PHOINIKAS Q10 Portable Detachable Gaming Headset User Manual

PHOINIKAS Q10 Portable Detachable Gaming Headset

Product parameters

Headset

Accessories

|

Headset/ Usb Charging Cable/line In Connection Cable

Charging time| 3 Hours

Connect to Bluetooth earphone

1. Connected: continuously press button (about 3s), when indicator lights’ lighting red and blue color separately, turn on the  bluetooth function of your mobile or other’s equipment, and start to search or scan, when searched “PHOINIKAS Q10” and connected, the indicator lights will shine every five seconds,connected successfully.
2. Connected: when indicator lights’ lighting red and blue color separately, turn on the bluetooth function of your mobile or other’s equipment, and start to search or scan, when searched “PHOINIKAS Q10” and connected, the indicator lights will shine every five seconds, connected successfully.
3.  Playing mode:indicator lights will shine one time every five seconds.
4. Unconnected mode: indicator lights will shine two times every five seconds, and after 10 minutes, earphone will turn off automatically. (The LED lights need to be closed by manual)
5. Turn off : continuously press button ( about 5s), when heard sounding of “DU DU DU …”, indicator lights will be off . (The  LED lights need to be closed by manual)

Function introduction

1. Volume “-”(previous song), press once to previous song, llong press and not release to reduce volume, and when volume comes to minimum, there will be deep tone;
2. Dial/Answer/Hang up button; Pause/Play button/
3. Power button; Volume “-”(next song), press once to next song,long press and not release to increase volume, and when volume comes to maximum, there will be deep tone;
4. LED light on-off button;
5. Indicator light;
6. USB charging interface;
7. Line In interface;
8. Line cable triple plug, insert in headset Line interface;
9. One mute button;
10. Microphone;
11. Slide voice controllor;
12. Line quadri plug, applies to the 3.5 quadrupole single jack audio device such as mobile phone, tablet PC, notebook computer, etc.

Use Occasion

1.  Free to use for wire of wireless.
2. Wireless mode:
3. Wire mode :

Other functions

1. When Line In inserting is detected, switch to Line In mode, disconnect Bluetooth and all indicator lights are off. When pull out Line In, reboot and connect to Bluetooth automatically;
2. Low voltage alarming, when the voltage is under 3.3V, it makes “beep” alarming. Insert the DC power source and it works normally;
3. Undervoltage automatic power off, when the voltage is under 3.3V, Bluetooth automatically turns off the device. And after re-charging, press the power button to reboot.
4. Intelligent charging management, insert the DC power source, red light of two-color LED indictor light is on. When charging is completed, red light is off.
5. When has incoming call, music will be cut off automatically , and press button , answer the phone. When hang off, press button , and will connect with music automatically.When the guy who call and hang off first, without any operate, music will connect automatically.
6. When playing music, continuously short press the phone button twice to redial the last incoming call or outgoing call.

The connection between the Bluetooth headset and computer

1. If the computer does not come with Bluetooth capabilities, please purchase additional Bluetooth adapter;
2. Insert the Bluetooth adaptor in the USB interface of computer, install Bluetooth adapter driver according to the computer tips, and the specific steps are as follows:
3. Open the control panel and select the “Sounds and Audio Devices”
4. Select the “Audio” tab, and select the installed Bluetooth sound device in the “Playback Device” and “Recording Device” , and select OK after setting and then exit.
5. hen select the “Voice” tab, and select the installed Bluetooth sound device in the “Playback Device” , and select OK after setting and then exit.
6. Open the Bluetooth management software, and press the function button on the Bluetooth headset for about ten seconds. When the two-color indicator light flashes alternately every few seconds, it indicates that the Bluetooth headset is in pairing state, only in this case, Bluetooth adapter is likely to search for the Bluetooth headset;
7. Click “My Bluetooth” and select “Search for Bluetooth Devices” to search the surrounding Bluetooth devices such as Bluetooth headset;
8. If there are Bluetooth devices nearby, then the searched devices will be listed;
9. Right-click on the searched device and then select “pairing”;
10. Enter “0000” as the pairing code in the dialog box;
11. If the computer comes with a Bluetooth adapter, and the drivers and software are installed, first start searching. If the Bluetooth headset is searched, connect directly and try the Bluetooth headset, if there is sound, then setting is successful.

Anomalies Solutions

1. The mobile phone can’t search the Bluetooth headset?

2. Confirm if Bluetooth headset is power on or off (if power on, blue and red indicator light flash alternately)

3. If it is power on and still can’t search, please reboot Bluetooth and mobile phone.

4. After connecting the Bluetooth headset and mobile phone, disconnection or noise occurs?

5. Bluetooth power is low, you need to charge the Bluetooth headset as soon as possible;

6. There is obstruction between the phone and the Bluetooth or the distance exceeds the signal reception distance, please do not put your hand on the Bluetooth. And in order to maintain the continuous stability of the signal, please try to keep the Bluetooth and mobile phone in the same direction.

7. Whether other Bluetooth phone users may hear my conversation?
   When pairing the headset with a Bluetooth mobile phone, the dedicated linking route will be created for these two Bluetooth devices only. According to the Bluetooth technology used for headset, it is not easy for the third parties to monitor the conversations, and the RF power of Bluetooth wireless signal is far less than that of normal mobile phone, so these signals are difficult to be detected by third parties.

8. What happens when the distance between mobile phone and Bluetooth headset exceeds the effective distance?
   When the distance between mobile phone and Bluetooth headset exceeds the effective distance, the connection between mobile phone and Bluetooth headset will be broken automatically. When it comes back in the effective distance, mobile phone and Bluetooth headset will be connected automatically without any setting. But some phones do not support this function, and the Bluetooth device should be searched in the design list and then connect.

9. How to charge the Bluetooth headset?
   

10. Insert the charger plug in the headset, and put the release label side of the charger down, and put the headset right side up;

11. Insert the other end of the charger into a power outlet, when charging, the headset indicator is on until the end of charging. The first charging takes about eight hours, and about three hours afterwards;

12. When charging is completed (indicator is off), remove the charger from the power outlet, and press the release button on the charger plug, and remove the charger from the headset. (Note: When you are driving a vehicle, charge the Bluetooth headset with the original vehicle power charger.).

Material particulars

1. In order to avoid damage to your hearing, please limit the time using the headset at high volume, and set the volume at a safe level. The higher the volume is, the shorter of safe listening time;
2. If you are in potentially hazardous sites, please stop using the headset to prevent damage or malfunction;
3. Please do not expose the headset in high-temperature places, such as in the vicinity of heating facilities or in the car exposed in direct sunlight;
4. Please do not immerse the headset in water;
5. Please do not use any alcoholic ammonia for cleaning. If necessary, please use soft cloth to clean it;
6. Do not store the headset where the temperature is below -15 degrees or above 35 degrees. The battery life may be shortened at low temperatures;
7. Please use the specified USB charging device. (Charging voltage DC4.75V-5.5V)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>