Yaber Y30 TFT LCG Projector Instruction Manual

YABER Y30
Instruction manual

YABER Lifetime Professional Support

Dear Customer,

Woohoo! Your projector is already in your hands! Let’s get started!
Do you have any questions on how it works? Please read this manual thoroughly before using the projector.
Are you satisfied with your projector? If you have any issues, email your order number and description of your issue to: Send your email ASAP, as we want to fix your issues the first time you have them. service@yabertech.com.
Customers sometimes can experience some confusion when using the projector. Rather than trying to communicate directly with us, many buyers instead just leave a review on the product page. However, most negative reviews are caused by non-standardized use rather than a defect in the product itself.
Actually, many problems can be easily solved by setting, such as no signal, no sound, cannot connect with WiFi, etc. We promise all the projectors have been carefully checked andpackaged before shipping.
Therefore, if you have any questions, please contact us and give us an opportunity to improve. We guarantee that we will provide you a more satisfactory solution.
Thanks for your understanding!
Best regards,
CYBER TEAM

Product description

1. (AV) Audio input
2.  Audio output
3. VGA input connector
4. power supply
5. arrow keys
6. OK button
7. Menu button
8. source button
9. back button
10. HDMI 1 / HDMI 2 input button
11. USB1 / USB1 input button
12. remote control receivers
13. current consumption (10 – 240 V)
14. main switch
15. Rotating lens to adjust sharpness

Notes: Please refer to the actual projector, the photo is illustrative onl

1080P Full hd projector Y30

Imaging System: LCD| Power:110-240V-%-50/60HZ
Light source: LED| Resolution:1080P Full HD
Color: 16.7M full color| Interface Input: HDM2/VGA/AV/ USB2/AUDIO IN
Projecton distance: 1.5-5.5m| Output interface: audio out
Projecton size: 45″-200″| Projection size: 45″-200″
Aspect Ratio: 16:9/ 4:3| Projector wight:2.9kg

Remote controller

1. Power button: Switch the standby mode to use
2. Mute key: Turns the projector sound on or off
3. Flip key: turn the image upside down
4/5/6/7. Rewind key: Fast forward / backward / previous / next track
8. Play Pause Button: Play / Pause
9/10/11/12. arrows: Parameters of the menu mode used to fix the projector
13. OK button: OK
14. Menu Button: To call or exit the projector main menu
15. Signal selection key: To change the signal source
16. Exit function key: Exit
17/18. Volume keys: volume up / volume down

Replace the remote control battery

1. push to open the battery cover.
2. Remove both old batteries and install new ones (AA). Make sure that the polarity of the batteries (+/-) is correctly aligned.

Included

Thanks
Thank you very much for purchasing the YABER Y 30 projector.
Please read this instruction manual carefully before use. Also, please keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact YABER_Service@outlook.com.
We can provide after-sales service until satisfaction.

Observation
Part of the video in Netflix and the main video formats can not be exported externally due to copyright protection (HDCP protocol). But since Amazon Fire TV is HDCP  compatible, you can play Netflix and the first video via Amazon fire.

Important safeguards
These safety instructions are to ensure the long life of the projector and to prevent fires and shocks. Read them carefully and pay attention to all warnings.

Installazione

1. For best results, use the projector in a dark room.
2. Place the projector on a flat, level surface in a dry area away from dust and moisture.
3. Exposure to direct sunlight, smoke or steam may damage internal components.
4. Handle the projector carefully. Falling or shaking can damage internal components.
5. Do not place heavy objects on top of the projector.

Supply

1. The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC adapter. Ensure that the power supply meets this requirement before attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord from the outlet.

Cleaning

1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to scratch or damage the lens.

FAQ

1. At the time of switching on, the indicator light does not work
   ①. The power supply may not be well connected
   ②. Check the overheating protection system

2. Pressing the power button on the remote control does not turn on the projector
   ①. The remote control batteries are empty
   ②. The signal between the remote control and the IR sensor is obstructed
   ③. Strong direct light on the IR sensor?

3.  No image on the screen
   ①. Is the channel setting correct?
   ②. Is there an input signal?
   ③. Is the input cable inserted correctly or is it in the wrong position?
   ④. In PC mode the refresh rate is> 75KHz?

4. The image works but there is no sound
   ①. Are the input cables connected correctly?
   ②. Volume at minimum or silent
   ③. Check that the audio format of the video is in the supported list

5. Turns off automatically after being turned on for a while
   ①. Is there a barrier around the fan?
   ②. Small or large voltage fluctuations
   ③. Check the overheating protection system

6. I can not find devices connected with hard drives or flash drives
   ①. Re-insert the device
   ②. Check if the device is working

7. Unable to play video
   ①. Is the video format correct?
   ②. The file is corrupted?
   ③. The device is damaged

Connection device

1. Connecting a PC

1. Use the supplied VGA cable to connect the PC to the projector.
2. Turn on the projector and the computer.

• NOTE: You can also connect an HDMI cable, remember that VGA connections do not transmit audio, so the sound will be output from the computer. If you connect an  HDMI cable, the audio will be output to the projector.

2. Connecting a smartphone
Connect a phone with the Android system:
(Note: check if your Android phone supports the MHL function.) MHL-HDMI cable not included)

1. Connect the projector and the Android smartphone with the MHL-HD- MI cable.
2. Choose the signal source: “HDMI”

Connecting an iPhone:

1. Connect the projector and iPhone with Lightning to HDMI cable (not included)
2. Choose the signal source: “HDMI”

3. Connecting a DVD player

1. Use the supplied AV cable to connect the DVD player to the projector.
2. Turn on the projector and DVD player.
   If your player has an HDMI output, it is best to use it over the analog (AV) option. Audio output must be configured from the DVD player menu if external speakers are installed.

4. Connect the soundbar

1. Use the supplied AV cable to connect the soundbar to the projector.
2. Turn on the projector and the soundbar.

Adjust the tilt base

1. Press and hold the tilt button on the back of the projector.
2.  Lift the front edge of the projector to the desired height, turn the presser foot and release the button to lock the tilt base to the position it deems appropriate.

Please purchase the projector stands and some 10 mm M4 screws.

Open the 4 buttons on the back of the projector and use the M4 * 10mm screws to hang the projector on the stand.

Starting the projector

Turn on the projector by connecting the supplied power cord to the outlet, and then pressing the main power switch. The projector will go into standby mode and the power indicator will light red.
Only after pressing the “POWER” button on the projector or remote control will the power indicator turn green and the projector will become ready to use.

select the signal source:
Press the “S” button on the remote control or the projector and choose between: “AV”, “PC-RGB”, “HDMI 1”, “HDMI 2”, “USB”.
1. Adjust the image size to get the best image size by moving the projector back and forth, then use the focus ring to get the best focus.

Select the language menu
Language menu you have to select it when you turn on the projector for the first time, you will see the interface in English. You can select one of the menu languages: German, French, Italian, Spanish, Japanese and so on.

Please follow these steps:
1. Press the “M” button and find the “OPTION” interface, then find the “OSD Language English”.
2. Press the ENTER button to execute the selection.

Setting the main menu:

Press the “M” button on the projector or remote control, there are 4 menu options: “Picture”, “sound”, “time”, “option”

PICTURE MENU

displayed.
ZOOM| +1-50| Riduci dall’asse X.
ZOOM| +1-50| Ridimensiona dall’asse Y.
Noise Reduction Low| Off, Low, Middle, High, Default| Trapezoidal adjustment
Projective Mode| Front| Cast, rear projection
4D Keystone Correction| Vertical:-50-50, Horizon:-50-50| Keystone adjustment

Important function

<Innovative 4D Keystone Correction> there are two ways to correct the trapezoid: “vertical” and “horizontal”, you can directly use the remote control for trapezoidal correction.

1. vertical adjustment range: -50 ~ + 50. When the vertical coefficient is gradually increased upward, the top of the projected screen gradually becomes smaller; When the vertical coefficient is gradually lowered, the lower part of the projected screen gradually becomes smaller.
2. horizontal adjustment range: -50 ~ + 50, when the horizontal coefficient is gradually increased upward, the left side of the projected screen does not change, the right side of the screen gradually remains and the left side of the screen does not change; When the horizontal coefficient is gradually lowered, the left side of the screen is gradually reduced, the right side of the screen constant.

“Vertical”. Range: -50 ~ +50

If the projection image is tilted vertically, as shown in (1), press the “M” button on the remote control, select “Trapezoidal Adjustment”, then press the “OK” button and set the  vertical value to “+”, until to achieve the projection effect (2).

If the projection image is tilted vertically, as shown in (3), press the “M” button on the remote control, select “Keystone adjustment”, then press the “OK” button and set the  vertical value to “-“, until to achieve the projection effect (4).

“Horizon”. Range: -50 ~ +50

If the projection image is tilted horizontally, as shown in (5), press the “M” key on the remote control, select “Keystone adjustment”, then press the “OK” button and set the horizon value to “+” “, Reach the projection effect (6).

If the projection image is tilted horizontally, as shown in (7), press the “M” button on the remote control, select “Keystone adjustment”, press the “OK” button, and set the horizon value to “-“, Reach the projection effect (8).

< X_Zoom / Y_Zoom>
When playing back an image or video, if you want to change the size of the projected image or video, you can use the remote control to select the next option and adjust the projection size:

1. Click “X_ZOOM” to adjust the horizontal size of the projection.
2. Click “Y_ZOOM” to adjust the vertical of the projection.
   You can reduce the original height and width provided by the video source up to 50%.

Menu Sound

Lautstarkeanpassung
EQ| OFF, SRS TruSurround XT, Surround| Stereo setting
Sound Surround| 120Hz,500Hz,1.5KHz, 5KHz, 10KHz| Hz setting
Fonte sound| Normal, Line, Sound box| Setting the connection of external
devices.

Tips:
(Note: if you connect an external speaker for audio output, pay attention to the following instructions).
A: Normal: in this mode, all devices can output a sound
B: Sound box: in this mode, only the projector emits a sound
C: Line: in this mode, the projector will not emit any sound

Option Menu

Choose a language
Restore Factory Default| reset| Whether to update the software
Blending| Off, Low, Middle, High| Adjust the sound quality
HDMI CEC| HDMI CEC, HDMI ARC, Auto Standby, Device control, Device List| Adjust the transparency of the menu.
OSD Duration| Off, 5Sec, 10Sec, 15Sec| Via, 5 seconds, 10 seconds, 15 seconds, duration of the menu
Software Update(USB)| Update software| Update software
High Fan Speed (ON, OFF)| ON, OFF| Adjust sound quality

You can reduce noise by changing the fan speed

1. High fan speed OFF
2. High fan speed activated

Projector-to-wall distance projected screen size

Thank you very much for purchasing the YABER Y 30 projector.
Please read this instruction manual carefully before use. Also, please
keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact service@yabertech.com.
We can provide after-sales service until satisfaction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>