Yaber Pro U6 Projector Instruction Manual

Pro U6 PROJECTOR

YABER Lifetime Professional Support

Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have any issues, email your order number and the problem to aftersales@yabertch.com We will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can been solved.
And give us an opportunity to improve. We guarantee we will provide you a satisfactory solution.
Thanks for your understanding!
YABER Service Team

Tips

1. Do not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be 5℃ ~35℃ better.
2. If there are black spots on the projection screen, please don’t worry,please contact aftersales@yabertch.com via email, we can send you a video about how to remove the dust.
3. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
4. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

Package List

Projector Specifications

Model No. Pro U6

Native Resolution| 1920*1080P| Keystone Correction| Manual Vertical& Horizontal
Display Technology| LCD| Light Source| LED
Color Game| 16.7M Full| Aspect Ratio| 4:3/16:9
Recommended Projection Distance| 4.5-16.0ft| Minimum Projection Distance| 4.5ft
Power Voltage| AC100-240V| Projector Weight| 8.6lb
Picture File| JPG/JPEG/ BMP/PNG| *** Interfaces| HDMI2/USB*2/3.5mm Headphone jack/AV/RJ45
Projection Method| Front/Rear on Desk, Front/ Rear on Ceiling
Video File| MP4/MKV/WMV/3GP/MPG/VOB/TP/TS/DAT/MOV/FLV
Audio File| MP3/AAC/WAV/WMA/M4A/AAC/OGG/FLAC

Projector Overview

filter
Detachable Dust Filter| Prevent the projector’s inside from the dust
Dust Cleaning Port| When black spots and dust appear on the screen, open the port to clean the dust
Rubber Pads| Protective pads/remove to install ceiling mount
Ethernet Port| Connect to the Ethernet

Down Key
Left Key
Right Key

Remote Contol

twice in succession: select 16:9/4:3 projection
Home Page| Enter the home page
Volume +| Volume up
Volume –| Volume down
Mute| Close the sound
Picture flip| Picture flips
Confirmation key| Confirm the option/Play or pause the video
Return| Return to the previous menu
Previous| Switch to the previous video
Next| Switch to the next video

Note:

1. Install 2 pieces of AAA batteries into the remote controller before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
3. If you are not using the remote controller for an extended period, please take out batteries to prevent batteries leakage.

Installation

1. Installation Method
The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements.
In addition, the projector can be installed with following methods:

1. Front projection Ceiling mount

2. Rear projection Ceiling mount

3. Front projection Desk mount

4. Rear projection Desk mount

Keep the projector at a height where its lens is axial symmetry to the screen. If this is not  possible, use the keystone correction function to adjust the projection image.If you want to get a free projection screen,please contact us via aftersales@yabertch.com.

Aspect Ratio: 16:9

Distance (ft.)| Screen Size
4.5| 40″
6.7| 60″
8.9| 80″
11.2| 100″
13.4| 120″
16.8| 150″

The recommended projection distance is about 11.2ft, the shortest projection distance is 4.5ft.
The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.
2. Install on the Ceiling
The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements.
In addition, the projector can be installed with following methods:

1. Please purchase an universal projector ceiling mount;
2. Remove the four rubber pads on the bottom of the projector, you will see the screw holes and use the M5*11mm screws for installing the ceiling, and then install it.

Starting Projector

1. Press the power key on the remote controller or projector, the indicator light will turn blue.
2.  Use the focus function of the projector to get the best image performance.(If it is still blurry, please try to adjust the projection distance.)
3. Use the keystone function of the projector to get a rectangle projection screen.
4. Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal.
5. Select the “ ” menu,enter the [ Common ], then you can select the option [ Language ] to set your preferred language.

Image Adjustment

When using the projector for the first time, it normally displays an unclear image. This is due to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:

1. Focus Adjustment
   
   Rotate the focus ring or lens slowly. At the same time, check the focus point carefully. The best focus point for the lens would be where the image most clear.
   Note: If it is still blurry, please try to adjust the projection distance.

2. Digital 4D Keystone Correction
   Use the digital 4D keystone correction of the projector to change the image to be rectangle(vertical and horizontal). Detail please refer the page 16 of this manual.

Setting Up The Projector

The projector’s home page is as follow.

1. Select The Insert Signal Source
   Select the desired insert signal source (HDMI1/HDMI2/AV) on the home -page.

2. USB Disk Input Mode
   2.1 Play Video/Audio/Image/Office in the USB Disk Input Mode
   1. Insert the USB Disk, Select the icon [Media] 2. Selec the option [All/Video/Audio/Image] 3. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ] button to play it.
   
   PS: 1.Pro U6 upgraded projector supports U disk to directly play PPT, Word, Excel files.
   2.If you enter from the [Video] menu, you can only play the video, The same as other 3 options.
   2.2 Play Interface
   ** Playing setting| Include| Function
   ---|---|---
   Play List| the videos of current folder| change video from the current folder
   Play mode| repeat all, auto exit, repeat one, random, play list| change play mode
   Aspect Ratio| auto, 16:9, 4:3, zoom1, zoom2| set video aspect ratio
   Audio Track| audio track| set audio track
   Subtitle Track| subtitle track| set subtitle track
   Encoding Standard| iso, windows| set encoding standard
   Region Language| various language| set region language
   External Subtitle| external subtitle| choose subtitle from other folders
   Progress Jump| progress jump| fast forward video to specific time
   Information| resolution, size, duration, bitrate| see the basic video information
   Picuture & Sound| piture and sound mode| set picture and sound mode
   Menu| Content| Mode| Function
   ---|---|---|---
   ** Picture Mode| Standard/Soft/ Dynamic/Vivid/User| Contrast|

Modify the picture parameters in the range 0-100

Brightness
Sharpness
Color
**** Sound Mode| Standard/Music/ Moive/News/Users| Bass| Modify the sound parameters in the range 0-100
Treble

2.3 Music Play Interface

change play mode
Information| size, duration, bitrate| see the basic music information
Picture&Sound| piture and sound mode| set picture and sound mode
Lyric Encode| various encoding standard| set encoding standard

2.4 Picture Play Interface

current folder
Play Slide| start, stop| start playing slides from the current folder
Interval Time| 3 sec, 5 sec, 8 sec, 12 sec| set interval time of playing slides
Aspect Ratio| auto, full screen, zoom out, original, zoom1, zoom2| set picture aspect ratio
Rotate| default, rotate right, rotate left| rotate picture
Set as wallpaper| Set as wallpaper| Set as wallpaper
Information| resolution, size| see the basic picture information
Picture&Sound| piture and sound mode| set picture and sound mode

WiFi Setting

Wireless Connection
Warming Tips:
1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommendedwhen using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to email YABER via aftersales@yabertch.com.

3.1 iOS Cast (for iOS Devices)

1. Go to home page – Press the left button – Select the [ Network ] menu – Select [ Wireless Net Mode ] – Select your home WiFi from the list – Connect the Pro U6 projector to your home WiFi
   

2. Select the [ Settings ] menu on your iOS device – Turn on the [ Wi -Fi ] function – Connect your iOS device to the same home network as the projector.

3.  Open the [ Control Center ] on your iOS device – Select the [ Screen Mirroring ] functionSelect and connect the iOS Cast receiver named [ Pro U6 -XXXX ] – your iOS device screen will be displayed on the projection screen after 3 seconds.

3.2 MaxhubShare (for Android Devices)

1. Make sure Pro U6 projector and your Android device are connected with the same Wi -Fi, operations refer to the [1] and [2] from iOS Cast (for iOS Device)

2. Go to home – Select the [ MaxhubShare ] app – Press the OK button to enter the [ MaxhubShare ] app.
   

3. Scan the QR code and download the app on your Android device

4. Open [MaxhubShare] app on your Android device – Select TV named [Pro U6 -XXXX] -Your Android device screen will be displaed on the projection screen after 3 seconds.
   ![Yaber Pro U6 Projector - MaxhubShare]](https://manuals.plus/wp- content/uploads/2024/03/Yaber-Pro-U6-Projector-MaxhubShare.png)

Note:

1. Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone’s manual. [ Multiscreen/Wireless display/WLAN display/ Screen mirroring/Wireless projection/Smart view etc. ]
2.  Not all Android phones support this function. Please make sure it is supported before use.

Bluetooth Setting

Go to home page – – Select the [ ] menu – – Select the [ Bluetooth ] Option – – Open the Bluetooth function and your Bluetooth device – – Scan the Bluetooth devices nearby automatically – – Choose the Bluetooth device desired – – it will be paired and connected automatically.

Note:

1. The Pro U6 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.
2. If you have any question, please feel free to email YABER via: aftersales@yabertech.com

Projector Image Setting

5.1 Projection Mode

5.2 Keystone Advanced & 4-Point Keystone
5.2.1 Vertical Keystone Correction
Step 1: Select the [ Sides ] option in the [ Advanced keystone correction ] menu, then press the ▼ button to enter the [ Four -sided trapezoid ] menu.

Step 2 : If the projection image shows as (1), press the button on the remote controller or projector to increase the vertical parameter ( -50~0), until to achieve the projection image (2).
Step 3 : If the projection image shows as (3), then press the button on the remote controller or projector, and decrease the vertical parameter (0~50), until to achieve the projection image (4).

5.2.2 Horizontal & Vertical Keystone Correction
When the projection screen is not rectangular, it can be adjusted by 4 -point keystone correction.
Step 1: Select the [ Corners ] option in the [ Advanced keystone correction ] menu;
Step 2: Press the button to select the [ Square Trapezoid ] menu, then press the [ OK ] bottom to enter the submenu.

Step 3 : Keep pressing the OK button on the remote control or projector to select the point .
Step 4: Press the arrow keys on the remote or projector to adjust the horizontal or vertical parameters, until the projection screen becomes the desired rectangle.

OK Pick point : Keep pressing the OK button on the remote control or projector, until the positioning icon appears at the point desired, then release the button immediately.
Adjustment : Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters.
Back : Press the key on the remote controller to back to previous page.
Reset : Press the key on the remote controller to restore the original parameters.

5.3 Digital Zoom

1. Open the [Custom Zoom] option.
2. Select [Zoom left and right] or [Zoom up and down].
3. Press the left or right button on the remote control.

System Update

Common

About the Standyby/on/last Power mode
Standby mode: When the projector is connected to the power, you need to press the button on the remote control to turn on the projector On mode: When the projector is connected to the power, the projector will automatically turn on
Last mode: Memorise the last power mode – either standby mode or on mode

Signal Lines Connection

YABER Pro U6 projector has 7 interfaces, HDMI ports2/ USB ports2/ 3.5mm headphone output/ AV in/ RJ45(Ethernet port). Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)

1. Connect the Devices via the HDMI ports
   1. Connect your TV stick or laptop to any HDMI port of the projector.
   2. Enter the home page to select the corresponding HDMI1 or HDMI2 as the signal source.

2. Connect to the DVD Player
   Use the 3 -in -1 AV cable in the package
   1. Connect your TV stick or laptop to any HDMI port of the projector.
   2. Connect the colorful female connectors to your DVD player’s RCA cable with the 3 -in -1 AV cable in the package.
   3. Connect the black connector to the AV port of the projector, enter the home page to select [ AV ] as the signal source.
   
   Or connect to the DVD Player with the HDMI cable in the package.
   

3. Connect to the Sound bar/Speaker
   If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows, enter the home page to select [ AV ] as the signal source.
   

Safe Shutdown

1. Press the button on the projector or remote controller,then press OK key to power off the projector.
2. Unplug the power cord of the projector.
3.  Cover the lens and store the projector in a cool and dry place.

Warranty

Thank you so much for your purchase and support! We provide 3 -year warranty for Pro U6 projector. If you have any questions, please feel free to contact us via
purchased from Amazon: support@yabertech.com
purchased from others: aftersales@yabertch.com

Declaration of Conformity

We (EU based importer is responsible for this declaration)
Prolinx GmbH
(Company name)
Brehmstr.56, 40239 Duesseldorf, Germany
(Company address)
declare under our sole responsibility that the product
Trade name: Yaber
Equipment: Entertainment Projector
Model No. : V5
to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive(2014/53/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:
EN 62368 -1:2014+A11:2017
EN IEC 62311:2020
ETSI EN 301 489 -1 V2.2.3(2019 -11)
ETSI EN 301 489 -17 V3.2.4(2020 -09)
ETSI EN 301 489 -3 V2.1.1(2019 -03)
EN 55032:2015+A11:2020
EN 55035:2017 +A11:2020
EN IEC 61000 -3 -2:2019
EN 61000 -3 -3:2013+A1:2019
ETSI EN 300 328 V2.2.2(2019 -07)
ETSI EN 301 893 V2.1.1(2017 -05)
ETSI EN 300 440 V2.2.1(2018 -07)
IEC62321 -3 -1:2013
IEC62321 -4:2013
IEC62321 -5:2013
IEC62321 -6:2015
IEC62321 -7 -1:2015
IEC62321 -7 -2:2017
IEC62321 -8:2017

Full Name: George.wang Position: Approbation Manager
Signature: Place/Date: Shenzhen,China/Mar.22 -2022

https://yaberglobal.com/

Scan and download the PDF user manual
Where to Get More Help

| Support@yabertech.com
---|---
| Aftersales@yabertch.com
| www.yaberglobal.com
| @Yaber Entertainment Projector
| @Yaber Entertainment Projector

References

• Yaber Entertainment Projector

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>