RetroSound New York M2B Digital Media Receiver Instruction Manual
- June 13, 2024
- RetroSound
Table of Contents
RetroSound New York M2B Digital Media Receiver
Product Information
The product is called “New York Face” and it includes the following items:
- Shafts (x2)
- Knobs (A and B)
- Radio Face Quick Start Guide
- Installation hardware (metal spacers, plastic spacer, thin metal washer, shaft nut, small screws)
- Control shafts (Top Control Shaft and Bottom Control Shaft)
- Backstrap
- Ribbon cable
The product is designed to provide modern sound for classic vehicles.
Contact information:
- Email : [email protected]
- Website : help.retromanufacturing.com
Product Usage Instructions
Installation
- Place a metal spacer on each shaft.
- Slide the shafts into the Radio Face.
- Place the white plastic A spacer and thin metal washer onto the shaft, then secure with the shaft nut. Do not over tighten.
- Install the rear knob first, then the front knob.
- Mount the backstrap securely.
- Refer to the Kit Installation Instructions for further use.
Control Layout
The product features the following control layout:
- Top-Front Knob: Power on/off and volume control
- Top-Rear Knob : Source mode selection
- Bottom-Front Knob : Station tuning, mute on/off, equalizer adjustment, setting the clock
- Bottom-Rear Knob: Radio band selection
- Seek Bar Preset Buttons: Radio preset selection
Basic Operation
- Power On/Off : Press the Top-Front Knob to power the unit on. Press and hold the Top-Front Knob to power the unit off.
- Volume : Rotate the Top-Front Knob to change the volume.
- Changing Source Modes: Rotate the Top-Rear Knob clockwise to cycle through the source modes.
- Changing Radio Bands: Rotate the Bottom-Rear Knob counter-clockwise to cycle through the radio bands.
- Tune: Rotate the Bottom-Front Knob to scroll through the stations.
- Seek Bar : Press the Seek Bar to find the previous/next station or skip to the previous/next track.
- Mute On/Off: Press the Bottom-Front Knob to mute and unmute.
- Equalizer (EQ): Press the Top-Front Knob to enter the Tone Control sub-menu. Adjust the EQ settings using the Top-Front Knob.
- Setting the Clock : Press and hold the Bottom-Front Knob to enter the System Settings sub-menu. Adjust the hours and minutes using the Bottom-Front Knob.
- Display Color: Press and hold the Bottom-Front Knob to enter the System Settings sub-menu. Cycle through different colors using the Bottom-Front Knob.
For more comprehensive instructions, refer to the user manual included in your motor box or visit the manufacturer’s website.
What’s in the Box
Installation
- Place a metal spacer on each shaft. Slide the shafts into the Radio Face.
- Place the white plastic spacer and thin metal washer onto the shaft, then secure it with the shaft nut. DO NOT OVERTIGHTEN.
- Install the rear knob first, then the front knob.
- Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the Radio Face to the Radio Motor with the four small screws. With the Radio facing towards you, plug the top Control Shaft into the left side of the Radio Motor. Plug the bottom Control Shaft into the right side of the Radio Motor.
Control Layout
Radio Presets
-
Setting Radio Presets
- To set a preset, tune to the station you want to set the preset to, and then press and hold the desired Preset Button(5) for two seconds.
-
Recalling Radio Presets
- To recall a preset, simply press the Preset Button(5) your station was set to previously.
Basic Operation
Power On/Off
- Press the Top-Front Knob(1) to power the unit on.
- Press and hold the Top-Front Knob(1) to power the unit off.
Volume
- Rotate the Top-Front Knob(1) to change the volume.
Changing Source Modes
- Rotate the Top-Rear Knob(2) clockwise to cycle through the source modes.
Changing Radio Bands
- Rotate the Bottom-Rear Knob(4) counter-clockwise to cycle through the radio bands.
Tune
- Rotate the Bottom-Front Knob(3) to scroll through the stations.
Seek Bar
- Press the Seek Bar(6) to find the previous/next station, or skip to the previous/next track.
Mute On/Off
- Press the Bottom-Front Knob(3) to mute and unmute.
Equalizer (EQ)
- Press the Top-Front Knob(1) to enter the Tone Control sub-menu.
- Press and release the Top Front Knob(1) until you see the EQ setting you’d like to adjust. Rotate the Top-Front Knob(1) to adjust the setting.
- Press the Top-Front Knob(1) to move to the next item, and repeat to adjust each option. Let the unit time out to set.
Setting the Clock
- Press and hold the Bottom-Front Knob(3) to enter the System Settings sub-menu.
- Rotate the Bottom-Front Knob(3) to cycle through the choices until you see CLK, then press the Bottom-Front Knob(3) to select.
- Rotate the Bottom-Front Knob(3) to adjust the hours. Then press the Bottom-Front Knob(3) again to move on to minutes.
- Rotate the Bottom-Front Knob(3) to adjust the minutes. Let the unit time out to set.
Display Color
- Press and hold the Bottom-Front Knob(3) to enter the System Settings sub-menu.
- Rotate the Bottom-Front Knob(3) to cycle through the choices until you see SCAN, then press the Bottom-Front Knob(3) to cycle through the colors. Let the unit time out to set.
Beep On/Off
- Press and hold the Bottom-Front Knob(3) to enter the System Settings sub-menu.
- Rotate the Bottom-Front Knob(3) to cycle through the choices until you see BEEP ON/OFF, then press the Bottom-Front Knob(3) to choose between BEEP ON or BEEP OFF. Let the unit time out to set.
Some features are not available on all radios.
Modern Sound For Your Classic
Refer to the user manual included in your motor box or on our website for more comprehensive instructions.
References
Read User Manual Online (PDF format)
Loading......