RetroSound MC-8207 Fixed Mast Replacement Antenna Installation Guide
- June 2, 2024
- RetroSound
Table of Contents
RetroSound MC-8207 Fixed Mast Replacement Antenna
Product Information
Specifications:
- Antenna Nut
- Rubber Gasket
- Antenna Mast
- Rocker
- Slanted Bezel
- Antenna Cable
- Antenna Base
- Antenna Adapter
- Nut
- Spacers
Product Usage Instructions
-
Step 1: Connect Antenna Cable to Antenna Base
Connect the Antenna Cable to the Antenna Base by threading the cable onto the bottom of the Antenna Base. -
Step 2: Add the Spacer on the Antenna Base
Place one of the two Spacers on the Antenna Base by lining up the notches on the Spacer with the Antenna Base. -
Step 3: Add the Rocker
Place the Rocker onto the Spacer with the rounded side down. This allows the Antenna Base to match the angle of the Slanted Bezel. -
Step 4: Add the Rubber Gasket and Slanted Bezel
With the antenna assembly placed through the fender, add the Rubber Gasket and then the Slanted Bezel. -
Step 5: Add the Antenna Nut
Add the Antenna Nut onto the top of the antenna assembly. Do not overtighten. -
Step 6: Assemble the Antenna Mast
Assemble the Antenna Mast by threading the Antenna Adapter into the bottom of the Antenna Mast. Then thread the Nut onto the end of the Antenna Adapter. Do not overtighten. -
Step 7: Complete the Installation
Complete the installation by threading the Antenna Mast assembly into the Antenna Base.
7470 Commercial Way, Henderson, NV 89011
FAQ
-
Q: Can I use this antenna on any vehicle?
A: The antenna is designed for classic cars but may also be compatible with other vehicles depending on the mounting options available. -
Q: Is the antenna assembly weatherproof?
A: While the components are durable, it is recommended to avoid prolonged exposure to harsh weather conditions to maintain longevity.
Installation Guide
Parts List (parts will vary depending on product purchased)
Step #1 Connect Antenna Cable to Antenna Base
Connect the Antenna Cable to the Antenna Base by threading the cable onto the
bottom of the Antenna Base.
MODERN SOUND FOR YOUR CLASSIC
Step #2 Add the Spacer on the Antenna Base
Step #3 Add the Rocker
Place the Rocker onto the Spacer with the rounded side down. (this allows
the Antenna Base to match the angle of the Slanted Bezel)
Place the antenna assembly through the opening on the fender.
Step #4 Add the Rubber Gasket and Slanted Bezel
With the antenna assembly placed through the fender, add the Rubber Gasket
and then the Slanted Bezel.
Step #5 Add the Antenna Nut
Add the Antenna Nut onto the top of the antenna assembly. DO NOT
OVERTIGHTEN.
Step #6 Assemble the Antenna Mast
Assemble the Antenna Mast by threading the Antenna Adapter into the bottom
of the Antenna Mast. The fine threads go into the mast. Then thread the Nut
onto the end of the Antenna Adapter. DO NOT OVERTIGHTEN.
Step #7 Complete the Installation
Complete the installation by threading the Antenna Mast assembly into the
Antenna Base.
7470 Commercial Way, Henderson, NV 89011
- ©2021 Retro Manufacturing, LLC
- Published: 04/13/21
- www.retromanufacturing.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>