HTC PM-6102 Digital Manometer User Manual

: June 6, 2024
: HTC

Table of Contents

HTC PM-6102 Digital Manometer
Safety
Introduction
Error Warning
Specification
Meter Description
LCD display
Operation steps
Buttons function
Accessories
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

HTC PM-6102 Digital Manometer

Safety

Read the following safety information carefully before attempting to operate or service the meter.
Use the meter only as specified in this manual; otherwise, the protection provided by the meter may be impaired.

Environment conditions:

RH≤90％（Non-Condensation）
Operating Temperature-0～40℃

Maintenance and cleaning

Repairs or servicing not covered in this manual should only be performed by qualified personnel.
Wipe the unit with a dry soft cloth. Do not use solvents or detergents on this instrument.

Introduction

This product is aimed to measure different pressure values, here are some units for Choice: inH2O, psi ,bar, mbar , kPa, inHg, mmHg ,ozin2 ,,ftH2O, cmH2O ,kgcm2.equipped with simple Tube connection. It is widely used in measurement of ventilation and air conditioning system, clean room or any gas pressure system troubleshooting .Easy operation and clear reading.

Error Warning

When internal diagnostic test fails, an error message will appear on the LCD display.

error1： max pressure
error2： below min pressure

Specification

unit

| PM-6102| PM-6105| PM-6115
---|---|---|---
Range| Resolution| Range| Resolution| Range| Resolution
inH2O| ±55.40| 0.01| ±138| 0.1| ±415.2| 0.1
Psi| ±2.000| 0.001| ±5.000| 0.001| ±15.00| 0.01
Mbar| ±137.8| 0.1| ±344.7| 0.1| ±1034| 1
KPa| ±13.79| 0.01| ±34.47| 0.01| ±103.4| 0.1
inHg| ±0.407| 0.001| ±1.018| 0.001| ±30.54| 0.01
mmHg| ±103.4| 0.1| ±258.5| 0.1| ±775.7| 0.1
ozin²| ±32.00| 0..01| ±80| 1| ±240.0| 0.1
ftH2O| ±4.612| 0.001| ±11.53| 0.01| ±34.60| 0.01
cmH2O| ±140.6| 0.1| ±351.5| 0.1| ±1055| 1
kgcm²| ±0.140| 0.001| ±0.351| 0.001| ±1.055| 0.001
bar| ±0.137| 0.001| ±0.344| 0.001| ±1.034| 0.001
Maximum Pressure Psi| 10 Psi| 20 Psi| 100 Psi
Accuracy| ±0.3%FS
Linearity/Hysteresis| ±0.1%FS
Repeatability| ±0.25%FS
Pressure connector| 1/8〞（3.18mm）quick connector
Working temperature| 0～40℃/32～104℉
Storage temperature| -10～60℃/14～140℉
Over range indication| ERR1 or ERR2
Work current| 9V battery
unit| PM-6130| PM-6175
---|---|---
Range| Resolution| Resolution| Range
inH2O| ±830| 1| ±2078| 1
Psi| ±30.00| 0.01| ±75.00| 0.01
Mbar| ±2608| 1| ±5168| 1
KPa| ±206.8| 0.1| ±517.1| 0.1
inHg| ±61.08| 0.01| ±15.00| 0.01
mmHg| ±1551| 1| ±3878| 1
ozin²| ±480.0| 0.1| ±1200| 0.1
ftH2O| ±69.2| 0.01| ±173.0| 0.01
cmH2O| ±2109| 1| ±5272| 1
kgcm²| ±2.109| 0.001| ±5.250| 0.001
bar| ±2.068| 0.001| ±5.138| 0.001
Maximum Pressure Psi| 100Psi| 100Psi
accuracy| ±0.3%FS
Linearity/Hysteresis| ±0.1%FS
Repeatability| ±0.25%FS
Pressure connector| 1/8〞（3.18mm）quick connector
Working temperature| 0～40℃/32～104℉
Storage temperature| -10～60℃/14～140℉
Over range indication| ERR1 or ERR2
Work current| 9V battery

Meter Description

Air intake
LCD Display
Power key
Backlight key
Unit key
Hold button
record key

LCD display

Data record
Record mode
Max Min, Avg
Readings
Unit
Low battery indication
Memory time

HTC PM-6102 Digital Manometer fig 4

Operation steps

Open battery cover and install a 9-volt battery in the battery compartment. Press power key to start measuring
press UNITS key, choosing proper unit
connect Tube
read the testing values on LCD display
Note: when the meter is on, no gas pressure input, the meter will not necessarily be zero, you need to reset by yourself.

Buttons function

POWER BUTTON Key: it can turn on and turn off the meter, press POWER BUTTON , open manometer, the screen will display about 2 seconds, and then enter normal measurement model.
Key: after power on the meter, pressing this button can turn on and turn off the backlight.
Key: in measurement mode, press“ ”, it can review Max ,Min, Avg values. In this mode, other button functions are locked not operated. Press for three seconds, the meter exits record model.
UNIT: key: after power on the meter, press“ UNIT ”, it can convert the units of measurement：bar,mmHg,Ozin2,Kgcm2,psi,inH2O,Kpa,ft H2O,inHg,cmH2O,mbar.
key: After the meter power on, press“ ”button once, the screen will be locked, press“ ”again, it will cancel this function
After power on the meter, no gas pressure input, press“ ”for three seconds, LCD screen display“—-”，the meter reset.
Automatically power on/off； the meter will automatically turn off after approx. 25 minutes of inactivity. It can save battery’s life. If you do not want to turn off, first press ,then press POWER BUTTON ,”ON “will appear on the LCD display, it indicates that power off function is disabled.

Notes

Do not use it in high temperature and humidity。
Remove the battery when the meter is to be stored for long periods of time to avoid battery leakage.
Replace new batteries when the low battery icon appears.