anko 43109531 Trifold Mirror Instruction Manual

anko 43109531 Trifold Mirror

cleaning and maintenance

1.  Turn the appliance off before you start cleaning it.
2.  Do not immerse the appliance in water. Clean the appliance surface with a dry cloth or with a cloth moistened with water.
3.  Do not use any lubricant, detergent, polishing agents ,alcohol, steel wool,abrasive cleansers,chemicals or corrosive liquids on this appliance.

battery disposal

Eco-Friendly Tips This appliance has a lithium battery. Batteries contain substances harmful to our environment, please do not dispose the appliance with the normal household waste, instead, hand it over to an official recycling point.

 Trouble Shooting

Problem
LED Light is not bright enough or it does not tum on

Possible Cause
The battery is running low or is out of power

Solution
Charge the appliance as guided

safety instructions

To ensure the proper operation of this appliance, please read this instruction manual carefully before you use the appliance and save it for further reference.
WARNING

•  Check the appliance before you use it, do not use the appliance if it has any crack, gap or any other damage.

•  Make sure the mirror 1s not in a place or in a position where it can reflect sunlight. Reflected sunlight can cause fire.

•  Do not attempt to repair, disassemble, or modify the appliance by yourself to avoid accidents.
  CAUTION

•  Avoid touching the mirror with sharp objects in order to prevent scratches that might affect the mirror usage.

• This appliance has a lithium battery. Do not place or store the appliance for long periods of time in a hot or humid environment. If you do not intend to use the appliance for a long time, store the appliance after is fully charged.

specifications

Charging Voltage/Current: 5V /500mA
Type of Battery: Li-polymer 3.7V 1200mAH

product description (picture 1)

1. times magnified mirror
2. times magnified mirror
3. Normal mirror
4. Normal mirror
5. Touch switch
6. LED light
7. Holder
8. Charging port
9. Charging indicator
10. Main switch
11. USB cable

using the appliance

Charging the appliance takes about 4-5 hours, and it can be used continuously for up to 4 hours for the lightest model. The charging indicator will be red while the mirror is charging and will change to green, when fully charged. To use the LED light, touch the “touch switch”.

1.  Plug the small end of the USB cable into the port located in the backside of the mirror to charge
2.  Main Switch: ON-OFF
3.  Touch Button: ON- (long press to adjust the light brightness)-OFF
4.  This product has brightness memory function
5.  Holder can rotate 180 degree
6.  Charge only with supplied USB cable.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>