airlive 1000Base-LX MiniGBIC Transceiver User Guide

: June 7, 2024
: airlive

Table of Contents

Overview
Features
Application
Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

airlive 1000Base-LX MiniGBIC Transceiver User Guide

1.25G SFP transceiver
1310nm
Up to 20KM
Single Mode Dual Fiber
LC Duplex Connector
DDM Function
ESD Protection
Hot Pluggable
0°C~+70°C

Overview

The AirLive SFP-LX-1.25G-20KM is a low power, high performance and cost- effective single mode SFP Fiber transceiver for serial optical data communication applications up to 1.25Gbps and 20KM. The low jitter and high sensitivity module is intended for single mode dual fiber and operates at a nominal wavelength of 1310nm, the operating temperature 0°C~70°C and the module is hot pluggable.

The transceiver incorporates TX Disable control, TX-Fault, and RX_LOS monitor functions. It is a duplex LC connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE802.3z compliant link and Class I Laser safety compliant link.
The suitable applications are such as High-speed storage area networks, computer cluster cross-connect, customized high-speed data pipes, and more.

Features

1.25Gbps Fiber Mini GBIC SFP Transceiver
Single mode SFP fiber
Duplex LC connector Interface
Wavelength 1310nm FP Laser and PIN photo detector
1.25Gbps high speed
Distance up to 20KM
Low Power consumption Max 1.0W
Hot-pluggable capability
Very low EMI
Excellent ESD protection
EEE802.3Z
Operating Temperature：0 °C ~ +70 °C

Application

Fiber Channel Infrastructure
STM-16 Optical Interface
ATM Switches and Routers
SDH/SONET Switch Infrastructure

Application Environment examples

Bank
AirPort
Hotel
Expressway
Petrochemical Industry
Metro
Factory

Transmitter Operating Characteristic Optical, Electrical

Transmitter

Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| λC| 1260| 1310| 1360| nm
Spectral width (RMS)| Dl| –| –| 4| nm
Average Output Power| Po| -9| –| -3| dBm
Extinction Ratio| Er| 8| –| | dB
Rise/Fall Time (20%~80%)| Tr/Tf| | | 300| ps
Total jitter| Tj| | | 0.43| UI
Input Differential Impendence| Zin| 90| 100| 110| Ohm
Data Input Swing Differential| Vin| 500| | 2400| mV
TX Disable – Disable| | 2.0| | Vcc| V
TX Disable – Enable| | 0| | 0.8| V
TX Fault – Assert| | 2.0| | Vcc| V
TX Fault – De-Assert| | 0| | 0.8| V
Output Optical Eye| IEEE802.3z and ANSI Fibre Channel Compatible

Receiver Operating Characteristic Optical, Electrical

Receiver

Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| λC| 1260| | 1610| nm
Receiver Sensitivity| Rsen| –| –| -22| dBm
Receiver Overload| Rov| -3| | | dBm
Return Loss| | 12| | | dB
LOS Assert| LOSA| -36| | | dBm
LOS De-Assert| LOSD| | | -23| dBm
LOS Hysteresis| | 0.5| | 5|
Output differential impendence| Zout| –| 100| –| Ohm
Data Input Swing Differential| Vout| 370| –| 2000| mV
Rx_LOS – Assert| –| 2.0| –| Vcc| V
Rx_LOS – De-Assert| –| 0| –| 0.8| V

Fiber for Long Distance up to 20Km at Gigabi

Extend the network further with AirLive network switches and fiber modules. Use the SFP modules in the SFP ports which also supports DDM and offers more information about the fiber connection and makes it easier to find any faults or bad connections.

Specification

Model

Hardware

Power Supply Voltage:
3.15V~3.45V
Typical Power Supply Voltage: 3.3V
Standard
Compliant with IEEE 802.3Z
Compliant with Digital Diagnostic SFF-8472
Compliant with IEC-60825
DDM Support
ESD Protection
Total Supply Current:
300mA
Data Rate:
1.25 Gbps
Power Dissipation
Max 1.0 W
Transmitter (Electrical – Optical) Centre Wavelength:
- Min.:1260nm
- Typical: 1310nm
- Max.: 1360nm
  Average Output Power: -9, Max -3dBm
  Extinction Ratio: Min: 8dB
  Operating Data Rate: 1.25Gbps
  Tx Input Differential. Voltage:
- Min. 500 Mv
- Max. 2400 mV
  Tx Fault Output Voltage – Assert:
- Min. 2.0V
- Max. Vcc
  Tx Fault Output Voltage – De-Assert:
- Min. 0V
- Max. 0.8V
Receiver -Optical, Electrical
Center Wavelength:
- Min. 1260nm
- Max. 1620nm
  Receive Sensitivity In Average Power:
- Max. -22dBm
  Los Assert: -36dBm
  Los De-Assert: -23dBm
  Los Hysteresis
- Min. 0.5
- Max. 5
  Receiver Overload: -3dBm
  Data Input Swing Differential Voltage
- Min. 370mV
- Max. 2000mV