anslut MK-020011009846 Dimmable Globe LED Bulb Instruction Manual

anslut MK-020011009846 Dimmable Globe LED Bulb

Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com.

This declaration of conformity is issued under the sole responsibility of the manufacturer.

LIGHT SOURCE

• Conforms to the following directives, regulations and standards.

IEC 55015:2019+A11, EN 61547:2009, EN IEC 61000-3-2:2019+A1, EN 61000-3-3:2013+A2, EN 300 328 V2.2.2:2019, EN 62311:2008, EN 50665:2017, EN 50663:2017, EN 62560:2012+A11, EN 62493:2015
Eco design Directive 2009/125/EC|
Lightsource Regulation (EU) 2019/2020|
RoHS 2011/65/EU + 2015/863| EN 50581:2012

• This product was CE marked in year.
• Signed for and on behalf of.

SAFETY INSTRUCTIONS

• The product is only intended for indoor use.
• The product must only be serviced by qualified personnel, otherwise there is a risk of electrical accidents.
• Check that the mains voltage corresponds to the rated voltage on the type plate.

WARNING!

• Do not allow children to use the product.
• Do not dismantle the product or attempt to repair it. The product does not contain any parts that can be repaired by the user. Repairs must be carried out by an authorised service centre.
• The product must only be used for its intended purpose and in accordance with these instructions.
• Do not use the product if it is damaged or not working properly, or if the power cord or plug are damaged. Discard the product if it is damaged and replace with a new one.
• Do not expose the product to rain or moisture. Do not touch the power cord or the plug with wet hands.
• Do not subject the product to knocks and blows.

SYMBOLS

| Read the instructions.
| Not suitable for use in damp areas
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

• Rated voltage: 230 V, 50 Hz
• Power: 4.5 W
• Temperature range: -20 – 40°C
• Diffusion angle: 220°
• Frequency: 2.4 GHz
• Socket: E27
• Colour rendering index: CRI 80
• Colour temperature: 1800 K
• Colour tone: Extra warm white
• Equivalent x W incandescent bulb: 20 W
• Luminous flux: 200 lm 360°
• Life span: 20000 h
• Dimmable: With app

DESCRIPTION

• This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant.
• Does not require a separate hub/router.
• You can control all SMART products in the app and use functions such as timer control, scheduling and automatised events.

SYSTEM REQUIREMENTS
Check that the smartphone is connected to the 2.4 GHz WiFi network and switch on the light. WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher). Compatible with Google Assistant, Amazon Alexa and others.

USE

INSTALL APP

1. Scan the QR code to download the Smart Life app. Or search on App Store or Google Play. FIG. 1
2. Register an account using your mobile phone number or email address. A verification code will be sent via SMS or email. Enter the code in the app and choose a password. If you already have an account, log in using your mobile phone number or email address and password. FIG. 2

CONNECT PRODUCT

1. Check that the phone is connected to the WiFi network and that the light is switch on.

2. The light source should flash rapidly on connection to the WiFi network. If the light source does not flash rapidly when the light is turned on with the switch, turn it on and off quickly three times to put the light in pairing mode.

3. Press + (add unit), select a suitable product category and follow the instructions on the screen.
   FIG. 3
   FIG. 4

4. Check that the LED light source is flashing rapidly (two times per second). If the LED light source does not flash, turn it on and off 3 times with the switch so that the LED light source starts flashing.

5. Confirm WiFi network and password.

NOTE
Only Wi-Fi 2.4 GHz is supported.

• The app finds the lamp and registers it on the account.
• Enter the name for the unit.

NOTE
The unit name is also used by Amazon Alexa and Google Assistant.
FIG. 5
FIG. 6

NOTE

• Do not disconnect the power to the lamp when it is connected to the WiFi network. Use always the app to switching the lamp on and off.
• Activate Bluetooth on the smartphone before connecting the lamp.

MAINTENANCE

• Clean the outside of the lamp unit with a dry cloth.

NOTE

• Do not use solvents, or strong or abrasive detergent.
• Do not attempt to clean the inside of the lamp.

www.jula.com.

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>