earphones will automatically enter the awaiting connection mode.
Note : If the earphones cannot automatically connect to a device, you will need to manually connect the earphones to the desired device via the device’s Bluetooth settings. Due to the connection characteristics of the Bluetooth signal, in dense
environments with 2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.

Clearing connection history
① Place the earphones into the charging case.
② Press and hold the function button on the charging case for more than 10 seconds. Once the indicator alternately blinks red and white, release the button.
③ The connection history has been cleared and the indicator of the charging case blinks white. Then the earphones are awaiting a pairing.

Function Overview

Xiaomi True Wireless Earphone 2S - Function Overview

Incoming calls
Gently tap either one of the earphones twice: Answer/End calls
Music and voice assistant
While wearing both earphones: Gently tap the right (R) earphone twice: Play/Pause music
Gently tap the leﬅ (L) earphone twice: Access the voice assistant
Taking out an earphone: Pause music
While wearing one earphone:
Gently tap the earphone twice:
Play/Pause music
Notes:
① The voice assistant function can be used only if your device supports it, and this function needs to be granted permission on the device.
② When only using the leﬅ earphone, place the right earphone into the charging case and close the lid.

Speciﬁcations

Model: TWSEJ07WM
Charging Port: Type-C
Net Weight: 52 g
Impedance: 32 Ω
Input: 5 V 1 A
Charging Time: Approx. 1 h
Wireless Connectivity: Bluetooth 5.0
Bluetooth Proﬁles: BLE/HFP/HSP/A2DP/AVRCP
Supported Audio Codecs: SBC/AAC/LHDC
Wireless Range: 10 m (open space without obstacles)
Earphones’ Battery Life (standalone): Approx. 5 h
Total Battery Life (with charging case): Approx. 24 h
Bluetooth Operation Frequency: 2402–2480 MHz (for EU)
Maximum Transmit Power for BT: 10 dBm (for EU)
Maximum Transmit Power for BLE: 10 dBm (for EU)

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

Hereby, Tiinlab declares that the radio equipment type
TWSEJ07WM is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html

Safety Caution

Do not expose batteries or battery packs to excessive heat such as sunshine, ﬁre, or the like.
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching ﬁre, explosion, leakage of corrosive electrolyte, etc).
Disposal of a battery into ﬁre or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of
ﬂammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of ﬂammable liquid or gas.
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
The product operation maximum ambient temperature is 40°C.

To prevent possible hearing damage, do not listen to high volume levels for long periods.
The symbol indicates DC voltage

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Tiinlab Acoustic Technology Limited (a Mi Ecosystem company)
Address: Tianliao Building 1403, Tianliao Industrial Area A, Taoyuan
Street, Nanshan District, Shenzhen 518055, China
For further information, please go to www.mi.com

WARRANTY NOTICE ·01

WARRANTY NOTICE
As a Xiaomi consumer, you beneﬁt under certain conditions from additional warranties. Xiaomi oﬀers speciﬁc consumer warrant
beneﬁts which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty beneﬁts, please refer to Xiaomi’s oﬃcial website https://www.mi.com/en/service/warranty/. Except as prohibited by laws or otherwise promised by Xiaomi, the aﬅer-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse, or damage caused by the user’s negligence or fault are not warranted. The contact person for the aﬅer-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors, or the ﬁnal vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify. The present warranties do not apply in Hong Kong and Taiwan.
Products that were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s oﬃcial seller are not covered by the present warranties. As per applicable law, you may beneﬁt from warranties from the non-oﬃcial retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.