ADLER AD 7050 Steam and Pressure Cleaners User Manual

ADLER AD 7050 Steam and Pressure Cleaners

Product Information

The AD 7050 is a versatile garment steamer that helps remove wrinkles and refresh clothes quickly and easily. It comes with a range of accessories, including a garment brush, fuzzy cloth, stander, rectangular brush, round brush, cup, cleaning disc, nozzle adapter, and pointy nozzle. The main unit features a power switch, handle, bottom, steam nozzle, and an indicated light that shows the heating and working status.

Technical Specifications

• Power supply: 220-240 V ~ 50/60 Hz
• Power: 1200 W

Product Usage Instructions

1. Before first use, remove all packaging materials and check for any possible damage on the product and its components.
2. Assembling Accessories:
   • Make sure the device is turned off and cooled down before any disassembly or maintenance.
   • Attach the chosen accessory by pushing its rear end onto the steam nozzle and locking it by turning it counterclockwise. Refer to Picture C for visual guidance.
   • The brush and nozzle can be slid onto the nozzle adapter. Refer to Picture D for visual guidance.
3. If the steam volume is reduced or stopped during use, refill the water tank by following points 2-4 from the “Using the Device” section of the manual.
4. Do not use the device when the water container is empty. It is recommended to avoid leaving unused water in the tank to prevent mold or lime scale build-up.
5. Use only distilled water to avoid lime scale clogging of the device and accessories. Do not add any additives or chemical materials to the water in the container.
6. After each use, allow the device to cool down and ensure that the accessories are completely dry before storing them in a dry location protected from frost and direct sunlight.
7. Before using the appliance on any surface or textile, always perform a test on a concealed area to ensure that the material is not sensitive to steam.
8. Dispose of carton boxes and plastic bags in the corresponding waste bins to protect the environment. Used appliances should be delivered to dedicated collecting points due to hazardous components.
9. Do not dispose of this appliance in the common waste bin.

SAFETY CONDITIONS

IMPORTANT INSTRUCTIONS ON SAFETY OF USE
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The appliacable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety , or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
7. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
8. Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
9. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to b e replaced in order to avoid hazardous situations.
10. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
11. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
12. Never use the product close to combustibles.
13. Do not let cord hang over edge of counter.
14. Never point the steam cleaner at yourself, other people, animals or electrical appliances, e.g. ovens.
15. You can use the device only with original accessories.
16. Do not block the openings on the machine, or insert any objects into the openings.
17. Before pouring water into the unit, disconnect it from the power supply.
18. Only clean water can be used in the device, do not add any substance: descaling, aromatic oils, cleaning agents.
19. Make sure that the water tank lid is tightly screwed to the device.
20. Warning. Hot surfaces.
21. Warning. Hot steam my cause burns.

MAIN SET INCLUDES (see Picture A)

1. Main unit
2. Garment brush
3. Cleaning disc
4. Fuzzy cloth
5. Stander
6. Nozzle adapter
7. Rectangular brush
8. Round brush
9. Pointy nozzle
10. Cup

PARTS LIST (see: Picture B）

1. Power switch
2. Handle
3. Water tank
4. Bottom
5. steam nozzle
6. Indicated light (red/green)
   • Red light: heating
   • Green light : working
7. Steam switch

Before first use:

Take out the product and the components, remove all packaging materials, and check for possible damage on any of them.

Assembling accessories:

NOTE: Before any disassembly or maintenance make sure, that the device is turned off and cooled down.
Step 1: Push the rear end of any chosen accessory onto the steam nozzle and lock it by turning it counterclockwise. (see Picture C）. Step 2: The all brush and nozzle can be slid onto the nozzle adaptor (see Picture D).

Using the device:

• Step 1: Place the device on a firm surface.

• Step 2: Take out the water container (B3) by sliding it backward and opening the small angular, silicon flap located on it.

• Step 3: Use the cup to fill water into the device.
  NOTE: When filling the water, pay attention to the marking (MAX). Fill a maximum of 120 ml of distilled water or tap water into the water container.

• Step 4: Close the water silicon flap. And install it into the main device by sliding it into place.

• Step 5: Plug the device into the power supply. Slide the power switch and the device will turn on. A red light will appear. Please wait until the light turns Green before proceeding further.

• Step 6: Exchange or insert any wanted accessory.

• Step 7: Once the light turns green you can start using the device. The device has 2 working modes:

1. Press and hold the Steam switch (B7). This will generate steam until you release the steam switch.
2. Single press the Steam switch (B7). This will generate steam until you press the Steam switch again or the water tank is empty. Step 8: Once you are finished using the device, release or unlock the steam switch. Press the power switch to turn the device off.

NOTES:
If the steam volume is reduced or stopped during use, water will probably have to be refilled. To do so please repeat points 2-4 from the Using the device part of the manual.

• Do not use the device with the water container is empty.
• It is suggested not to leave any unused water in the tank to avoid mold or lime scale build-up.
• It is highly recommended to use only distilled water to avoid lime scale clogging of the device and/or accessories.
• Do not add any additives like perfume, vinegar, starch, dirt-cleaning gel, cleaning gel, or other chemical materials to water in the container.
• Store the appliance in a dry location that is protected from frost and direct sunlight.
• Allow the device to cool down and accessories to completely dry before storing them.

USAGE – ACCESSORIES

NOTES:
Prior to using the appliance on any surface or textile, always make sure that material is not sensitive to steam by doing a test on a concealed area first before using it on a whole product/area.

• Do not direct the steam at glued laminated edges as the edge may loosen.
• Do not use the appliance for cleaning unsealed wood or parquet floors.
• Do not use the appliance for cleaning painted or plastic-coated surfaces such as the kitchen or living room furniture, doors, or parquet. To clean these surfaces, steam a cloth briefly and use it to wipe over the surfaces.
• Steam can damage sealed points of the window frame and, at low outside temperatures, lead to tension on the surface of window panes and hence to glass breakages. Do not direct the steam at sealed points on the window frame. At low outside temperatures, heat up the window panes by gently steaming the full surface of the glass. Clean the window area with a manual nozzle and cover. To remove the water, use a squeegee or wipe the surfaces dry.
• Plastic/metal brushes can scratch sensitive surfaces. They are not suitable for cleaning sensitive surfaces.
• Steam nozzle: The steam nozzle can be used for the following application areas without accessories:
  1. For removing slight creases from the hanging clothing items: Steam the clothing item from a distance of 10-20 cm.
  2. For wiping damp dust: Steam a cloth briefly and use it to wipe over furniture.
• Small plastic/metal round brushes: The round brushes are used for cleaning stubborn dirt that can be removed more easily that way.
• Attachment for textile and disinfection: It can be used for cleaning small areas that can be washed down, shower cubicles, and mirrors. Usually, the microfiber cloth/cleaning disc should be used with this accessory.
  • A2 – Garment brush – Used on clothes, for removing hair and straightening fabrics.
  • A3 – Cleaning disc – Can be used alone for ironing clothes.
  • A4 – Fuzzy cloth – Used with the Cleaning disk. Can be used to clean flat, hard surfaces.
  • A5 – Stand – Used for storing the device.
  • A6 – Nozzle adapter – Needed to use with other attachments.
  • A7 – Rectangular brush – For cleaning small surfaces.
  • A8 – Round brush – For cleaning small surfaces.
  • A9 – Pointy nozzle – For softening grime and removing dirt with more pressure.
  • A10 – Cup – For filling the water container.

CLEANING AND MAINTENANCE

NOTE: Before cleaning, please make sure the product has been turned off and unplugged from the power supply. Also, make sure that the product and components/accessories have cooled down.

• Step 1: After using the product, the remaining water in the water container must be poured from the device and left to air-dry, to avoid the lime creating inside of the water container.

• Step 2: Do not use hard or sharp objects to clean the product or other components to avoid damage.

• Step 3: Take the cloth and use a mild cleaning agent to thoroughly clean the cloth. Let it air-dry thoroughly before further use or storage. Step 5: Use a soft wet cloth to clean the machine body, the nozzle, and all other accessories. Then use a dry soft cloth to wipe dry the product.

• Step 4: Put the product and the accessories in a dry and cool place out of reach of children or animals.

• Step 5: If the product is not used for a prolonged period of time, you may disassemble the product.
  NOTES:

  • After the cooling of the product, hot steam will become water vapor after cooling. Some water vapor will accumulate in the steam nozzle and become water drops, which is a normal phenomenon – so make sure to let it dry completely.
  • Cleaning cloths can be machine washed at low temperatures ( Up to 30 C).
  • Do not put cleaning cloths into an electric dryer. Air-dry it.
  • The cleaning cloth is a consumable item. Please replace with new cleaning cloth when appropriate. Not doing so will affect the device’s efficiency.
  • If the cleaning cloth begins to unravel, please cut the loose threads carefully and do not pull on them.
  • If the product become blocked by limescale, mix one part of citric acid with three parts water. Pour this mixture into the water container and leave it for 6 hours. After that, turn the device ON over a non-citric acid/water-resistant surface.

TROUBLESHOOTING

If there is a problem with your product, check the following details before requesting service to your dealer.

• No steam

  • Check if the device is connected to the power supply.
  • Check if the power button and steam switch are in the ON position
  • Check the water level.

• Not working
  Check if the device’s power button is turned on and the cable is connected to the power supply.

• The product become blocked by limescale
  Mix one part of citric acid with three parts of water. Pour this mixture into the water container and leave it for 6 hours. After, turn the device ON over a non-citric acid/water resistant surface.

Technical Data

• Power Supply: 220-240V ~ 50/60 Hz
• Power: 1200 W
• Water container capacity: 120 ml
• Steam output rate: ~ 22 ml / min

DISPOSAL

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.

OTHER PRODUCTS

AFTER SALE SERVICE NOTICE

If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>