logitech YETI GX Dynamic RGB Gaming Mic User Guide
- October 31, 2023
- Logitech
Table of Contents
YETI GX
Dynamic RGB Gaming Mic with LIGHTSYNC SETUP GUIDE 
SETUP INSTRUCTIONS
SETUP 1
- Mount your new Yeti GX microphone to either the included desktop stand or a boom arm
- Plug in the USB-C end of the cable to the port at the bottom
- Plug the USB-A end of the cable into your computer
SETUP 2
IMPORTANT!
Be sure the flat part of the windscreen is pointing towards you!
SETUP 3
- Open any streaming or recording software with audio configuration
- Within the settings of the software, you may need to select Yeti GX as the active microphone
SETUP 4
The scroll wheel adjusts your microphone gain While speaking in a normal voice
that you would use while streaming or recording, adjust the gain by scrolling
the wheel
Scrolling the wheel up will increase gain while scrolling down will reduce
gain
SETUP 5
The LED on the scroll wheel also indicates if the mic is being used
- Solid white means your mic is powered on
- Solid green means your mic is actively delivering audio
- Flashing red means your gain level is too high and causing clipping or distortion so it’s best to turn it down
- Solid red means your microphone is muted (press the mute button by the scroll wheel to mute or unmute
SETUP 6
After you are happy with the gain setting, click the wheel in to enable Smart
Audio Lock The LED on the wheel will turn Cyan when enabled Smart Audio Lock:
smartly adjusts your gain by using an analog limiter to prevent clipping and a
downward expander to reduce ambient background noise The microphone to hold
your level where it is, greatly reducing the chance for clipping or distortion
When enabled, the scroll wheel will not change gain Click again to unlock
before making any changes
SETUP 7
Download G HUB for full setup and customization of audio and lighting settings
SETUP 8
- Click the Microphone menu in G HUB to access BlueVo!ce presets, effects, and processing like EQ and noise reduction You can also enable the Smart Audio Lock from this screen
- To try different settings, first record a sample of your voice, then press play You will then hear the recording you just made with the current BlueVo!ce settings From here you can apply different presets, settings, and effects Any changes you make will be applied to the recording so you can hear exactly what your audience will hear
- Click the LIGHTSYNC menu in GHub to customize the lighting in the RGB ring and G logo
- Choose from easy presets, or use the freestyle and animation tabs for full customization
QUESTIONS?
©2023 Logitech Logitech, Logitech G, Logi and their respective logos are
trademarks or registered trademarks
of Logitech Europe S A and/or its affiliates in the U S and other countries
All other trademarks are the property
of their respective owners Logitech assumes no responsibility for any errors
that may appear in this manual
Information contained herein is subject to change without notice The
Bluetooth®
word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by
Logitech is under license
WEB-621-002455 002