RetroSound 068REDM1BT Redondo RT M1B Digital Media Receiver With Bluetooth User Guide
- June 13, 2024
- RetroSound
Table of Contents
RetroSound 068REDM1BT Redondo RT M1B Digital Media Receiver With
Bluetooth
Product Information
The product is a Radio Motor with Thumb-Roller controls, designed to provide modern sound for classic cars. It comes with InfiniMount Brackets, Thumb- Rollers, hardware, and a modular cable.
Control Layout
- Left-Inside Thumb-Roller (1)
- Right-Inside Thumb-Roller (3)
- Left-Outside Thumb-Roller (2)
- Right-Outside Thumb-Roller (4)
- Preset Buttons (5)
Basic Operation
- Power On/Off : Press the Left-Inside Thumb-Roller(1) to power the unit on. Press and hold the Left-Inside Thumb-Roller(1) to power the unit off.
- Volume: Rotate the Left-Outside Thumb-Roller(2) up or down to change the volume.
- Changing Source Modes : Rotate the Left-Inside Thumb-Roller(1) down to cycle through the source modes.
- Changing Radio Bands : Rotate the Right-Inside Thumb-Roller(3) up to cycle through the radio bands.
- Tune: Rotate the Right-Outside Thumb-Roller(4) to scroll through the stations.
- Mute On/Off : Press the Right-Outside Thumb-Roller(4) to mute and unmute.
- Equalizer (EQ) : Press the Left-Outside Thumb-Roller(2) to enter the Tone Control sub-menu. Use the Left-Outside Thumb-Roller(2) to adjust the EQ settings.
- Setting Radio Presets : Press and hold the desired Preset Button(5) for two seconds to set a preset. To recall a preset, simply press the Preset Button(5) corresponding to the desired station.
- Setting the Clock : Press and hold the Right-Inside Thumb-Roller(3) to enter the System Settings sub-menu. Use the Right-Outside Thumb-Roller(4) to adjust the hours and minutes.
Redondo Mode
To set up the Radio Motor to function with the Redondo Thumb-Roller
controls
- Press and hold the Left-Inside Thumb-Roller(1) for approximately 15 seconds to reboot the radio into SEL PANEL mode.
- While holding the Power Button, the unit will display the following sequence : RETROSOUND > RADIO > GOODBYE > TIME DISPLAY > SEL PANEL. Continue holding the thumb-roller until SEL PANEL is displayed.
- Release the Left-Inside Thumb-Roller(1) and immediately press and release it to cycle through the choices until REDONDO appears.
- The display will flash REDONDO 5 times and then turn off. Your Radio Motor is now configured to work with your selected face.
For more comprehensive instructions, refer to the user manual included in your
motor box or visit our website.
Contact tech@retromanufacturing.com or
visit help.retromanufacturing.com for
further assistance.
What’s in the Box
Hardware
Installation
Attach each InfiniMount Bracket to the Radio Motor with the eight small screws.
Insert the Thumb-Rollers into the InfiniMount Brackets. Gently push to snap into place.
Complete the installation by plugging one end of the modular cable into the left Thumb-Roller and the other end of the modular cable into the left side of the Radio Motor. Then, repeat for the right Thumb-Roller on the right side. Use the optional hardware (if needed) to help mount the radio to the dash.
Modern Sound For Your Classic
tech@retromanufacturing.com | help.retromanufacturing.com
Control Layout
Redondo Mode
The following steps must be performed to set up the Radio Motor to function
with the Redondo Thumb-Roller controls. Press and hold the Left-Inside Thumb-
Roller(1) for approximately 15 seconds to reboot the radio into SEL PANEL
mode. While holding the Power Button the unit will display the following
sequence: RETROSOUND>RADIO>GOODBYE>TIME DISPLAY>SEL PANEL, continue holding
the thumb-roller until SEL PANEL is displayed. Once SEL PANEL is displayed
release the Left-Inside Thumb-Roller(1) and immediately press and release the
Left-Inside Thumb-Roller (1) to cycle through the choices until REDONDO
appears. The Display will Flash REDONDO 5 times and will turn off. Your Radio
Motor is now configured to work with your selected face.
Radio Presets
Setting Radio Presets
To set a preset, tune to the station you want to set the preset to, and then
press and hold the desired Preset Button(5) for two seconds.
Recalling Radio Presets
To recall a preset, simply press the Preset Button(5) your station was set to
previously.
Basic Operation
Power On/Off
Press the Left-Inside Thumb-Roller(1) to power the unit on.
Press and hold the Left-Inside Thumb-Roller(1) to power the unit off.
Volume
Rotate the Left-Outside Thumb-Roller(2) up or down to change the volume.
Changing Source Modes
Rotate the Left-Inside Thumb-Roller(1) down to cycle through the source modes.
Changing Radio Bands
Rotate the Right-Inside Thumb-Roller(3) up to cycle through the radio bands.
Tune
Rotate the Right-Outside Thumb-Roller(4) to scroll through the stations.
Mute On/Off
Press the Right-Outside Thumb-Roller(4) to mute and unmute.
Equalizer (EQ)
Press the Left-Outside Thumb-Roller(2) to enter the Tone Control sub-menu.
Press and release the Left-Outside Thumb-Roller(2) until you see the EQ
setting you’d like to adjust. Rotate the Left-Outside Thumb-Roller(2) up or
down to adjust the setting. Press the Left-Outside Thumb-Roller(2) to move to
the next item, and repeat to adjust each option. Let the unit time out to set.
Setting the Clock
Press and hold the Right-Inside Thumb-Roller(3) to enter the System Settings
sub-menu. Rotate the Right-Outside Thumb-Roller(4) to cycle through the
choices until you see CLK, then press the Right-Outside Thumb-Roller(4) to
select. Rotate the Right-Outside Thumb-Roller(4) up or down to adjust the
hours. Then press the Right-Outside Thumb-Roller(4) again to move on to
minutes. Rotate the Right-Outside Thumb-Roller(4) up or down to adjust the
minutes. Let the unit time out to setup .
**Display Color***
Press and hold the Right-Inside Thumb-Roller(3) to enter the System Settings
sub-menu. Rotate the Right-Outside Thumb-Roller(4) to cycle through the
choices until you see SCAN, then press the Right-Outside Thumb-Roller(4) to
cycle through the colors. Let the unit time out to set.
Beep On/Off
Press and hold the Right-Inside Thumb-Roller(3) to enter the System Settings
sub-menu. Rotate the Right-Outside Thumb-Roller(4) to cycle through the
choices until you see BEEP ON/OFF, then press the Right-Outside Thumb-
Roller(4) to choose between BEEP ON or BEEP OFF. Let the unit time out to set.
*Some features are not available on all radios.
Modern Sound For Your Classic
tech@retromanufacturing.com | help.retromanufacturing.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>