LG W11422896B Extended Drain Hose Kit Instruction Manual
- June 9, 2024
- LG
Table of Contents
LG W11422896B Extended Drain Hose Kit 
Instructions for Installation
Tools Supplied
Open the extension kit and check that all parts were included.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or electrical shock.
| Step | Description | Figure |
|---|---|---|
| 1. | Unplug machine or disconnect power before servicing. | **** |
| 2. | Remove Drain Hose outlet from the collection tank fitting. | **
Step| Description| Figure
---|---|---
3.| Slowly but firmly pull out the drain hose from its fitting in the pump
outlet. Discard the drain hose.| 
4.| Slowly but firmly push the longer drain hose on the fitting of the pump
outlet.| **
5.| Plug in machine or connect power after servicing.| ****
6.| Insert hose so that the end of the hose extends 4.5″ (114 mm) into the
standpipe.
Floor standpipe drain system:
Minimum diameter for a standpipe drain: 2″ (51 mm). Top of standpipe must be
at least 30″ (762 mm) high; install no higher than 36″ (910 mm) from bottom of
dryer.
|
7.| Be certain not to kink the extension drain hose when moving the dryer into
position.|
®/TM ©2021 Whirlpool. All rights reserved. Used under license in Canada.