Yaber U2 Native 720P Entertainment LCD Projector User Manual

Yaber U2 Native 720P Entertainment LCD Projector

YABER Lifetime Professional Support

Dear Customer,
Woohoo! Your projector is already in your hands! Let’s get started!

Do you have any questions on how it works? Please read this manual thoroughly before using the projector. Are you satisfied with your projector? If you have any issues, email your order number and description of your issue to: [email protected] . Send your email ASAP, as we want to fix your issues the first time you have them.

Customers sometimes can experience some confusion when using the projector. Rather than trying to communicate directly with us, many buyers instead just leave a review on the product page. However, most negative reviews are caused by non-standardized use rather than a defect in the product itself. Actually, many problems can be easily solved by setting, such as no signal, no sound etc. We promise all the projectors have been carefully checked and packaged before shipping.

Therefore, if you have any questions, please contact us and give us an opportunity to improve. We guarantee that we will provide you more satisfactory solution.

Thanks for your understanding!
Best regards,
YABER TEAM

Product Packing List

• U2 Projector* 1
• 3-in-1 AV Cable* 1
• Support Base*1
• Projector Screen*1
• Power Cord* 1
• HDMI Cable* 1
• Remote Control * 1
• Instruction Manual* 1
• Lens Cleaning Cloth*1
  (Batteries not included)

Product Description

1. Focus Ring
2. Keystone Ring
3. Power
4. OK
5. Source
6. Left Move
7. Right Move
8. Return
9. Earphone Port
10. AV Port
11. USB-T
12. USB
13. HDMI
14. VGA
15. Power Cable Port

|

Name

|

Description

---|---|---

01

| Focus Ring| Adjust the focus ring to get the clearest image.

02

|

Keystone Correction

|

Adjust the keystone ring to get a rectangle shape.

03

| Power| This button can lead the projector to working / standby mode.
04| OK|

Confirm

05

| Source| Choose Source (AV, HD, VGA ,MEDIA, Screen)
06| Left Move|

Left Move

07

| Right Move| Right Move
08| Return|

Back

09

| Earphone Port| Earphone port
10| AV Port|

AV input

11

| USB-T| Wired screen mirroring port (With Original USB cable)
12| USB|

USB port

13

| HDMI| HDMI input
14| VGA|

VGA input

15

| Power Cable Port|

Plug the power cable

Pictures shown are for illustration purpose only. Actual product may vary  due to product enhancement.

Projector Specification

ceiling
Projector Weight| 2.2Ib| Focus| Manual Operation
Picture File| bmp./jpg/png/gif| Audio File| AAC /MP2 /MP3/
FLAC/WAV
Video File| **** MP4/MKV/MPG
Port| AV, USB , USB-T, HOM , VGA, 3.5mm Headphone Jack

Remote control

Replace the remote control battery

1. Push to open the battery cover.
2. Remove both old batteries and install new ones (AAA). Make sure that the polarity of the batteries(+/-) is correctly aligned.

Thanks

Thank you very much for purchasing the YABER U2 projector.
Please read this instruction manual carefully before use. Also, please keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact [email protected].
We can provide after-sales service until satisfaction.

Please Attention:
The Mirror display function doesn’t support protected videos due to copyright protection. (Netflix, Prime Video and Hulu etc.)

Important safeguards

These safety instructions are to ensure the long life of the projector and to prevent fires and shocks. Read them carefully and pay attention to all warnings.

Installation

1. For best results, use the projector in a dark room.
2. Place the projector on a flat, level surface in a dry area away from dust and moisture.
3. Exposure to direct sunlight, smoke or steam may damage internal components.
4. Handle the projector carefully. Falling or shaking can damage internal components.
5. Do not place heavy objects on top of the projector.

Adjust the Tilt Base and Hang Ceiling

Adjust the tilt base:
Install the screws (included in the package) to place① CD, lift the front edge of the projector to the desired height.

Hang ceiling:

Please purchase the projector stand and MS screw additionally.
Install the projector stand to place① CD, and hang the projector on the ceiling. ( Note: You can install the Tripod Stand to the place① CD )

2| Dusting mouth| Cleaning the dust through the
dusting mouth if has black spot
---|---|---

Supply

1. The projector is designed to operate with a 100-240 V – 50/60 Hz AC adapter. Ensure that the power supply meets this requirement before attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord  from the outlet.

Cleaning

1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to scratch or damage the lens.

FAQ

1. At the time of switching on, the indicative light does not work
   ①The power supply may not be well connected
   ②Check the overheating protection system

2. Pressing the power button on the remote control does not turn on the projector
   ①The remote control batteries are empty
   ②The signal between the remote control and the IR sensor is obstructed
   ③Strong direct light on the IR sensor?

3. No image on the screen
   ①Is the channel setting correct?
   ②Is there an input signal?
   ③Is the input cable inserted correctly or is it in the wrong position?
   ④In PC mode the refresh rate is> 75KHz?

4. The image works but there is no sound
   ①Are the input cables connected correctly?
   ②Volume at minimum or silent
   ③Check that the audio format of the video is in the supported list

5. Turns off automatically after being turned on for a while
   ①Is there a barrier around the fan?
   ②Small or large voltage fluctuations
   ③Check the overheating protection system

6. I can not find devices connected with hard drives or flash drives
   ①Re-insert the device
   ② Check if the device is working

7. Unable to play video
   ① Is the video format correct?
   ② The file is corrupted?
   ③ The device is damaged

STARTING PROJECTOR

Turn on the projector

1. lnstall two AAA batteries in the remote control before using.
2. Remove the lens cover of the projector.
3. Press the Power key on the remote controller or panel, the indicator light turn off from Red..
4. The lamp will start working,2 seconds later, when an image is projected on the screen, the machine is working smoothly. If the first projection screen is not the start up screen, press the “S” button on the remote controller and select Media source.
5. Adjust the keystone ring to get a rectangle shape.
6. Adjust the focus ring or rotate the lens of the projector to get the best image performance. (If it is still blurry, please try to adjust the projection distance.)
7. lf you connect other devices, be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal.
8. Press the Menu button on the remote control to enter [Setup] option – OSD Language to set your preferred language.

Turn off the projector

1. Press the Power button when the projector is in use, this will cause it to
   switch to standby mode.

2. When the projector switch into standby mode, the light will turn red.

Keystone and Focus

If the projected image is in a trapezoidal shape, it can be resolved by Keystone correction. ( Do Manual Keystone Correction )

Note: If the Keystone correction fail to resolve image shape, please reduce the vertical height of the projector in relation to the center of the screen.

The projected image may be blurry or difficult to see, this is due to lack of Focus adjustment with the lens, please follow the processes below to adjust the Focus. ( Do Manual Focus, find the most sharpness picture on the screen)

Note: It is normal when sharpness in the central, blur in the edge.

Setting the Main Menu:

The projector’s normal start up screen is as follows. If the first projection screen is not this one, press the ” ” button on the remote controller or “S” on the projector to select Media source.

Select the Input Source

When the “No Signal” prompt appears, you need to select the input
source:

1. Press the button on the remote control to select the desired signal, then press the OK button to conform the input source by the remote control.
2. Once the signal is detected, the selected source information will be displayed on the screen after a few seconds.

Screen Mirroring Methods

Warming Tips:

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 1 00Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to contact YABER via  [email protected].

At first, turn on the the projector, press the ” ” bottom on the remote controller, then it will shows “Source” option on the projection image. Choose the “Screen “, then press “OK” you will get this menu:

Wireless Projection Method

10S Cast(for 10S Devices)

Step 1
Select “IOS Cast” with left or right move button on the remote controller or projector. then press the OK button to enter the Network Setup – Select your home WIFI from the list – Connect the U2 projector to your home WIFI.

Step 2

Select the [Settings] menu on your IOS device – Turn on the [WIFI] function – Connect your IOS device to the same home network as the projector.

Step3

Open Control Center- Tap the Screen Mirroring button-Connect [RKcast-xxxxxx] ①Open control center.
②Tap on Screen Mirroring-Select the Device name [RKcast-xxxxxx]

For Android Users

Android Cast{for Android Devices)

Step 1
Select “Android Cast” with left or right move button on the remote controller or projector, then press the OK button to enter Android Cast.
Step2
Select the [ Settings ] menu on your Android device -Select the [ Screen mirroring ] function — Select your Miracast receiver named [ RKCast-XXXX ] – your Android device screen will be displayed on the projection screen after 3 seconds.

Step3
On your Android device, tap [ Settings ] -[ WLAN Display] -Turn [ Wi-Fi] ON, Connect your home WiFi.

Menu Setting Method

1.Press the” ” on the remote controller, then the menu picture will display on screen.
2.Press”◄/►”key, the menu will move to “Picture>Sound>Projection>Time> Setup”.
3.Select the adjust interface ,use”” key to choose the wanted item.
4.Press”OK” or “◄/►”to adjust the item parameter.
5.Press” “to quit the chosen menu after finishing adjusted, and then can choose other menu by pressing “◄ / ►”key.

PROJECTOR IMAGE SETTING

Picture Menu

PICTURE MENU

| MODE|

FUNCTION

---|---|---
Picture Mode| Standard, Mid, Personal Dynamic| Switch among the image mode
Brightness| 0-100| Switch among the image mode
Contrast| 0-100| Adjust the contrast parameter 0-100
Sharpness| 0-100| Adjust sharpness parameters 0-100
Saturation| 0-100| Adjust saturation parameters 0-100
Color Temp| Standard, Warm, Cool| Adjust color temperature
Aspect Ratio| Dotto Dot,4:3,16:9, Full,Zoom1,Zoom2| Ajust the video aspect ratio
Screen Mode| Auto, Video, VGA| Ajust screen mode
Advanced Settings| Strong, Medium, Weak, Off

contrast

| Adjust dynamic

Note: Only if you open the movie, the aspect ratio could be adjusted by PICTURE MENU. PICTURE MENU couldn’t change the parameter of   aspect ratio in other situation.

Sound Menu

SOUND MENU

|

MODE

|

FUNCTION

---|---|---
SOUND MODE| Personal, Standard, Music, Movie| Set up the sound mode
Treble| 0-50| Adjust the treble parameter 0-50
Bass| 0-50| Adjust the bass parameter 0-50
Balance| 0-50| Adjust the balance parameter -50-50
Surround Sound| On, Off| Set up the surround sound mode
AVL| On, Off| Set up the AVL(AUTO VOICE LEVEL) mode

Projection Menu

Projection MENU

|

MODE

|

FUNCTION

---|---|---
Network Information| WIFI List| Display WiFi access point
Network PercentZoom| 75%-100%| Reduce the screen size up to 25%
Network Mirror| Flip Mirror, Normal, Flip, Mirror| Set up the projection mode

< ZOOM Function>
When playing an image or video, if you want to reduce the size of the projected image or video, you can use the remote control to select the
ZOOM to adjust the projection size :
You can reduce the height and width of original size up to 25%.

Network Mirror (projection mode)

The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with following methods:

Time Menu

Time MENU

|

MODE

|

FUNCTION

---|---|---
OSDTime| Off, 5Sec, 15Sec, 30Sec| Adjust the duration of keeping the menu interface
Sleep Timer| Off/5min/15min/30min/60min, etc.| Shut off the projector after a set amount of time.
Auto Standby| Off/3 hours/4 hours/5 hours| Automatic sleep times

Setup Menu

Setup MEMU

|

MODE

|

FUNCTION

---|---|---
OS□ Language| English, France, Italian,

Spanish .etc.

| Setup different language
Version| | Display system version
USB Upgrade| | Upgrade the system version
Reset| | Reset the projector

To update the system

1. After decompressing the installation package, put it into the root directory of the U disk.
2. lnsert the USB flash drive into the USB port, do not insert it into the USB-T port.
3. Select the USB Upgrade function.
4. After the system upgrade is complete, you need to unplug the U disk, unplug the power cord to shut down, and boot to restart.

PROJECTOR CONNECTIONS

Connecting to the Computer

Using the HDMI or VGA cable to connect with projector.
(An HDMI connection is recommended for projecting movies, videos, and other files which need to be HD.)

1. Turn on your computer and the projector;

2. Connect the HDMI/VGA cable to your computer’s HDMI/VGA port;

3. Connect the other end to any available HDMI/VGA port on your projector;

4. Press the “Source” button to enter interface of Source;

5. Select HD / VGA source to project any files on your computer;

6. On your laptop, hold down the keyboard keys to change your  display mode: Computer only: is the default option – only displays on the main monitor.
   Duplicate : makes all of the monitors display the same thing duplicating the desktop on each monitor.
   Extend : makes all of your monitors act like one big monitor extending the desktop across all of them
   Projector only : Displays only on the secondary monitor like a projector

7. You can change your screen resolution:
   Choose Start–>Control Panel–>Appearance and Personalization –> Adjust Screen Resolution

Note: VGA connection can only transmit analog signal of video not audio. An external speaker is required when the device is connected via VGA cable.)

Connecting to the DVD player

1. Use the supplied AV cable to connect the DVD player to the projector.
2. Turn on the projector and DVD player.

If your player has an HDMI output, it is best to use it over the analog (AV) option. Audio output must be configured from the DVD player menu if external speakers are installed.

3-in-3 AV cable not included)

Connecting to the soundbar

1. Use the supplied AV cable to connect the soundbar to the projector.
2. Turn on the projector and the sound bar.

PROJECTION DISTANCE AND SIZE

Please follow the data in chart below, to adjust the image size and the distance. (Aspect Ratio: 16 : 9, Default)

The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.

Thank you very much for purchasing the YABER U2 projector. Please read this instruction manual carefully before use. Also, please keep it handy so you can check it at any time.

If you have any problem, please feel free to contact us
(Email: [email protected]), we will always try to offer you a   satisfactory solution.
FCC ID: 2A4K9-U2

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

WARRANTY AND SERVICE

We guarantee the unit TO BE free from defects in material or workmanship for a period of one (1) year from the date of purchase.
Should this unit be operated under conditions other than those recommended or at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, this will render WARRANTY VOID. The product you buy may sometimes differ slightly from illustration.

DISPOSAL:

Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

Declaration of Conformity

We (Manufacturer is responsible for this declaration)

YABER TECHNOLOGIES CO.,LIMITED. (Company n ame)

Room 406,4 Floor ,B Building ,BanTian International Center,HuanCheng
South Road, BanTian Street, LongGang  District.Shenzhen, China
(Company address)

declare under our sole responsibility that the product
Trade name: Yaber
Equipment: Entertainment Projector
Model No. : U2

to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to L VD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:

EN 62368-1 :2014+A11 :2017
EN IEC 62311 :2020
ETSI EN 301 489-1 V2.2.3(2019-11)
ETSI EN 301 489-17 V3.2.4(2020-09)
ETSI EN 301 489-3 V2.1.1 (2019-03)
EN 55032:2015+A 11 :2020
EN 55035:2017 +A 11 :2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
ETSI EN 300 328 V2.2.2(2019-07)
ETSI EN 301 893 V2.1.1(2017-05)
ETSI EN 300 440 V2.2.1 (2018-07)
IEC62321-3-1 :2013
IEC62321-4:2013
IEC62321-5:2013
IEC62321-6:2015
IEC62321-7-1 :2015
IEC62321-7-2:2017
IEC62321-8:2017

Full Name: George.wang
Signature: George.wang
Position: Approbation Manager Place/Date: Shenzhen, China/Mar.04-2022

Customer Service

www.yabertech.com
Yaber entertainment projector
[email protected]
@Yaber.official

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>