ACCURATE M1520M-AE Electric Mortise Locks Instructions
- June 13, 2024
- Accurate
Table of Contents
ACCURATE M1520M-AE Electric Mortise Locks
Product Information
The M9143ELR-AE is a mortise lock with Authorized Egress (AE) Monitoring, also known as Request to Exit or RX Switch. It is equipped with a SPDT Mechanical Switch.
Electrical Specifications
- Voltage: 125 VAC
- Current: 1 AMP
- Voltage: 30 VDC
- Current: 0.5 AMP
- Note: The product is mainly used as a dry contact monitoring switch.
For more information, visit the manufacturer’s website at
www.accuratelockandhardware.com.
Product Usage Instructions
To use the M9143ELR-AE mortise lock with Authorized Egress (AE) Monitoring, follow these steps:
- Ensure that the power source is compatible with the product’s electrical specifications.
- Refer to the provided wiring diagram for proper installation.
- Connect the appropriate wires to the designated terminals according to the wiring diagram.
- Make sure the product is securely mounted in the desired location.
- Test the functionality of the lock by activating the Authorized Egress (AE) Monitoring feature.
- If using as a dry contact monitoring switch, connect the product to the desired monitoring system or device.
- Refer to the user manual for additional information and troubleshooting tips.
For any further assistance or inquiries, please refer to the manufacturer’s contact information provided in the user manual.
INSTRUCTION
Mortise lock with Authorized Egress (AE) Monitoring, also referred to as Request to Exit or RX Switch.
AE – AUTHORIZED EGRESS
The AE switch monitors the use of the INSIDE trim when the OUTSIDE trim is
locked
ELECTRICAL SPECIFICATIONS
SPDT Mechanical Switch
VOLTAGE
- 125 VAC
- 30 VDC
CURRENT
- 1 AMP
- 0.5 AMP
NOTE: Mainly used as a dry contact monitoring switch
WIRING DIAGRAM
- YELLOW WIRE – Common
- RED WIRE – Normally Open
- GRAY WIRE – N ormally Closed
1 Annie Place Stamford, CT 06902 | 203.348.8865 | www.accuratelockandhardware.com