Yaber K1 Projector User Manual

Yaber K1 Projector

YABER Lifetime Professional Support

Dear customer,

Thank you very much for supporting YABER!

Please read this manual thoroughly before using the projector. If you have any issues, email your order number and the problem to support@yabertech.com We will provide a fast solution in 24 hours.

Actually, many problems can be easily solved by setting, such as no signal, no sound, bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.

If you have any questions, could you please contact us so that the problem can been solved. And give us an opportunity to improve. We guarantee we will provide you a satisfactory solution.

Thanks for your understanding!
YABER Service Team

Tips

1. Do not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be 5℃~35℃ better.
2. If there are black spots on the projection screen, please don’t worry, please contact support@yabertech.com via email, we can send you a video about how to remove the dust.
3. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
4. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

Package List

• K1 Projector
  

• K1 Projector

• K1 Projector

• Remote Control

• Remote Control

• Cleaning cloth

• Lens Cover

• Quick Start Guide

• Warranty Card

Projector Specifications

Model No. K1

Native Resolution| 1920*1080P| Keystone Correction| Auto/Manual Vertical & Horizontal
Display Technology| LCD| Light Source| LED
Color Game| 55% NTSC| Aspect Ratio| 4:3/16:9
Recommended

Projection Distance

| 3.8-21.9ft| Minimum Projection

Distance

| 3.8ft
Power Voltage| AC100-240V| Projector Weight| 8.6lb
Picture File| JPG/JPEG/ BMP/PNG| Interfaces| HDMI2/USB2/3.5mm Headphone jack/AV
Projection Method| Front/Rear on Desk, Front/ Rear on Ceiling
Video File| MP4/MKV/WMV/3GP/MPG/VOB/TP/TS/DAT/MOV/FLV
Audio File| MP3/AAC/WAV/WMA/M4A/AAC/OGG/FLAC

Projector Overview

Down Key
Left Key
Right Key

Remote Control

twice in succession: select 16:9/4:3 projection
Auto focus/keystone| Adjust focus and keystone
Volume +| Volume up
Volume –| Volume down
Mute| Close the sound
Homepape| Enter the home page
Confirmation key| Confirm the option/Play or pause the video
Back| Enter the home page
F+| Focus +
F –| Focus –

Note:

1. Install 2 pieces of AAA batteries into the remote controller before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
3. If you are not using the remote controller for an extended period, please take out batteries to prevent batteries leakage.

Installation

Installation Method

The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with following methods:

Keep the projector at a height where its lens is axial symmetry to the screen. If this is not possible, use the keystone correction function to adjust the projection image.If you want to get a free projection screen,please contact us via support@yabertech.com.

Aspect Ratio: 16:9

Distance (ft.)

| Screen Size
3.8|

35″

5.5

| 50″
7.6|

70″

10.9

| 100″
13.1|

120″

16.4

| 150″
21.9|

200″

The recommended projection distance is about 10.9ft,the shortest projection distance is 3.8ft.
The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.

Install on the Ceiling

The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements.

In addition, the projector can be installed with following methods:

1. Please purchase an universal projector ceiling mount;
2. Remove the four rubber pads on the bottom of the projector, you will see the screw holes and use the M5*11mm screws for installing the ceiling, and then install it.

Starting Projector

1. Press the power key on the remote controller or projector, the indicator light will turn blue.
2. Use the focus function of the projector to get the best image performance.(If it is still blurry, please try to adjust the projection distance.)
3. Use the keystone function of the projector to get a rectangle projection screen.
4. Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal.
5. Select the ” ” menu,enter the [ Other Setting],then you can select the option [ Language Setting ] to set your preferred language.

Image Adjustment

When using the projector for the first time, it normally displays an unclear image. This is due to the lens being out of focus or the incorrect trapezoid setting.

Please follow the below steps to correct:

Focus Adjustment

When you start the projector,please wait patiently for 2-3 seconds the projector will adjust focus automatically.if the image is not clear,you can press the focus buttons “F+” , “F-” or auto focus keystone key on the remote controller to adjust the focus of the lens, tap or long press the focus button until the image is clear.

Note: If it is still blurry, please try to adjust the projection distance.

Keystone Correction

You can use the automatic keystone correction or digital 4D keystone correction of the projector to change the image to be rectangle(vertical and horizontal). Detail please refer the page 17 of this manual.

Setting Up The Projector

The projector’s setting page is as follow.

Select The Insert Signal Source

Select the [SOURCE] and choose HDMI1/HDMI2/AV on the setting page.

USB Disk Input Mode

Play Video/Image/Audio/Office in the USB Insert Mode

1. Insert the USB Disk, the [USB] icon will appear.
2. Select the [USB] on the setting page.
3. Select the option [ Video/Image/Audio/Office].
4. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ] button to play it.
   

PS:

1. The K1 upgraded projector supports U disk to directly play PPT, Word, Excel files.
2. If you enter from the [Video] menu, you can only play the video, The same as other 3 options.

Play Interface

Menu|

Function

---|---

| Select play mode (directory play/single cycle/directory loop)

| Switch to the previous video

| Fast Backward, rewinds the video back quickly while playing it. The rewinding speed ranges from 2X to 32X
| Play or pause the current video

| Fast Forward, pushes the video to move forward quickly while playing it. The forward speed ranges from 2X to 32X

| Switch to the next video
| Select all playlists in the current folder

| Playing settings
Playing settings| Include| Function
---|---|---
Video subtitle| close, inner, external| Set multiple modes of video subtitles
Breakpoint play| close, open| You can set the video continue to play from the point where it was misstopped
Audio track| Audio track| You can see the audio information
Display mode| 16:9,full,over,auto,4:3| You can set the video aspect ratio
Picture settings| Picture Mode, Color Temperature, Reset to Default| You can set the picture information
Sound settings| Sound Style, Equalizer Detail, Reset to Default| You can set the sound information
Menu| Content| Mode| Function
---|---|---|---
Picture Mode| User/Standard/Vivid/ Sport/Movie/Game| Brightness| Modify the picture parameters in the range 0-100
Energy Saving
Saturation
Sharpness
Sound Style| User/Standard/Vivid/ Sports/Movie/Music/ News| Balance| Modify the sound parameters in the range 0-100
Bass
Treble

Music Play Interface

| Switch to the previous video

| Fast Backward, rewinds the video back quickly while playing it. The rewinding speed ranges from 2X to 32X

| Play or pause the current video

| Fast Forward, pushes the video to move forward quickly while playing it. The forward speed ranges from 2X to 32X

| Switch to the next video

| Select all playlists in the current folder

| Playing settings

Picture Play Interface

| Switch to the previous picture
| Play or pause the current picture

| Switch to the next picture

| Zoom in image

| Zoom out image

| Flip picture 90°to the left

| Flip picture 90°to the right

| Set the picture information

WiFi Setting

Wireless Connection

Warming Tips:

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100mbps or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to email YABER via support@yabertech.com.

iOS Cast (for iOS Devices)

1. Go to “SETTING” page – Select the [SETTINGS] menu – Select the [WiFi Setting] menu – Open the WiFi function – Select your home WiFi from the list – Connect the K1 projector to your home WiFi.
   

2. Go to “APPS” page – Select “My Apps” row – Find [iOS Cast] App – Press the OK button to enter the [iOS Cast] menu.
   

3. Select the [ Settings ] menu on your iOS device — Turn on the [ Wi-Fi ] function — Connect your iOS device to the same home network as the projector.

4. Open the [ Control Center ] on your iOS device — Select the [ Screen Mirroring ] function — Select and connect the iOS Cast receiver named [K1-xxxx ] — your iOS device screen will be displayed on the projection screen after 3 seconds.

Miracast (for Android Devices)

1. Go to “APPS” page – Select “My Apps” row – Find [iOS Cast] App – Press the OK button to enter the [iOS Cast] menu.
   

2. Select the [ Settings ] menu on your Android device — Select the [ Screen mirroring ] function — Select your Miracast receiver named [K1-AnCast-XXXX ]– your Android device screen will be displayed on the projection screen after 3 seconds.
   

3. On your Android device, tap [ Settings ] -[ WLAN Display ] -Turn [ Wi-Fi ] ON, Connect your home WiFi.

Note:

1. Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone’s manual. [ Multiscreen/Wireless display/WLAN display/ Screen mirroring/Wireless projection/Smart view etc. ]
2. Not all Android phones support this function. Please make sure it is supported before use.

Bluetooth Setting

1. Go to “SETTING” page – Select the [SETTINGS] menu – Select the [Bluetooth] option — Open the Bluetooth function and your Bluetooth device — Scan the Bluetooth devices nearby automatically — Choose the Bluetooth device desired — it will be paired and connected automatically.
   

Note:

1. The K1 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.
2. If you have any question, please feel free to email YABER via: support@yabertech.com.

Projector Image Setting

Projection Mode

Automatic Keystone & 4-Point Keystone

1. Automatic Keystone Correction
   When you start the projector, please wait patiently for 2-3 seconds the projector will adjust keystone automatically. if the image is not rectangle, you can Use the digital 4D keystone correction to change the image to be rectangle.

2. Horizontal & Vertical Keystone Correction
   When the projection screen is not rectangular, it can be adjusted by 4-point keystone correction.

Step 1: Go to “SETTING” page – Select the [SETTINGS] menu – Select the [Projection Mode] option.
Step 2: Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters, until the projection screen becomes the desired rectangle

**OK Pick point :** press the OK button on the remote controller or projector to enter the adjustment interface.
**Adjustment :**Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters.
Back : Press the key on the remote controller to back to previous page.
☰ Reset : Press the key on the remote controller to restore the original parameters.

Digital Zoom

Step 1: Select the [ Digital Zoom ] option and press the OK button on the remote controller or projector to enter the submenu.

Step 2: By pressing the button on the remote controller or projector, you can reduce the height and width of projection size up to 50%.

System Update

Menu

|

Function

---|---
Online Update| Online update
Local Update| Local update
Restore Factory| Restore user operation application configuration and system setting

Other Setting

Menu

|

Function

---|---
Boot Source Option| Off/HDMI1/HDMI2/AV
Power On Option| Direct/Standby
Language Setting| Set up the language
Scheduled Shutdown| Off/10min/20min/30min/60min/120min

About the Direct/Standby Power On Option

Direct Mode: When the projector is powered on, the projector will be automatically turned on.

Standby Mode: When the projector is powered on, you need to press the button on the remote controller or projector to turn on the projector.

About

Menu

|

Content

---|---
System Version| V1.0.0.4:2022-XX-XX
MAC Address| e0:27:6c:46:b3:51

Signal Lines Connection

YABER K1 projector has 7 interfaces, HDMI ports2/ USB ports2/ 3.5mm headphone output/ AV in /RJ45 (Ethernet port) .Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)

Connect USB Disk

1. Insert the U disk into either of the two usb input ports.
2. You can directly enter the start-up screen on the home page, select the option [ Video/ Music/Photo/Office Suite].
3. Select the desired file (or enter the subfolder) in the USB disk, then press the [ OK ] button to play it.

Connect the Devices via the HDMI ports

1. Connect your TV stick or laptop to any HDMI port of the projector.
2. Enter the home page to select the corresponding HDMI1 or HDMI2 as the signal source.

Connect to the DVD Player

Use the 3-in -1 AV cable in the package

1. Connect your TV stick or laptop to any HDMI port of the projector.
2. Connect the colorful female connectors to your DVD player’s RCA cable with the 3-in-1 AV cable in the package.
3. Connect the black connector to the AV port of the projector, enter the home page to select [ AV ] as the signal source.
   
   Or connect to the DVD Player with the HDMI cable in the package.
   

Connect to the Sound bar/Speaker

If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows, enter the home page to select [ AV ] as the signal source.

Safe Shutdown

1. Press the button on the projector or remote controller,then press OK key to power off the projector.
2. Unplug the power cord of the projector.
3. Cover the lens and store the projector in a cool and dry place.

Warranty

Thank you so much for your purchase and support! We provide 3-year warranty for K1 projector. If you have any questions, please feel free to contact us via:
purchased from Amazon: support@yabertech.com
purchased from others: aftersales@yabertch.com

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Declaration of Conformity

We (EU based importer is responsible for this declaration)

Prolinx GmbH
(Company name)

Brehmstr.56, 40239 Duesseldorf, Germany
(Company address)

declare under our sole responsibility that the product
Trade name: Yaber
Equipment: Entertainment Projector
Model No. : K1

to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive(2014/53/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:

EN 62368-1:2014+A11:2017
EN IEC 62311:2020
ETSI EN 301 489-1 V2.2.3(2019-11)
ETSI EN 301 489-17 V3.2.4(2020-09)
ETSI EN 301 489-3 V2.1.1(2019-03)
EN 55032:2015+A11:2020
EN 55035:2017 +A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
ETSI EN 300 328 V2.2.2(2019-07)
ETSI EN 301 893 V2.1.1(2017-05)
ETSI EN 300 440 V2.2.1(2018-07)
IEC62321-3-1:2013
IEC62321-4:2013
IEC62321-5:2013
IEC62321-6:2015
IEC62321-7-1:2015
IEC62321-7-2:2017
IEC62321-8:2017

Full Name: George.wang Position: Approbation Manager
Signature: Place/Date: Shenzhen, China/Mar.22-2022

Customers Support

Scan and download the PDF user manual

Where to Get More Help

Support@yabertech.com

aftersales@yabertch.com

www.yaberglobal.com

Yaber Entertainment Projector

Yaber Entertainment Projector

References

• Yaber Entertainment Projector

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>