ADLER AD 4070 Black Multi Colour User Manual
- June 13, 2024
- ADLER
Table of Contents
ADLER AD 4070 Black Multi Colour
Product Information
- Product Name: AD 4070
- Model: BA
- Languages: English
- Applicable Voltage: 220-240 V, ~50Hz
Safety Conditions
- Read the instructions carefully before using the product.
- Use the product only indoors and for its intended purpose.
- Do not connect multiple devices to one power outlet for safety reasons.
- Use caution when using the product around children and do not let them play with it.
- The device may be used by children over 8 years old or persons with reduced capabilities under supervision.
- Always remove the plug from the power outlet gently after use and never pull the power cable.
- Never leave the product connected to the power source without supervision.
- Avoid exposing the product to water, direct sunlight, rain, or humid conditions.
- Periodically check the power cable condition and replace it if damaged.
- Do not use the product with a damaged power cable or if it does not work properly. Seek professional service.
- Avoid placing the product on or close to hot surfaces, kitchen appliances, or combustible materials.
- Do not let the cord hang over the edge of the counter.
- Do not immerse the motor unit in water.
- Always use both hands to carry or move the device and remove the cord from the plug before doing so.
Product Usage Instructions
Before First Use:
- Remove all stickers from the housing, cup, and cover of the blender.
- Wash the blender cup in warm water with washing-up liquid.
- Rinse the cup thoroughly.
- Dry the inside and outside of the cup before use.
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240 V, ~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to b e replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter.
- Do not immerse the motor unit in water.
- Always use both hands to carry or move the device. Always remove the cord from the plug prior to carrying or moving the device.
- Do not insert fingers or any other objects into blender’s cup when the blender is on.
- In order to avoid injuries handle the blades carefully.
- Watch out for long hair, scarves, neckties hanging above the cup and operating components of device.
- For safety reasons use only original accessories and spare parts intended for particular blender type, available at authorised service centre.
- Handle the blades with extreme care while disassembling accessories. The blades can cause cuts.
- Do not wash any blender parts in dishwashers.
- Change the accessories only when the device is switched off. Disconnect the device from the power.
- Do not put any products other than food and liquids in the blender cup. Do not put hot products in the cup.
- The device is not suitable for whipping egg whites, kneading dough or grinding meat. Don’t use aggressive detergents to clean the housing, as it may remove the informational graphic symbols such as: scale, signs, safety marks, etc.
- Do not start the empty mixing cup, without product inside.
- MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 3 MINUTES. After 3 minutes of continuous operation stop the device and wait couple of minutes before restarting.
DEVICE DESCRIPTION
- 1A – plug
- 1B – cover
- 1C – blender cup
- 1D – body
- 1E – speed adjustment knob
- 1G – base
- 1F – Pulse
DEVICE OPERATION
Before first use:
- Remove all stickers from the housing, cup and cover of the blender.
- Wash the blender cup in warm water with washing-up liquid, rinse thoroughly, dry the inside and outside of the cup.
Blender operation:
-
Put the blender main body (1D) on stable, level surface.
-
Make sure the speed adjustment knob (1E) is set to the Off position.
-
Place the blender cup (1C) on the body (1D).
-
Remove cover (1B) from the blender cup (1C), put in the ingredients to be mixed. In order to avoid overflow, the level of ingredients in the cup should not exceed ¾ of cup’s height.
-
Connect the power plug to the power outlet.
-
Turn the blender on by pressing Pulse button or by rotating speed adjustment knob (1E) to slower speed or faster speed.
NOTICE: During mixing always hold cup (1C) with hand. -
After the mixed products have proper consistence, turn the blender off by rotating speed adjustment knob (1E) to off position. Wait until the blades stop. Remove the power plug from the power outlet. Remove the cup.
NOTICE: Do not allow continuous operation of blender for longer than 3 minutes.
NOTICE: The pulsation operation mode, when the Pulse setting is switched, is used for a momentary mixing with maximum speed.
CLEANING AND MAINTENANCE
Make sure that the blender is disconnected from the power.
- Wash the cup, cover and blades in water with washing-up liquid. In order to wash the cup thoroughly put some water with washing-up liquid in the cup, connect the blender to the power, and operate it for a short period of time in pulse mode. Then pour out the water, rinse thoroughly and dry.
- Clean the stained body (1D) with moist cloth, and then wipe dry.
NOTICE: Don’t immerse blender body in water or other liquids.
NOTICE: Do not wash any blender parts in dishwashers.
TECHNICAL DATA
- Power: 600W max 800W
- Voltage: 220-240V~50Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
AFTER SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the
seller who issued the receipt directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>