brother VC-500W Color Photo And Label Printer User Guide

brother VC-500W Color Photo And Label Printer User Guide

EN Before Using the VC-500W
Before using your Label Printer, read this guide, including the Important Safety Instructions, and keep it in a safe place. We recommend registering your Label Printer at www.registermybrother.com.

support.brother.com

Important Safety Instructions
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injuries.
Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks, rupture, overheating, abnormal odors, or smoke.

• Always use the suggested AC Adapter for your Label Printer and plug it into a socket with the specified voltage. Failure to do so could result in damage or failure of your Label Printer.
• Do not use your Label Printer during a thunderstorm.
• Do not use your Label Printer/AC Adapter in places of high humidity, such as bathrooms.
• Do not overload the cord.
• Do not place heavy objects on, damage, or modify the cord or plug. Do not forcibly bend or pull the cord.
• Make sure you fully insert the plug into the AC power outlet. Do not use a socket that is loose.
• Do not allow your Label Printer/AC Adapter/plug to get wet, for example, by handling them with wet hands or spilling liquids on them.
• Do not disassemble or modify your Label Printer/AC Adapter.
• Disconnect the AC Adapter immediately and stop using your Label Printer if you notice abnormal odor, heat, discoloration, deformation, or anything unusual while using or storing it.

CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injuries. Follow these guidelines to avoid personal injury, liquid leakage, burns, or heat.

• When you are not using your Label Printer, store it out of the reach of children. In addition, do not allow children to put your Label Printer parts or labels in their mouths. If any object has been swallowed, seek medical attention.
• Disconnect the AC Adapter if you do not intend to use your Label Printer.
• Do not drop or hit your Label Printer/AC Adapter.
• Do not hold or lift your Label Printer by the Roll Cassette. The Roll Cassette could come off and your Label Printer could fall and become damaged.
• Do not place your fingers inside the print output slot.

General Precautions

• Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, or the Color of the label may change or be transferred onto other objects. Before applying the label, check the environmental conditions and the material.
• Do not use your Label Printer in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to your Label Printer.
• Use a soft, lint-free dry cloth to clean your Label Printer; never use alcohol or other organic solvents.
• Do not place any foreign objects into the Roll Cassette slot, the print output slot, or AC Adapter Port.
• Do not place your Label Printer or AC Adapter in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (for example, on the dashboard or in the back of your car), high humidity, or dust. Doing so will damage the print head.
• Do not pull or apply pressure to the Roll Cassette to avoid damaging your Label Printer.
• The length of the printed label may differ from the displayed label length.
• Do not place the labels or product parts in your mouth.
• Do not attach labels to food or skin.
• Remove the protective film before using your Label Printer to avoid damaging the device.
• For information about your model’s electrical rating, see the label attached to the base of your Label Printer.
• The thermal head may become too hot if you print a large number of labels. The Label Printer will stop and resume printing once the print head has cooled down.
• Use genuine Brother accessories and supplies.
• Design and specifications are subject to change without notice.
• To check the specification of this product, see our website: support.brother.com.

Federal Communications Commission (FCC) Declaration of Conformity (For USA Only)

Responsible Party: Brother International Corporation 200 Crossing Boulevard Bridgewater, NJ 08807-0911 USA
TEL : 908-704-1700

declares, that the product
Product Name: Brother COLOR LABEL PRINTER
Model Number: VC-500W

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications; however, there is no guarantee that interference does not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning off and on the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

◾Reorient or relocate the receiving antenna.
◾Increase the separation between the equipment and receiver.
◾Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
◾Consult the dealer or an experienced radio/TV technician for help.
◾This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Important
◾Changes or modifications not expressly approved by Brother Industries, Ltd. could void
the user’s authority to operate the equipment. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Trademarks
Mac and AirPrint are trademarks of Apple Inc. App Store is a service mark of Apple Inc. Google Play™ is a trademark of Google LLC. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
The ZINK Technology and ZINK trademarks are owned by ZINK Holdings LLC. Used under license.

Components

1. 1. Roll Cassette (1″)

2. AC Adapter
3. Micro USB Cable
4. User’s Guide (this guide)
5. Cleaning Cassette

The Cleaning Cassette is not intended for printing. When inserted, it will start a cleaning cycle. When the cleaning cycle is complete and the Label Printer cuts the cleaning paper, remove and discard the paper. Use if streaks appear on your labels, or after every 20-30 prints for best performance.

1. Parts Description

1. Wi-Fi Button →  (see page 15)

2. Cassette Button → (see page 19)

3. Swipe-to-Cut Panel → (see page 18)

4. Power Button→  (see page 9)

5. Print Output Slot

6. AC Adapter Port

7. Micro USB Port

8. Roll Cassette Slot

2. Connect the Power Cord and Power On

1. 1. Insert the AC Adapter into the AC Adapter Port on the base of the label Printer.

2. Connect the AC Adapter and the cord. Then, plug the AC Power Cord into an AC power outlet.
3. Press and hold the Power   Button. When the LED lights stop flashing, go to the next step.

3. Load the Roll Cassette

1. 1. 1\. Unpack the Roll Cassette and remove the pull-tab in the direction shown by the arrows.

2. Insert the Roll Cassette into the slot at the back of your Label Printer until it locks into place. The Label Printer ejects a small
   piece of paper when each Roll Cassette is used for the first time, to complete the loading process.

3. When loading is complete, the Cassette Button’s LED stops blinking and remains lit.

Download and install Brother Color Label Editor to print from your mobile device.

 4. Download Brother Color Label Editor

1. 1. Download and install our free application Brother Color Label Editor from the [App Store](https://apps.apple.com/us/app/brother-color-label-editor/id1349574643) or [Google Play](https://play.google.com/store/apps/details?id=com.brother.colorlabel.editor&hl=en&gl=US)™.

2. For detailed information on the Brother Color Label Editor app, please refer to the Help button ( ?).

5. Print Using P-touch Editor

For Windows
1. To use your Label Printer with your computer via USB or Wi-Fi, install
P-touch Editor and the Printer Driver. To download and install printer drivers and software, visit our website.
install. brother
2. Start P-touch Editor.
For Windows 10:
Click Start > Brother P-touch > P-touch Editor 5.2 or double-click P-touch Editor 5.2 on the desktop.
For Windows 8/Windows 8.1:
From the Apps screen, click P-touch Editor 5.2 or double-click  P-touch Editor 5.2  on the desktop.
For Windows 7:
Click  Start > All Programs > Brother P-touch > P-touch Editor 5.2 or double-click  P-touch Editor 5.2  on the desktop. Mac Users, please see the next page.

For Mac

1. 1. To use your Label Printer with your computer via USB or WIFI connect and add an Air Print printer and install P-touch Editor. To download and install software, visit your model’s Downloads page at [support.brother.com](https://support.brother.com/g/b/countrytop.aspx?c=in&lang=en)

2. On your computer, double-click  Macintosh HD > Applications, and then double-click the  P-touch Editor  icon.

6. Connect Wirelessly

Press and hold the Wi-Fi   Button on your Label Printer for two seconds to switch between Wireless Direct, Off, and Infrastructure Modes.

1. Wireless Direct Mode (LED=white)
   Wireless Direct Mode allows your device to connect directly with your Label Printer. Select the “Brother VC-500W ####” network in the Wi-Fi setup of your device (where #### is the last four digits of the machine’s serial number, located on its base). (NOTE: You will not have internet access in this mode.)

2. Infrastructure Mode (LED=blue)
   Infrastructure Mode allows your Label Printer to print wirelessly through your Wi-Fi network. To start this mode, see the Infrastructure Mode Configuration in the Manuals section of our website: support.brother.com/manuals

7. Cut Mode

There are two cutting methods available:
*Manual Full Cut*  – used to manually cut each printed design.
Auto Full Cut**  – used to automatically cut each printed design.

From the Brother Color Label Editor App: Tap  Settings  > Select Cut Mode at  Batch Print Cut Mode.

 8. Manual Full Cut

1. 1. When a label is printed, the swipe-to-cut panel lights will blink left to right.

2. Swipe your finger across the panel to cut the printed label.

9. Remove the Roll Cassette

Press and hold the Cassette Button ( ). When the cassette button’s LED is off, remove your Roll Cassette by lifting it up and slightly away from your Label Printer.
NOTE: Do not try to remove a Roll Cassette when the LED is blinking or remains lit. If the Roll Cassette is removed while the LED is blinking, some of the label may advance.

Wi-Fi Button

Cassette Button

Swipe-to-Cut Panel

10. LED Indications

11. Update Your Label Printer

For the latest updates and features, update your label printer’s firmware. From the Brother Color Label Editor App:

Tap  Settings > Full Setup to connect the app and your printer to the same Wi-Fi network.

1. Android: When your app and your Label Printer are connected, tap  Settings > Advanced > Get Info > Check.
   iOS: When your app and your Label Printer are connected, tap  Settings > Get Info > Check.

For Windows / Mac:
To update the firmware manually, visit the Brother Solutions Center at support.brother.com.
Select your region /country > FAQs & Troubleshooting > Search by Model Name / Search by Product Category

Read More About This Manual & Download PDF:

References

• setup.brother.com | Official Machine setup site | Brother
• Brother Solutions Center
• Product Information and Product Registration | Brother

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>