Yaber Buffalo Pro U7 Projector User Manual
- June 10, 2024
- YABER
Table of Contents
Buffalo Pro U7 Projector
Buffalo Pro U7 Projector
V.22.7.13
CONTENTS
Sauftpeprsoarlte@[email protected] EN
YABER Lifetime Professional Support 01
TIPS 01
PACKAGE LIST02
PROJECTOR SPECIFICATIONS 02
PROJECTOR OVERVIEW03
REMOTE CONTROL 05
INSTALLATION 06
1.Installation Method 06 2.Projection Distance and Size 07 3.Install on the
Ceiling 07
STARTING PROJECTOR 08
IMAGE ADJUSTMENT 08 1.Focus Adjustment 08 2.Digital 4D Keystone Correction 09
SETTING UP THE PROJECTOR09 1.Select The Input Signal Source 09 2.USB Disk
Insert Mode 10 3.WiFi Setting 13 3.1.iOS Cast(for iOS Devices) 14
3.2.Miracast(for Android Devices)15 4.Bluetooth Setting 16 5.Projector Image
Setting 16 5.1.Projection Mode 16 5.2.Keystone Advanced & 4-Point Keystone17
5.3.Digital Zoom 19 6.System Update 19 7.Other Setting 20 8.About 21
SIGNAL LINES CONNECTION 21 1.Connect USB Disk 21 2.Connect the Devices via the
HDMI ports 21 3.Connect to the DVD Player 21 4.Connect to the Soundbar/Speaker
21
SAFE SHUTDOWN 22
WARRANTY 22 TROUBLESHOOTING 23
Sauftpeprsoarlte@[email protected] EN
YABER Lifetime Professional Support
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have any
issues, email your order number and the problem to [email protected].
We will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no
sound, bluetooth connection failed, WiFi connection failed, dark spots, choppy
animation etc. We promise all the projectors have been 100% carefully checked
and packaged before shipping.
If you have any questions, could you please contact us so that the problem can
been solved. And give us an opportunity to improve. We guarantee we will
provide you a satisfactory solution.
Thanks for your understanding! YABER Service Team
TIPS:
1.Do not place projector in too warm or too cold room, because the high
temperature or low temperature will shorten lifespan of the device. The
working environment would be 5¥~35¥ better. 2.If there are black spots on the
projection screen, please don’t worry, please contact [email protected]
via email, we can send you a video about how to remove the dust. 3.The
ventilation is equipped for the projector to work stably. Don’t cover the vent
with cloth, blanket or other things. Don’t insert anything into the slit of
the projector, or it may produce a short circuit or an electric shock to your
device and cause damage. 4.The projector shall be strictly protected from
strong impact, extrusion and vibration. Do not try to move and on strong
impact, extrusion and vibration. Do not try to move and the internal circuit
faults. 5.Lens, as the core component of the projector, is directly related to
the picture definition and effect. The excessive dust thereon will affect
image quality. The dirty lens shall be wiped with soft cotton cloth for the
glass lens surface. Hard cloth or abrasives shall not be used.
01
PACKAGE LIST
Sauftpeprsoarlte@[email protected] EN
Buffalo Pro U7 Projector1 HDMI Cable1 Cleaning Kit*1
Remote Control1 3-in-1 AV Cable Quick Start Guide1
Power Cord1 Lens Cover1 Carry Bag*1
PROJECTOR SPECIFICATIONS
Native Resolution
Display Technology
Model No. BuffaloPro U7
1920*1080P
Keystone Correction
Manual Vertical & Horizontal
LCD
Light Source LED
Color Game 16.7M Full
Aspect Ratio 4:3/16:9
Recommended
Projection
4.0-22.3ft
Distance
Power Voltage
AC100-240V
Minimum Projection Distance
Projector Weight
4.0ft 4.8lb
Picture File
JPG/JPEG/ BMP/PNG
Interfaces
HDMI2/USB2/3.5mm Headphone jack/AV
Projection Method
Front/Rear on Desk, Front/ Rear on Ceiling
Video File 3GP/ AVI/ MP4/ MPG/ MKV/ VOB/ TS/ MOV/ TRP
Audio File MP3/ AAC/ FLAC/ OGG/ WAV/ WMA
02
PROJECTOR OVERVIEW
Sauftpeprsoarlte@[email protected] EN
8 9 10
12
3
11
4
5 67
12
13
14
15
16 17
18
03
Sauftpeprsoarlte@[email protected] EN
1/18 Height Adjustment Screw Adjust the height of the projector
2/5 IR Window
Infrared signal receiver
3 Projector lens 4 Power Cord Port 6 Headphone Jack 7/10 HDMI Ports 8 USB Ports
Optical coated glass lens Power Cord Port 3.5mm Headphone Output HDMI 1 input / HDMI 2 input USB 1 port / USB 2 port
9 AV Port 11 Speaker
Audio input Stereo 5W
12 Air Outlet
13 Focus Ring
14
Detachable Dust Filter Switch
Prevent the projector from overheating Adjust the focus ring to get the
clearest image
Push the switch to open the detachable dust filter
15
Detachable Dust Filter/ Air Inlet
16 Dust Cleaning Port 17 Rubber Pads
Prevent the projector’s inside from the dust/ Circulate inside and outside air
When black spots and dust appear on the screen, open the port to clean the
dust
Protective pads/remove to install ceiling mount
1
1. Power Key
2
2. Back
3. OK Key
3
4. Arrow Key
4
1
Power
2
Back
3
OK
4
Arrow Keys
Turn on/off the power
Return to the previous menu
Confirm the option Used to adjust the parameter of the projector in the menu
mode
04
REMOTE CONTOL
Sauftpeprsoarlte@[email protected] EN
1. Power 2. Source 3. Arrow keys 4. Menu 5. Homepape 6. Volume + 7. Volume 8. Mute 9. Picture flip 10. Confirmation key (Play and Pause) 11. Back 12. Previous 13. Next
1
Turn on/off the power
2
Select the input signal source
3
Used to adjust the parameter of the projector in the menu mode
4
Press once: Operate picture and sound settings in AV or HDMI Mode Press twice in succession: select 16:9/4:3 projection
5
Enter the home page
6
Volume up
7
Volume down
8
Close the sound
9
Picture flips
10
Confirm the option/Play or pause the video
11
Return to the previous menu
12
Switch to the previous video
13
Switch to the next video
05
Sauftpeprsoarlte@[email protected] EN
Note:
1).Install 2 pieces of AAA batteries into the remote controller before using
it. Do not combine new batteries with old ones in remote controller, which can
cause operation failure due to insufficient power supply. 2).When using the
remote controller, please make sure that the signal transmitter of the remote
controller aims at infrared signal receiver of the projector. 3).If you are
not using the remote controller for an extended period, please take out
batteries to prevent batteries leakage.
INSTALLATION
1.Installation Method The projector can be hanged on the ceiling with special
hanger frame, and placed on the stable desk to project the image according to
the operating environment and requirements. In addition, the projector can be
installed with following methods:
1.Front projection Ceiling mount 2.Rear projection Ceiling mount
3.Front projection Desk mount
4.Rear projection Desk mount
Keep the projector at a height where its lens is axial symmetry to the screen.
If this is not possible, use the keystone correction function to adjust the
projection image. If you want to get a free projection screen,please contact
us via [email protected]
06
Sauftpeprsoarlte@[email protected] EN
Aspect Ratio: 16:9
Distance (ft.)
Screen Size
4.0
35″
5.6
50″
7.7
70″
10.8
100″
13.1
120″
16.3
150″
22.3
200″
The recommended projection distance is about 10.8ft,the shortest projection distance is 4.0ft.
The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.
2.Install on the Ceiling
4DSFXIPMFT
A.Please purchase an universal projector ceiling mount; B.Remove the four
rubber pads on the bottom of the projector, you will see the screw holes and
use the M5*11mm screws for installing the ceiling, and then install it.
07
Sauftpeprsoarlte@[email protected] EN STARTING PROJECTOR
1)Press the power key on the remote controller or projector, the indicator
light will turn blue; 2)Adjust the focus ring of the projector to get the best
image performance; (If it is still blurry, please try to adjust the projection
distance.) 3)Use the keystone function of the projector to get a rectangle
projection screen; 4)Connect the external device (Smart phone, iPad, Fire TV,
TV box, DVD player, Computer, etc.) in the corresponding interfaces of the
projector, please be sure to select the corresponding source. If you do not
select the correct source, the projector will not be able to detect the
signal;. 5)Select the ” ” menu,enter the [ Other Setting],then you can select
the option [ Language Setting ] to set your preferred language.
IMAGE ADJUSTMENT
When using the projector for the first time, it normally displays an unclear
image. This is due to the lens being out of focus or the incorrect trapezoid
setting. Please follow the below steps to correct: 1.Focus Adjustment
Focus Ring
08
Sauftpeprsoarlte@[email protected] EN
Rotate the focus ring or lens slowly. At the same time, check the focus point
carefully. The best focus point for the lens would be where the image most
clear. Note: If it is still blurry, please try to adjust the projection
distance. 2.Digital 4D Keystone Correction. Use the digital 4D keystone
correction of the projector to change the image to be rectangle(vertical and
horizontal). Detail please refer the page 17 of this manual.
09
Sauftpeprsoarlte@[email protected] EN SETTING UP THE PROJECTOR
The projector’s home page is as follow.
1.Select The Insert Signal Source
Select the desired insert signal source (HDMI1/HDMI2/AV) on the home-page
2.USB Disk Input Mode
2.1.Play Movie/Music/Photo/Office Suite in the USB Disk Insert Mode 1).Insert
the USB Disk, the [USB] icon of the homepage will turn white. 2).Select the
option [ Movie/Music/Photo/Office Suite]. 3).Select the desired file (or
folder to enter the subfolder) in the USB disk, then press the [ OK ] button
to play it.
External Device
PS: a.Buffalo Pro U7 upgraded projector supports U disk to directly play PPT,
Word, Excel files. b.If you enter from the [Movie] menu, you can only play the
video, The same as other 3 options.
10
2.2.Play Interface
Sauftpeprsoarlte@[email protected] EN
Menu
Function
Select play mode (directory play/single cycle/directory loop)
Switch to the previous video Fast Backward,rewinds the video back quickly
while playing it. The rewinding speed ranges from 2X to 32X Play or pause the
current video Fast Forward, pushes the video to move forward quickly while
playing it. The forward speed ranges from 2X to 32X Switch to the next video
Select all playlists in the current folder
Playing settings
Playing settings Video subtitle
Include close,inner,external
Breakpoint play close,open
Audio track Display mode Picture settings Sound settings
Audio track
16:9,full,over,auto,4:3
Picture Mode, Color Temperature, Reset to Default Sound Style, Equalizer
Detail, Reset to Default
11
Function Set multiple modes of video subtitles You can set the video continue
to play from the point where it was stopped You can see the audio information
You can set the video aspect ratio
You can set the picture information
You can set the sound information
Sauftpeprsoarlte@[email protected] EN
Menu
Content
User/Standard/Vivid Picture Mode Sport/Movie/Game/
Energy Saving
Sound Style
User/Standard/Vivid/ Sports/Movie/Music/News
Mode Brightness Contrast Saturation Sharpness Balance
Bass
Treble
Function
Modify the picture parameters in the range 0-100
Modify the sound parameters in the range 0-100
2.3.Music Play Interface
Menu
Function Switch to the previous music. Play or pause the current music. Switch
to the next music. Repeat the music. Select the music list. Set the sound
information.
12
2.4.Picture Play Interface
Sauftpeprsoarlte@[email protected] EN
Menu
Function Switch to the previous picture. Pause the auto – play mode of a picture. Switch to the next picture. Flip picture 90°to the left. Flip picture 90°to the right. Set the picture information.
3.WiFi Setting
Wireless Connection
Warming Tips:
æThe fluency of screen mirroring with wireless connection will be affected by
the network environment. A bandwidth of 100Mbit or more is recommended when
using screen mirroring. çMake sure your mobile device is close to the
projector when using wireless connection. A distance within 1 meter is
recommended. èSome mobile devices may not support screen mirroring due to the
compatibility. éAny questions, please feel free to email YABER via
[email protected]
13
Sauftpeprsoarlte@[email protected] EN
3.1.iOS Cast (for iOS Devices)
1.Go to home page — Select the [ ] menu — Select the [ WiFi Setting ] menu —
Open the WiFi function — Select your home WiFi from the list — Connect the
Buffalo Pro U7 projector to your home WiFi.
2.Back to home page — Select [ iOS Cast ] menu — Press the OK button to enter the [ iOS Cast ] menu.
U7-iOSCast-xxxx
U7-iOSCast-xxxx
U7-iOSCast-xxxx
U7-iOSCast-xxxx
3.Select the [ Settings ] menu on your iOS device — Turn on the [ Wi-Fi ]
function — Connect your iOS device to the same home network as the projector.
4.Open the [ Control Center ] on your iOS device — Select the [ Screen
Mirroring ] function — Select and connect the iOS Cast receiver named [ U7
-iOSCast-xxxx ] — your iOS device screen will be displayed on the projection
screen after 3 seconds.
14
Sauftpeprsoarlte@[email protected] EN 3.2.Miracast (for Android
Devices)
1.Go to home page — Select the [ Miracast ] menu — Press the OK button to
enter the [ Miracast ] interface.
7
2.Select the [ Settings ] menu on your Android device — Select the [ Screen
mirroring ] function — Select your Miracast receiver named [ U7-AnCast-XX ] —
your Android device screen will be displayed on the projection screen after 3
seconds.
U7-AnCast-6688
U7-AnCast-6688
3.On your Android device, tap [ Settings ] -[ WLAN Display ] -Turn [ Wi-Fi ]
ON, Connect your home WiFi.
Note:
1.Different brands of Android phones have different operations for select
Screen Mirroring Display, please refer to your phone’s manual. [
Multiscreen/Wireless display/WLAN display/Screen mirroring/Wireless
projection/Smart view etc. ] 2.Not all Android phones support this function.
Please make sure it is supported before use.
15
Sauftpeprsoarlte@[email protected] EN 4.Bluetooth Setting
Go to home page — Select the [ ] menu — Select the [ Bluetooth Setting ]
Option — Open the Bluetooth function and your Bluetooth device — Scan the
Bluetooth devices nearby automatically — Choose the Bluetooth device desired —
it will be paired and connected automatically.
WIFI
Note:
1.The Buffalo Pro U7 projector is compatible with the Bluetooth headsets,
Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth
phones.2.If you have any question, please feel free to email YABER via:
[email protected]
5.Projector Image Setting 5.1.Projection Mode
16
Sauftpeprsoarlte@[email protected] EN
1.Front projection Ceiling mount
2.Rear projection Ceiling mount
3.Front projection Desk mount
4.Rear projection Desk mount
5.2.Keystone Advanced & 4-Point Keystone
5.2.1.Vertical Keystone Correction
Step 1: Select the [ Front ] option in the [ Keystone Advanced ] menu, then
press the button to enter the [ Manual Keystone ] menu.
Step 2: If the projection image shows as (1), press the button on the remote
controller or projector to increase the vertical parameter (-50~0), until to
achieve the projection image (2).
17
Sauftpeprsoarlte@[email protected] EN
Step 3: If the projection image shows as (3), then press the button on the
remote controller or projector, and decrease the vertical parameter (0~50),
until to achieve the projection image (4).
(1)
(2)
(3)
(4)
5.2.2.Horizontal & Vertical Keystone Correction
When the projection screen is not rectangular, it can be adjusted by 4-point
keystone correction. Step 1: Select the [ Side ] option in the [ Keystone
Advanced ] menu. Step 2: Press the button to select the [ 4-Point Keystone ]
menu, then press the [ OK ] bottom to enter the submenu.
You will get the best viewing experience when the green area is a perfect
circle.
Step 3: Keep pressing the OK button on the remote controller or projector to select the point . Step 4: Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters, until the projection screen becomes the desired rectangle.
18
Sauftpeprsoarlte@[email protected] EN
OK Pick point :Keep pressing the OK button on the remote controller or
projector, until the positioning icon
appears at the point desired, then
release the button immediately.
Adjustment :Press the arrow keys on the remote controller or projector to
adjust the horizontal or vertical parameters.
Back : Press the key on the remote controller to back to previous page.
Reset :Press the key on the remote controller to restore the original parameters.
5.3.Digital Zoom
Step 1: Select the [ Digital Zoom ] option and press the OK button on the
remote controller or projector to enter the submenu. Step 2: By pressing the
button on the remote controller or projector, you can reduce the height and
width of projection size up to 50%.
6.System Update
19
Menu Online Update Local Update Restore Factory
7.Other Setting
Sauftpeprsoarlte@[email protected] EN
Function Online update Local update Restore user operation application
configuration and system setting
Menu Boot Source Option
Function Off/HDMI1/HDMI2/AV
Power On Option
Direct/Standby
Language Setting
Set up the language
Scheduled Shutdown
Off/10min/20min/30min/60min/120min
About the Direct/Standby Power On Option
Direct Mode: When the projector is powered on, the projector will be automatically turned on.
Standby Mode: When the projector is powered on, you need to press the button on the remote controller or projector to turn on the projector.
20
8.About
Menu System Version MAC Address
Sauftpeprsoarlte@[email protected] EN
Content V1.0.0.2:2022-XX-XX Ac:5d:5c:c5:d9:83
SIGNAL LINES CONNECTION
Buffalo Pro U7 projector has 6 interfaces, HDMI ports2/ USB ports2/ 3.5mm
headphone output/ AV in. Please select the correct connecting port to connect
your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)
1.Connect USB Disk 1) Insert the U disk into either of the two usb input
ports; 2) You can directly enter the start-up screen on the home page, select
the option [ Movie/Music/Photo/Office Suite] 3) Select the desired file (or
enter the subfolder) in the USB disk, then press the [ OK ] button to play it.
2.Connect the Devices via the HDMI ports
- Connect your TV stick or laptop to any HDMI port of the projector; 2) Enter
the home page to select the corresponding HDMI1 or HDMI2 as the signal source.
21
3.Connect to the DVD Player
Sauftpeprsoarlte@[email protected] EN
Use the 3-in -1 AV cable in the package 1) Turn on your DVD player and the projector; 2) Connect the colorful female connectors to your DVD player’s RCA cable with the 3-in-1 AV cable in the package; 3) Connect the black connector to the AV port of the projector, enter the home page to select [ AV ] as the signal source.
AV port
Video Left Right
Or connect to the DVD Player with the HDMI cable in the package.
4.Connect to the Sound bar/Speaker
If your speaker has AUX port, please use your 3.5mm audio cable connect the
projector and your speaker as the picture shows, enter the home page to select
[ AV ] as the signal source.
-Audio out
AUX port
SAFE SHUTDOWN
1.Press the button on the projector or remote controller,then press OK key to
power off the projector. 2.Unplug the power cord of the projector. 3.Cover the
lens and store the projector in a cool and dry place.
WARRANTY
Thank you so much for your purchase and support! We provide 3-year warranty
for Buffalo Pro U7 projector. If you have any questions, please feel
free to contact us via [email protected].
22
TROUBLESHOOTING
Sauftpeprsoarlte@[email protected] EN
Problems listed below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do troubleshooting.
1. When turning on the power switch, the indicator light does not work. 1)
The power might not be connected well. 2) Check the over-heat protection
system.
2. The remote controller does not communicate with the projector. 1) The
power switch at the back of the projector is turned on or off? 2) The remote
controller’s batteries are depleted? 3) Something obstructing the signal
between the remote and IR 4) Strong light on IR directly.
3. No image on the screen. 1) Is the channel set-up correct? 2) Is there an
input signal ? 3) Is the input cable plugged well ? 4) Under PC mode, is the
refresh rate > 75KHz ?
4. Blue screen,no picture,no sound. Input cables connected right?
5.Picture right, no sound. 1)Input cables connected right? 2)Volume at min or
on Mute.
6.Can’t play the movies. 1)The format of the video is right? 2)Files are
broken? 3)Device is broken?
7. There is picture, no sound? The decode system doesn’t match.
8. Can’t find devices when connected with hard drive or flash drive. Check if
the device is broken.
9. Auto-off after working for a while. 1) The projector ventilation is
blocked. 2) The over-heat protection system.
FCC ID:2A4K9-PROU6
23
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) This device may not cause harmful
interference, and 2) This device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
WARRANTY AND SERVICE
We guarantee the unit TO BE free from defects in material or workmanship for a
period of one (1) year from the date of purchase.
Should this unit be operated under conditions other than those recommended or
at voltages other than the voltage indicated on the unit, or any attempts made
to service or modify the unit, this will render WARRANTY VOID. The product you
buy may sometimes differ slightly from illustration.
DISPOSAL: This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Declaration of Conformity
We (Manufacturer is responsible for this declaration) YABER TECHNOLOGIES
CO.,LIMITED. (Company name) Room 406,4 Floor,B Building,BanTian International
Center,HuanCheng South Road,BanTian Street, LongGang District,Shenzhen, China
(Company address) declare under our sole responsibility that the product Trade
name: Yaber Equipment: Entertainment Projector Model No. : Buffalo Pro U7 to
which this declaration relates is in conformity with the essential requirement
set out in the Council Directive on the Approximation of the laws of the
Member States relating to LVD Directive(2014/35/EU) & EMC
Directive(2014/30/EU) & RoHS(2011/65/EU) product is responsible to affix CE
marking, the following standards were applied: EN 62368-1:2014+A11:2017 EN IEC
62311:2020 ETSI EN 301 489-1 V2.2.3(2019-11) ETSI EN 301 489-17
V3.2.4(2020-09) ETSI EN 301 489-3 V2.1.1(2019-03) EN 55032:2015+A11:2020 EN
55035:2017 +A11:2020 EN IEC 61000-3-2:2019 EN 61000-3-3:2013+A1:2019 ETSI EN
300 328 V2.2.2(2019-07) ETSI EN 301 893 V2.1.1(2017-05) ETSI EN 300 440
V2.2.1(2018-07) IEC62321-3-1:2013 IEC62321-4:2013 IEC62321-5:2013
IEC62321-6:2015 IEC62321-7-1:2015 IEC62321-7-2:2017 IEC62321-8:2017 Full Name:
George.wang Position: Approbation Manager
Signature: George.wang Place/Date: Shenzhen,China/Mar.04-2022
www.yabertech.com [email protected] @Yaber Entertainment Projector @Yaber Entertainment Projector