MEAN WELL ODLV-45-12 45W PWM Output LED Driver Owner’s Manual
- June 13, 2024
- MEAN WELL
Table of Contents
45W PWM Output LED Driver
ODLV-45 series
User’s Manual
http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf
Features
- Constant Voltage PWM style output with frequency 1KHz
- Plastic housing with class Il design
- Built-in active PFC function
- No load power consumption<0.5W (Blank-Type)
- IP67 rating for indoor or outdoor installations
- Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
- 3 years warranty
Applications
- LED strip lighting
- Indoor LED lighting
- LED decorative lighting
- LED architecture lighting
Description
ODLV-45 series is a45W AC/DC LED driver featuring the constant voltage mode PWM style output design. ODLV-45 operates from 90~295VAC and offers models with different rated voltage ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -20°C ~+85C case temperature under free air convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLV-45is equipped with various function options, such as dimming methodologies, so as to provide the design flexibility for LED lighting system.
Model Encoding
| Type | Function | Note |
|---|---|---|
| Blank | 2 in 1 dimming (0~10VDC and 10V PWM) | ln Stock |
| A | 2 in 1 dimming and Auxiliary DC output | ln Stock |
SPECIFICATION
MODEL| ODLV-45 -12| ODLV-45 -24| ODLV-45 -36| ODLV-45
-48| ODLV-45 -60
---|---|---|---|---|---
OUTPUT| DC VOLTAGE| 12V| 24V| 36V| 48V| 60V
RATED CURRENT| 3.0A| 1.88A| 1.25A| 0.94A| 0.75A
RATED POWER| 36W| 45.12W| 45W| 45.12W| 45W
DIMMING RANGE| 0~100%
VOLTAGE TOLERANCE| ±10%
PWM FREQUENCY (Typ.)| 1KHz(±20%)
SETUP TIME Note.3| 500ms / 230VAC 1200ms/115VAC
AUXILIARY DC OUTPUT Note.4| Nominal 12V(deviation 11.4~12.6)@50mA
for A-Type only
INPUT| VOLTAGE RANGE Note.2| 90 ~ 295VAC
(Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)
| PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to
“POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION| THD< 20%(@load≧60%/115VAC,230VAC;
@load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section)
EFFICIENCY (Typ.)| 84%| 86%| 88%| 88%| 90%
AC CURRENT (Typ.)| 0.6A / 115VAC 0.4A / 230VAC 0.3A /
277VAC
INRUSH CURRENT(Typ.)| COLD START 30A(twidth=150μs measured at 50% Ipeak)
at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 32 units (circuit breaker of
type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
NO LOAD POWER CONSUMPTION| <0.5W for Blank-Type, <1.2W for A-Type
PROTECTION| SHORT CIRCUIT| Shut down O/P voltage, re-power on to
recovery
OVER CURRENT| 105 ~ 115%
Protection type : Hiccup mode, recovers automatically after fault condition is
removed
ENVIRONMENT| WORKING TEMP.| Tcase=-20 ~ +85℃ (Please refer to “
OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+85℃
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X,
Y, Z axes
SAFETY & **EMC| SAFETY STANDARDS| UL8750(type”HL”),CSA C22.2
NO.250.13-12;ENEC BS EN/EN61347-1 & BS EN/EN61347-2-13 independent, BS
EN/EN62384,GB19510.1,GB19510.14; BIS IS15885( for ODLV-45-12,24,48 only), EAC
TP TC 004,IP67 approved
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C
(@load≧60%) ; BS EN/EN61000-3-3,GB17743, GB17625.1,EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS
EN/EN61547, light industry level(surge immunity: Line-Line:1KV),EAC TP TC 020
OTHERS| MTBF| 388.02K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 1117728.5mm (LWH)
PACKING| 0.42Kg;24pcs/11Kg/ 0.72CUFT
NOTE**| 1. All parameters NOT specially mentioned are measured at 230VAC
input, rated current and 25℃ of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “Stack
CHARACTERlSTlC” sections for details.
3. Length of set up time is measured at cold first start. Turning ON/OFF the
driver may lead to increase of the set up time.
4. Aux. 12V will be damaged with short circuit; lt will not be available with
dimming off or output no load condition.
5. The driver is considered as a component that will be operated in
combination with final equipment. Since EMC performance will be affected by
the complete installation, the final equipment manufacturers must re-qualify
EMC Directive on the complete installation again.
6. The ambient temperature derating of 3.5℃/1000m with finless models and of
5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
7. For any application note and lpm water proof function installation
caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
8. To fulfill requirements of the latest ErP regulation for lighting
fixtures, this LED power supply can only be used behind a switch without
permanently connected to the mains.
※ Product Liability Disclaimer: For detailed information, please refer to
https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx)
DIMMING OPERATION
※ Dimming principle for PWM style output
- Dimming is achieved by varying the duty cycle of the output current.
※ 2in 1dimming function
© Applying additive 0~ 10VDC
Note :
- Min. duty cycle of output current is about 8% and the output current s not defined when 0%< Iout<8%.
- The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.
OUTPUT LOAD vs TEMPERATURE
STATIC CHARACTERISTIC
De-rating is needed under low input voltage.
De-rating is needed under low input voltage.
POWER FACTOR (PF) CHARACTERISTIC
Tcase at75C
TOTAL HARMONIC DISTORTION (THD)
60V Model, Tcase at 75°C
EFFICIENCY vs LOAD
ODLV-45 series possess superior working efficiency that up to 90% can be
reached in field applications. 60V Model, Tcase at 75
BLOCK DIAGRAM
DRIVING METHODS OF LED MODULE
MECHANICAL SPECIFICATION
INSTALLATION MANUAL
Please refer to :
http://www.meanwell.com/manual.htm|
File Name: ODLV-45-SPEC 2022-01-24