hansgrohe Citterio 39200000 Axor Einhebel Bidetarmatur Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- hansgrohe Citterio 39200000 Axor Einhebel Bidetarmatur
- Product Information
- Product Usage Instructions
- Models
- Safety Notes
- Installation Instructions
- Technical Data
- Assembly
- Dimensions
- Spare parts
- Operation
- Cleaning
- Test certificate
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe Citterio 39200000 Axor Einhebel Bidetarmatur
Product Information
The product is a shower system with various models including Citterio 39200000, Citterio 39020000, and Citterio 39010000/39015000 / 39014000 / 39018000. The product comes with safety instructions, installation and operation instructions, technical data, and spare parts information.
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries. The shower system may only be used for bathing, hygienic and body
cleansing purposes. The hot and cold supplies must be of equal pressure.
Technical Data
The product has a maximum operating pressure of 1 MPa and a recommended
operating pressure of 1.6 MPa. The hot water temperature should be set to the
recommended temperature. The product can be used together with hydraulically
and thermally controlled continuous flow heaters if the flow pressure is at
least 0.15 MPa.
Assembly
The product comes with installation instructions on pages 31 and 32. Gloves
should be worn during installation to prevent crushing and cutting injuries.
The installation kit does not come with the product and must be ordered
separately.
Product Usage Instructions
The shower system may only be used for bathing, hygienic, and body cleansing purposes. The hot and cold supplies must be of equal pressures. Follow the steps below to operate the product:
- Turn on the hot and cold water supplies.
- Adjust the temperature using the mixer to achieve the desired temperature.
- Use the showerhead to shower or cleanse the body.
Models
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic, and body cleansing purposes.
- The hot and cold supplies must be of equal pressure.
Installation Instructions
- The fitting must be installed, flushed, and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol Description
- Do not use silicone-containing acetic acid!
Assembly
Dimensions
Flow diagram
- with EcoSmart
- without EcoSmart
Citterio
39010000/39014000/39015000/39018000/39020000
Citterio
39200000
Spare parts
Special accessories
- special tool (58085000) order as an extra
- Installation kit order as an extra
Operation
open
close
cold
hot
Cleaning
The QuickClean cleaning function only needs a small manual rub-over to remove the limescale from the spray channels.
Test certificate
| P-IX | DVGW | SVGW | WRAS | KIWA | NF | ACS | ETA | |
|---|---|---|---|---|---|---|---|---|
| 39010000 | P-IX 9508/IA | X | X | X | X | |||
| 39014000 | X | X | ||||||
| 39015000 | P-IX 9508/IA | X | X | X | X | X | ||
| 39018000 | P-IX 9508/IA | X | X | X | X | X | ||
| 39020000 | P-IX 9508/IA | X | X | X | X | |||
| 39200000 | P-IX 9509/IA | X | X | X |
Hansgrohe
Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax
+49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com.