RetroSound 068DENM1BB Radio Face User Guide
- June 13, 2024
- RetroSound
Table of Contents
Radio Face Quick Start Guide
What’s in the Box
Denver Radio Face
(Vintage Overlay sold separately)
Shafts
x(2)
Hardware
x(4) x(8) x(6)
Installation
- Backstrap must be mounted securely
- Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the Radio Face to the Radio Motor with the four small screws.
The 248 Gasket (packaged separately) may be needed for some installations. If needed, add the 248 gasket to the Radio Face before installing the radio into the dash.
Refer to the user manual included in your motor box or on our website for more comprehensive instructions.
Control Layout
(Vintage Overlay sold separately)
- Left-Front Knob
- Left-Rear Knob
- Right-Rear Knob
- Right-Front Knob
- Preset Buttons
Radio Presets
Setting Radio Presets
To set a preset, tune to the station you want to set the preset to, and then
press and hold the desired Preset Button( 5 ) for two seconds.
Recalling Radio Presets
To recall a preset, simply press the Preset Button( 5 ) your station was
set to previously.
Basic Operation
Power On/Off
Press the Left-Front Knob( 1 ) to power the unit on.
Press and hold the Left-Front Knob( 1 ) to power the unit off.
Volume
Rotate the Left-Front Knob( 1 ) to change the volume.
Changing Source Modes
Rotate the Left-Rear Knob( 2 ) clockwise to cycle through the source
modes.
Changing Radio Bands
Rotate the Right-Rear Knob( 4 ) counter-clockwise to cycle through the
radio bands.
Tune
Rotate the Right-Front Knob( 3 ) to scroll through the stations.
Mute On/Off
Press the Right-Front Knob( 3 ) to mute and unmute.
Equalizer (EQ)
Press the Left-Front Knob( 1 ) to enter the Tone Control sub-menu. Press
and release the Left Front Knob( 1 ) until you see the EQ setting you’d
like to adjust. Rotate the Left-Front Knob( 1 ) to adjust the setting.
Press the Left-Front Knob( 1 ) to move to the next item, and repeat to
adjust each option. Let the unit time out to set.
Setting the Clock
Press and hold the Right-Front Knob( 3 ) to enter the System Settings sub-
menu. Rotate the Right-Front Knob( 3 ) to cycle through the choices until
you see CLK, then press the RightFront Knob( 3 ) to select. Rotate the
Right-Front Knob( 3 ) to adjust the hours. Then press the Right-Front
Knob( 3 ) again to move on to minutes. Rotate the Right-Front Knob( 3
) to adjust the minutes. Let the unit time out to set.
**Display Color*
Press and hold the Right-Front Knob( 3 ) to enter the System Settings sub-
menu. Rotate the Right-Front Knob( 3 ) to cycle through the choices until
you see SCAN, then press the Right Front Knob( 3** ) to cycle through the
colors. Let the unit time out to set.
Beep On/Off
Press and hold the Right-Front Knob( 3 ) to enter the System Settings sub-
menu. Rotate the Right-Front Knob( 3 ) to cycle through the choices until
you see BEEP ON/OFF, then press the Right-Front Knob( 3 ) to choose
between BEEP ON or BEEP OFF. Let the unit time out to set.
*Some features are not available on all radios.
Modern Sound For Your Classic
tech@retromanufacturing.com |
help.retromanufacturing.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>