KOBALT KPH 3580-06, KPH 2080-06 80V Pole Hedge Trimmer User Manual

KPH 3580-06, KPH 2080-06 80V Pole Hedge Trimmer
User Manual ITEM # 2139154/2139153/3650165
MODEL # KPH 3580-06/KPH 2080-06

ATTACH YOUR RECEIPT HERE
Serial Number……………………………
Purchase Date……………………………

PRODUCT SPECIFICATIONS

PACKAGE CONTENTS

HARDWARE CONTENTS (not shown actual size)

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

makes per minute
| Alternating Current| Type of current
| Direct Current| Type or a characteristic of current
| Read the Operator’s Manual| To reduce the risk of injury, user must read and understand operator’s manual before using this product.
| Safety Alert| Precautions that involve your safety.
| Sharp Blade| Keep hands away from sharp, moving blades.
| Wet Conditions Alert| Do not expose to rain or use in damp locations
| Wear eye protection| Wear eye protection with side shields that are marked to comply with ANSI Z87.1 when operating this equipment.
| Wear Head Protection| Wear an approved safety hard hat to protect your head.
| Gloves| Wear non-slip, heavy duty gloves.
| Keep Tool Away from Electrical Lines/Keep Bystanders Away| DANGER! Risk of electrocution! Keep tool 50 ft. away from  electrical lines. Keep all bystanders at least 50 ft. away.

Save these Instructions
The following signal words and meanings are intended to explain the levels of risk associated with this product.

avoided, will result in death or serious injury.
| WARNING| Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
| CAUTION| Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
| CAUTION| (Without Safety Alert Symbol) Indicates a situation that may result in property damage.

WARNING

• To avoid serious personal injury, do not attempt to use this product until you have read this Owner’s Manual thoroughly and understand it completely. If you do not  understand the warnings and instructions in this Owner’s Manual, do not use this product. Call 1-888-356-2258 for assistance.
• The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation,  always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend a wide vision safety mask for use over  eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

**** SAFETY INFORMATION

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool’ in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or  fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• A battery-operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable  for one type of battery may create a risk of fire when used with another battery.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is arthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Use a battery-operated tool only with specified battery pack. Use of any other batteries may create a risk of fire.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
• Use only Kobalt 80-volt batteries. (KB 280-06, KB 2580-06, KB 380-06, KB 280C-06, KB 2580C-06, KB 380C-06)
• Use only Kobalt 80-volt chargers. (KRC 30-06, KRC 80-06,KRC 0280-06)

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool.
  Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in  serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection used  for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying  power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

Always wear eye protection. A hedge trimmer can throw foreign objects into your eyes which could cause permanent eye damage. Always wear safety goggles with side shields that are marked to comply with ANSI Z87.1. Ordinary eyeglasses have only impact-resistant lenses; they are not safety goggles.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was  designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce  the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools  are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If  damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits, etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use  of the power tool for operations different from those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

• Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.
• A charger that is suitable for one
• Use of any other battery packs
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection  from one terminal to another.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact ejected from the battery may cause irritation or burns.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

HEDGE TRIMMER SAFETY WARNINGS

• Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury.
• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when  clearing jammed material. Blades coast after turning off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring or its own cord. Cutter blades contacting a “live” wire may  make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• DANGER – Keep hands away from blade. Contact with blade will result in serious personal injury.
• Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.

EXTENDED-REACH HEDGE TRIMMER SAFETY WARNINGS

• Do not use the extended-reach hedge trimmer in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
• To reduce the risk of electrocution, never use near any electrical power lines. Contact with or use near power lines may cause serious injury or electric shock resulting in  death.
• Always use two hands when operating the extended-reach hedge trimmer. Hold the extended-reach hedge trimmer with both hands to avoid loss of control.
• Always use head protection when operating the extended-reach hedge trimmer overhead. Falling debris can result in serious personal injury.

WARNING
Only use with handle and guard properly assembled to hedge trimmer. Use of the hedge trimmer without the proper guard or handle provided may result in serious personal injury.

WARNING (PROPOSITION 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other  reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
  Your risk of exposure to these chemicals varies depending on how often you do this type of work.
  To reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 3 minutes
UNPACKING

• This product has been shipped unassembled.
• Carefully remove the product and any accessories from the box. Make sure that all items listed in the Package Contents list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
• If any parts are damaged or missing, please call 1-888-3KOBALT (1-888-356-2258) for assistance.
  You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

WARNING

• If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.
• Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result  in a hazardous condition leading to possible serious personal injury.
• Do not install the battery until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

KNOW YOUR POLE HEDGE TRIMMER

ASSEMBLY INSTRUCTIONS

1. Connect the upper tube and the lower tube
a. Align the arrow on the end of the lower tube (K) with the arrow on the upper tube (M). Connect both tubes together.
b. Rotate the collar (L) toward the locked symbol to secure the tubes together.

WARNING
Periodically check the connections to ensure that they are tightened securely.

2. Attach the auxiliary handle
a. Position the front/auxiliary handle (A) onto the lower portion of the trimmer section by sliding over the lower tube (K).
b. Once the front handle is in the desired position, align the hole on the handle with the hole on the bracket (BB), then slide the bolt (CC) through the top of the handle and secure with the fastening knob (AA). Tighten until there is no movement in the handle.
c. The front handle can be adjusted to a suitable position.

Hardware Used

3. Strap
a. Rotate the strap harness to the upward position.
b. Hook the strap to the strap connection.

4.Battery
IMPORTANT: The battery may not be fully charged when purchased. Before using the pole hedge trimmer for charge. Make sure to read all safety precautions and follow the instructions in the battery and charger manuals.
4a. To install the battery:
a. Align the battery with the battery compartment.
b. Insert battery into the battery compartment until battery release button (G) locks into place. You should hear a “click” once it is installed.
4b. To remove the battery:
a. Press the battery release button (G) on the battery compartment.
This will cause the battery to raise out of the tool slightly.
b. out of the tool.

OPERATING INSTRUCTIONS

1. Holding and controlling the pole hedge trimmer
   • Always hold the hedge trimmer firmly with both hands on the handles. Make sure you always have good balance and secure footing.
   • Wrap your fingers and thumbs around the handles. Place one hand on the front/auxiliary handle and the other on the rear handle.

2. Starting and stopping the pole hedge trimmer
   • Push forward on the safety lock button (J), making sure it is in the unlocked position.
   • Squeeze the trigger switch (R) to start.
   • Release the trigger switch (R) to stop.

3. Adjusting the trimmer head angle The trimmer head pivots 135° and can be locked into 7 positions within that range.
   a. Pull back on the pivot button (N).
   b. While pulling the pivot button, move the head forward or backward.
   c. Release the pivot button once the trimmer head is in the desired position.
   d. The trimmer head should lock securely in place.

4. Tips for optimum use

• Start by trimming the top of the hedge. Slightly tilt the tool (up to 15° relative to the line of cut) so that the blade tips point slightly toward the hedge. This will cause the  blades to cut more effectively. Hold the tool at the desired angle and move it steadily along the line of cut. The double-sided blade allows you to cut in either direction.
• In order to obtain a very straight cut, stretch a piece of string along the length of the hedge at the desired height. Use the string as a guideline, cutting just above it.
• In order to obtain flat sides, cut upward with the growth. Younger stems move outward when the blade cuts downward, causing shallow patches in the hedge.
• Take care to avoid any foreign objects. Especially avoid hard objects such as metal wire and railings, as these could damage the blades.
• Regularly oil the blades.

CARE AND MAINTENANCE

Pole Hedge Trimmer Blade Maintenance
Note: Before performing maintenance, remove the battery from the hedge trimmer.

1. Remove dirt and debris from blades using a small dry paint brush or equivalent (not included).
2. Clean blades by spraying an appropriate degreaser (not included) on the blades and cutting bar.
3. After heavy use, it is recommended to thoroughly check your blades for deformation or imperfections and, if included).
4. After each blade is sharpened, it is required to apply a light machine oil or lithium-based spray-on grease (not included) to the blades.

Transporting and storing

• Always place the blade cover on the blade before storing or transporting the pole hedge trimmer. Use caution to avoid the sharp teeth of the blade.
• Clean the pole hedge trimmer thoroughly before storing. Store the pole hedge trimmer indoors, in a dry place that is inaccessible to children. Keep away from corrosive  agents such as garden chemicals and de-icing salts.

TROUBLESHOOTING

If you still have questions or an unresolved issue after going through this troubleshooting guide, or just want to speak to a Kobalt product expert, please call our customer  service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. – 8 p.m., EST, Monday – Sunday.

secure.
2.Battery is not charged.| 1.To secure the battery, make sure the latch on the top of the battery compartment snaps into place.
2.Charge the battery according to the instructions included with your model.
Motor runs, but cutting blades do not move.| Pole hedge trimmer damaged.| Do not use the pole hedge trimmer. Call 1-888-3KOBALT (1-888-3562258) for technical service.
Pole hedge trimmer smokes during operation.| Pole hedge trimmer damaged.| Do not use the pole hedge trimmer. Call 1-888-3KOBALT (1-888-356-2258) for technical service.
Motor hums, blades do not move.| Debris or other may be jamming the blades.| Remove battery, clear debris blockage from blades.

WARRANTY

5-YEAR LIMITED WARRANTY
This Kobalt 80 V Pole Hedge Trimmer is warranted to the original purchaser from the original purchase This Kobalt 80 V Pole Hedge Trimmer is warranted for the original  user to be free from defects in material and workmanship.
warranty period, simply return the 80 V Pole Hedge Trimmer along with proof of purchase to the place of purchase for a free replacement or refund, or call 1-888- 3KOBALT (1-888-356-2258) for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or alterations which have been made or attempted by others or the unauthorized  use of nonconforming parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool beyond capacity), improper maintenance, neglect or  accident; or the damage is due to the use of the tool after partial failure or use with improper accessories or unauthorized repair or alteration. state.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. – 8 p.m., EST, Monday – Sunday.
You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

**** Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. – 8 p.m., EST, Monday -Sunday.

You could also contact us at
partsplus@lowes.com or
visit www.lowespartsplus.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>