AcuRite 06074 Battery Pack Instruction Manual
- June 13, 2024
- Acurite
Table of Contents
AcuRite 06074 Battery Pack
INSTALLATION
- Remove the battery compartment cover from the bottom of the AcuRite AtlasTM outdoor device. Remove batteries if currently installed.
- Plug the battery pack cord into the battery compartment AcuRite AtlasTM
- Loop the cord through the slot, then replace the battery compartment cover.
- Remove the battery pack cover by pulling upward on the cover’s tabs (away from the battery pack).
- Insert 4 x AA alkaline or lithium* batteries into the battery compartment. Heavy-duty or rechargeable batteries are not recommended.
- Replace the battery pack cover.
- Mount the battery pack using the integrated hang holes. We recommend mounting on a pole or a flat surface such as a wall or post. The battery pack is water-resistant and is designed for general outdoor use.
- Use the included zip ties and hardware to secure excess cable near the battery pack, leaving enough slack for a “drip-loop,” preventing rainwater from trailing into the battery pack. Installation is complete.
Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries for temperatures below -4°F (-20°C).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>