Yaber V12 Projector User Guide

Yaber V12 Projector

Package Contents

• Vl2 Projector
  
  

• HDMI Cable
  
  

• Power Cord
  
  

• Remote Control
  
  

• Projector Base
  
  

• **Cleaning Cloth

**

• **Lens Cover

**

• **Quick Start Guide

**

Product Overview

Remote Control

1. Power
2. Mute
3. NETFLIX
4. YouTube
5. Prime Video
6. Open BROWSER
7. Red/Green/Yellow/Blue keys
8. Menu
9. Source
10. Arrow keys
11. Confirmation key
12. Back
13. Homepape
14. Volume+
15. Volume-
16. Focus+
17. Focus-
18. Projection mode
19. Number
20. USB
21. Backspace

Base Installation

1. Turn the machine over, back side up
   

2. Match the holes of the base to the screw holes on the projector.
   

3. Tighten the screws in the accessory box.
   

4. Complete the installation.
   

Turn on Yaber Projector

Adjust the Angle and Definition

Image Adjustment

If the image is not clear. You can use the electric focus function, and press the focus buttons “F+” and “F-” on the remote control to adjust the focus of the lens, until the image is clear.
Note: If it is still blurry, please try moving projector to the best distance. The best projection distance is 2-3 meters.

Connect Devices

YaberV12 projector has 6 ports, Wired Network Port, USB port2 / HDMI port2 / Headphone Port. Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)

1. For other Devices
   If you are using other system devices, please scan the QR at the end of this QSG to get more information for screen mirroring. Or please feel free to contact us at service@yaber.com

2. Miracast (for Android Devices)
   To activate this function, your android device must support Multi- Screen/Wireless
   Display. The name of “Multi-Screen” may vary depending on various brands of Android
   devices.
   Step 1: Connect your Phone to WiFi
   Step 2 : Turn on the projector, and open “Screencast” APP on the projector
   Step 3 : Turn on the “Multi-Screen/Wireless Display” of your Android device.
   Step 4: Select “Yaber-Vl2 Projector/Smart Projector” from the search results to connect.
   Step 5 : Succeed
   
   

3. Connect the Devices via the HDMI port

4. Connect your TV stick or laptop to any HDMI port of the projector.

5. Enter the home page to select the corresponding HDMI as the signal source.

Bluetooth Settings

1. Open your Bluetooth device.
2. Go to home page – Select the menu – Select the [Bluetooth Setting]menu – Open the Bluetooth function – Select your Bluetooth device – Press the OK button to connect.

Note: The Vl2 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.

Scan and download the PDF user manual

Where to Get More Help

service@yaber.com aftersales@yaber.com www.yaber.com
@yaberofficial Yaber yaberprojector.us

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Warning

This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Statement: When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>