HOFTRONIC 4406530 Wireless Wall Dimmer Push Button – 1 Zone User Manual
- June 3, 2024
- HOFTRONIC
Table of Contents
4406530 Wireless Wall Dimmer Push Button – 1 Zone
User Manual
IMPORTANT SAFETY DETAILS
- This device contains a button lithium battery that shall be stored and disposed properly
- Don’t expose the device to moisture
FUNCTION INTRODUCTION
PRODUCT DATA
| OUTPUT | RF signal |
|---|---|
| OPERATION FREQUENCY | 868/869.5/434MHz |
| POWER SUPPLY | 3V(1xCR2430 battery) |
| OPERATING TEMPERATURE | 0-40°C |
| RELATIVE HUMIDITY | 8% to 80% |
| DIMENSIONS | 86x86x14mm |
- Control 1 zone
- Single color controller
- Compatible with all universal series RF receivers
- 1 receiver can be paired by max 8 different remote controls.
- Waterproof grade: IP20
PAIR WITH RF RECEIVER
INSTALLATION
The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in numerous frames by different manufactures as below list:
| BEKER | S1, B1, B3, B7 glass |
|---|---|
| GIRA | Standard55, E2, Event, Esprit |
| JUNG | A500, Aplus |
| MERTEN | M-smart, M-Arc, M-Plan |
INTENDED USE/APPLICATION
Product designed for the use in households and for other similar general
applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. Product has a
protective contact/terminal. Failure to connect the protective lead may lead
to electric shock.
Mounting diagram: see pictures. Check for proper mechanical fastening and
connection to electrical power prior to first use. The product can be
connected to a supply network which meets energy quality standards as
prescribed by law. To maintain the proper IP protection level, the right
diameter of the power cable should be selected for the cable gland used in
the product.
FUNCTIONAL CHARACTERISTICS
The product can only be used indoors
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature. Product can only be supplied by rated
voltage or voltage within the range provided. It’s forbidden to use the
product with damaged protective cover. Product must not be used in
unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive
air atmosphere, fumes, or chemical fumes, etc. Nondemountable product.
Not suitable
for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralising. Products labelled in this way should
be returned to a collection facility for waste electrical and electronic
goods. Information on collection centres is provided by local authorities or
sellers of such goods. Used items can also be returned to the seller when new
product is purchased, in quantity no larger than the purchased item of the
same type. The above rules regard the EU area. In the case of other
countries, regulations in force in a given country must be applied. Contacting
the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
For more information about Hoftronic products visit www.hoftronic.com.
Hoftronic shall not be responsible for any damage resulting from the failure
to follow these instructions. Hoftronic reserves the right to make changes in
the manual – the current version can be downloaded at
www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union.
The product complies with all applicable regulations and rules in the country
of sale.
Formal documentation such as the declaration of conformity, the safety data
sheet and the product test report is available upon request.
CE DECLARATION
The product complies with the following
directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon
request.
Imported by
HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands
Made in P.R.C.
www.hoftronic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>