RetroSound Apache Radio Face User Guide
- June 6, 2024
- RetroSound
Table of Contents
RetroSound Apache Radio Face User Guide
What’s in the Box
Apache Face
Shafts
Hardware
Installation
Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the
Radio Face to the Radio Motor with the four small screws.
Refer to the user’s manual included in your motor box or on our website for
more comprehensive instructions.
Control Layout
Apache Mode
To set up your radio to function with the Apache Radio Face, press and hold
the Right-Front
Knob(3) for three seconds to access the sub-menu system. Rotate the Right-
Front Knob(3) to cycle through the choices until SEL PANEL appears. Press and
release the Right-Front
Knob(3) to select between APACHE and NORMAL. With APACHE displayed on the
screen, let the unit time out to set.
Radio Presets
Setting Radio Presets
To store a preset on the Apache Radio Face, rotate the Right-Front Knob(3) to
tune to the desired station, then rotate the Right-Rear Knob(4) clockwise to
select the desired preset
(1-6). Once selected, press the Right-Front Knob(3) to store.
Recalling Radio Presets
To recall a preset, turn the Right-Rear Knob(4) clockwise and release. Repeat to move through the saved presets.
Basic Operation
Power On/Off
Press the Left-Front Knob(1) to power the unit on.
Press and hold the Left-Front Knob(1) to power the unit off.
Volume
Rotate the Left-Front Knob(1) to change the volume.
Changing Source Modes
Rotate the Left-Rear Knob(2) clockwise to cycle through the source modes.
Changing Radio Bands
Rotate the Right-Rear Knob(4) counter-clockwise to cycle through the radio bands.
Tune
Rotate the Right-Front Knob(3) to scroll through the stations.
Mute On/Off
Press the Right-Front Knob(3) to mute and unmute.
Equalizer (EQ)
Press the Left-Front Knob(1) to enter the Tone Control sub-menu. Press and release the Left- Front Knob(1) until you see the EQ setting you’d like to adjust. Rotate the Left-Front Knob(1) to adjust the setting. Press the Left- Front Knob(1) to move to the next item, and repeat to adjust each option. Let the unit time out to set.
Setting the Clock
Press and hold the Right-Front Knob(3) to enter the System Settings sub-menu. Rotate the Right-Front Knob(3) to cycle through the choices until you see CLK, then press the Right- Front Knob(3) to select. Rotate the Right-Front Knob(3) to adjust the hours. Then press the Right-Front Knob(3) again to move on to minutes. Rotate the Right-Front Knob(3) to adjust the minutes. Let the unit time out to set.
Display Color*
Press and hold the Right-Front Knob(3) to enter the System Settings sub-menu. Rotate the Right-Front Knob(3) to cycle through the choices until you see SCAN, then press the Right Front Knob(3) to cycle through the colors. Let the unit time out to set.
Beep On/Off
Press and hold the Right-Front Knob(3) to enter the System Settings sub-menu. Rotate the Right-Front Knob(3) to cycle through the choices until you see BE