Yemmight ZC07 Magnetic Wireless Headphone User Manual
- June 12, 2024
- Yemmight
Table of Contents
Yemmight ZC07 Magnetic Wireless Headphone
Product Information
- Product Name: Headphone
- Included in the package: USB charging cable
- Keys: Volume down/ Previous track/Bluetooth mode and TF card mode switch (- key) and On/Off/Volume up/ Next track/Pause (+ key)
- Other Features: LED indicator, Microphone, Charging contact
- Charging Requirements: USB cable to connect to the USB port on your computer or any other standard USB-compatible charging device. Use a 5V/1A or above adapter (not included) for charging.
- Power Source: Rechargeable battery
Product Usage Instructions
- For a better experience, fully charge your headphones before use.
- Use the USB cable in the package to connect to the USB port on your computer or any other standard USB-compatible charging device.
- Use a 5V/1A or above adapter (not included) for charging. Note: Only use the computer USB output or standard 5 volt power adapter for charging. Damage may occur if a non-standard power adapter is used for charging, it may cause damage. Do not charge if connector or device if it is wet or damaged.
- Power On: In power off mode, press and hold the + key for 3 seconds to power on the headphone, and the blue light will go on, you will hear the power on tone.
- Power Off: To power off the headphone, press and hold the+ key for 5 seconds, and the indicator turns off, you hear a shutdown tone Note: If no Bluetooth device is connected, the headphone will automatically shut down after 5 minutes.
- After the headphone is turned on, it automatically enters the mode to be connected, and the red/ blue light flashes alternately. Enable the Bluetooth function of the phone and search for ZC07 to connect. After the connection is successful, you will hear the prompt tone and the blue light will flashes every 10 seconds.
- When playing music, press the + key to increase the volume and press the – key to decrease the volume. Note: When the volume is increased to the maximum or decreased to the minimum, a beep sound will appear.
- Play/Pause: When playing music, double click + to pause the play, and press any key again to continue the play.
- Next song: Press and hold the + key for 2 seconds to go to the next song.
- Previous song: Press and hold the – key for 2 seconds to switch to the previous song.
- Answer an incoming call: Short press the+ key to answer the call.
- Reject an incoming call: Press and hold the+ key for 2 seconds to reject an incoming call.
- Hang up: Press and hold the + key for 2 seconds to end the call.
- When the headphone is powered on, press and hold the + / – keys for 5 seconds at the same time to clear the pairing connection between the headphone and other Bluetooth devices.
Note: It is not recommended to replace the battery. Headphone should not
be placed in a baking or similar overheated environment.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
Product Overview
- Headphone
- USB charging cable
Key Description
- “- ” key: Volume down/ Previous track/Bluetooth mode and TF card mode switch
- “+” key: On/Off/Volume up/ Next track/Pause…
- LED indicator
- Microphone
- Charging contact
Power Supply/charging
For a better experience, fully charge your headphones before use. Use the USB
cable in the package to connect to the USB port on your computer or any other
standard USB-compatible charging device. Use a 5V/1A or above adapter (not
included) for charging.
Note : Only use computer USB output or standard 5-volt power adapter for
charging. Damage may occur if a non-standard power adapter is used for
charging, it may cause damage. Do not charge if the connector or device if it
is wet or damaged.
Power On/Off
Power On: In power off mode, press and hold the + key for 3 seconds to power on the headphone, and the blue light will go on, you will hear the power on tone. Power Off: To power off the headphone, press and hold the+ key for 5 seconds, and the indicator turns off, you hear a shutdown tone. Note: If no Bluetooth device is connected, the headphone will automatically shut down after 5 minutes.
Pairing
After the headphone is turned on, it automatically enters the mode to be
connected, and the red/ blue light flashes alternately. enable the Bluetooth
function of the phone and search for “ZC07” to connect. After the connection
is successful, you will
hear the prompt tone and the blue light will flash every 10 seconds.
Volume Control
When playing music, press the “+” key to increase the volume and press the “-”
key to decrease the volume.
Note : When the volume is increased to the maximum or decreased to the
minimum, a “beep” sound will appear.
Music
- Play/Pause: When playing music, double-click “+” to pause the play, and press any key again to continue the play.
- Next song: Press and hold the “+” key for 2 seconds to go to the next song.
- Previous song: Press and hold the “-” key for 2 seconds to switch to the previous song.
Call
- Answer an incoming call: Short press the”+” key to answer the call.
- Reject an incoming call: Press and hold the*+ ” key for 2 seconds to reject an incoming call.
- Hang up: Press and hold the “+” key for 2 seconds to end the call.
Reset Bluetooth pairing
When the headphone is powered on, press and hold the “+ / “- keys for 5 seconds at the same time to clear the pairing connection between the headphone and other Bluetooth devices.
LED Indicator & Prompt Tone
|
|
---|---|---
Power On| Blue LED light on| “Power on”
Power Off| Blue LED light off| “Power off”
Pairing| Blue/ red light flashes
alternately
| “Bluetooth Mode”
Bluetooth connected| Blue light flashes every 1 0
seconds
| “Connected”
Battery low| –| “Battery low”
Charging
| Red light is on during charging, light turns off when the battery is fully
charged
|
–
Cautions
It is not recommended to replace the battery. Headphones should not be placed
in a baking or similar overheated environment.
Warning : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>