CARSON LF-10 LIGHTFLEX 1.5 Inches LED Task Lamp Instructions
- June 6, 2024
- Carson
Table of Contents
CARSON LF-10 LIGHTFLEX 1.5 Inches LED Task Lamp
Instructions for Use
- Attach task lamp to flat metal surface using built-in magnet located in magnifier base (Fig. 1).
- To use with table clamp, attach the clamp to the table and tighten securely (Fig 2). Attach task lamp to top portion of clamp using built-in magnet located in magnifier base (Fig. 3).
- Plugin the power adapter to the standard wall outlet and insert the plug into the power jack located on the left side of the magnifier base (Fig. 4).
- To use with battery power, remove the plug from the power jack. The unit will automatically switch to battery power.
- Position task lamp head as desired. Turn on the light using the switch located on the front of the task lamp base (Fig. 5).
To change batteries
- Remove the battery door and then remove the battery case from the compartment (Fig. 6-7).
- Replace exhausted batteries with 4 fresh AA 1.5V batteries according to polarity indicators printed inside the case.
- Place loaded battery case into the battery compartment with metal contacts facing upwards and towards the inside of the battery compartment (Fig. 8).
- Replace the battery door when finished.
Caution: Do not look at the LED light directly to avoid harming your eyes.
Read User Manual Online (PDF format)
Loading......