TREK 5298295 Ion Pro RT Front Bike Light User Manual

TREK 5298295 Ion Pro RT Front Bike Light

Product Information

• Product Name: Bontrager Lights Ion Pro RT, Ion 200 RT (headlights) and Flare RT (tail light)
• Model Numbers: 5298295 Ion Pro RT, 5298301 Ion 200 RT, 5298300 Flare RT
• Product Website: www.trekbikes.com
• Product Number: PN 273562

About this manual:
This manual provides instructions for using the Bontrager lights Ion Pro RT, Ion 200 RT (headlights), and Flare RT (tail light). The “RT” indicates that the lights are rechargeable and remote controllable when paired with the Bontrager Transmitr remote or another ANT+ compatible device. Please read the additional warnings on page 2 before using the lights. Note that these lights do not conform to the German road traffic regulation StVZO.

Specifications:

• 21700 lithium-ion battery
• Weight: 187g (6.6oz)
• Ingress range: IPX4

For more information:
If you need help not offered by this manual, please contact your Trek retailer or visit the trekbikes.com website.

Product Usage Instructions

Warnings:

• The front light is very bright. Do not stare at an operating front light, as it may be harmful to the eyes.
• The light may become hot and could cause burns or damage if it comes into contact with materials. Do not activate the light in an enclosed area and avoid accidental wireless activation.
• Do not use the light if the battery is impacted. Additionally, do not puncture, crush, deform, disassemble, or overheat the lithium-ion battery, as this may result in a fire, explosion, or contact with lithium or lithium dust.

Basic Operation (see Table 1):

To turn on the lights:

• Ion Pro RT: Double click (similar to a computer mouse) the power button.
• Ion 200 RT/Flare RT: Single click the power button.

To turn off the lights, press and hold the power button. To change modes, quick-press the power button.

Note:
When turned on, Ion Pro RT, Ion 200 RT, and Flare RT will return to the last active mode.

Table 1. Modes, runtimes, and battery lifeModel| Mode| Max Output (lumens)| Runtime (hours)| Power Button/Status LED Color
---|---|---|---|---
Ion Pro RT| High| 1300| 2| Green Steady
Medium| 800| 1.5| Red Steady
Low| 400| 3| Red Steady
Night Flash| 200| 6| Red Flashing
Day Flash| 300| 26| Red Steady
Ion 200 RT| High| 100| 1.5| Green Steady
Medium| 200| 3| Red Steady
Low| 300| 14.5| Red Steady
Night Flash| 5| 30| Red Flashing
Flare RT| Day Flash 1| 90| 12| Green Steady
All Day Flash 1| 45| 6| Red Steady
Night Flash| 5| 12| Red Flashing
Day Steady 1| 25| 15| Red Steady

Note:
The Ion Pro RT, Ion 200 RT, and Flare RT lights support auto brightness. The runtime values do not include the 30-minute low battery feature.

Battery Charging and Care (see Table 2):
Although the lights are charged at the factory, it is recommended to charge them before first use.

To charge the battery:

1. Open the USB port cover.
2. Plug the Micro charger cable into the USB port on the light.
3. Plug the cable into a computer or wall adapter.
4. When the charge is complete, unplug the Micro charger cable and close the USB port cover.

Important:
Ensure that the USB cover is latched before riding in rain or wet conditions. If the USB cover is not closed, damage to the light may occur.

including wet, cold, or extremely hot
environments.
Use a quality CE or UL approved USB charger rated for 500 mA or
greater.|

About this manual
This manual is for Bontrager lights Ion Pro RT, Ion 200 RT (headlights) and Flare RT (tail light). RT indicates light is rechargeable and remote controllable when paired with Bontrager Transmitr remote, or another ANT+ compatible device.

Please read the additional Warning, page 2, before using this light.

IMPORTANT:
Check your local lighting laws. Flashing lights and full brightness may not be allowed in all locations. These lights do not conform to the German road traffic regulation StVZO.

Specifications

• Battery charging and operating temperature: 32˚F (0˚C) to 104˚F (40˚C)
  • Reduced performance when operating below freezing.
• Ion Pro RT: 4900mAh, 3.63V, 17.78 Wh, 21700 lithium Ion battery
• Weight: 187g (6.6oz), ingress rating: IPX4
• Ion 200RT and Flare RT: 420mAh, 3.7 Vdc, 1.6 Wh lithium polymer battery
• Weight: 33g (1.2oz), ingress rating: IPX7

For more information
If you need help not offered by this manual, talk to your Trek retailer or visit trekbikes.com.

WARNING

• The front light is very bright. Do not stare at an operating front light. Staring may be harmful to the eyes.
• The light may be hot and could cause a burn or damage material it may contact. Do not activate (turn on) light in enclosed area. Avoid accidental wireless activation.
• Do not use if the battery is impacted. Also do not puncture, crush, deform, disassemble, or heat a lithium-ion battery above the permitted temperature. Inflicted damage to the battery may result in a fire, explosion, or coming in contact with specks of lithium or lithium dust.

Basic operation

• To turn on, double click (Ion Pro RT) (similar to a computer mouse) and single click (Ion 200 RT / Flare RT) the power button.
• To turn off, press and hold the power button. To change mode, quick-press the power button.

NOTE:
When turned on Ion Pro RT, Ion 200 RT and the Flare RT will return to the last active mode.

Table 1. Modes, runtimes, and battery life

Battery charging and care

Although the light is charged at the factory, it is recommended to charge it before first use.

To charge the battery

IMPORTANT:
For best results, charge at room temperature in a dry place. Use a quality CE or UL approved USB charger rated for 500 mA or greater. Avoid extreme conditions including wet, cold, or extremely hot.

1. Open the USB port cover.
2. Plug the Micro charger cable into the USB port on the light.
3. Plug the cable into a computer or wall adapter.
4. When the charge is complete, unplug the Micro charger cable and close the USB port cover.

IMPORTANT:
Ensure the USB cover is latched before riding in rain or in wet conditions. If the USB cover is not closed, damage to the light may occur.

Table 2. Battery charging and care

15

Yellow Flash 1| 25% – 75%
Green Flash 1| 75% – 99%
Green Steady 2| 100%
Ion 200 RT| Red Flash| 0% – 75%| 2
Green Flash| 75% – 99%
Green Steady 2| 99% – 100%
Flare RT| Red Flash| 0% – 75%| 2
Green Flash| 75% – 99%
Green Steady 2| 99% – 100%

1. Flashes fast (2 Hz) with 4 wire USB cable and a 500mA charger, or slow (1 Hz) with 2 wire USB cable
2. When fully charged, status led remains steady for 1 minute then turns off
3. Requires a 4 wire USB cable, supplied, and a 500mA charger

List of parts

You may have purchased one or more of the following lights.

| Ion Pro RT| Ion 200 RT| Flare RT
---|---|---|---
Light| | |
Mount|

25.4 – 35.0mm Adjustable Bar Mount with shim PN W552375

|

Front of bike

Quick Connect 0˚ Mounting Bracket

PN W527649

*Fits 22.2mm to 35mm bars.

|

Quick Connect 16˚ Bracket          for tail light PN W533846

Mounts to the seatpost or a rack.

Charging Cable|

Fast Charge Micro USB Cable

PN W559136, (4-wire)

| |
Accessories| Head Lights| Tail Lights
(purchase

separately)

|

Helmets (Blendr mount system)

|

22.2-31.8mm Adjustable

|

Rack attachment

| Circuit Model 34591          

Blaze Model 25359

| Bar Mount

PN W530421

| Use an 8mm M5 bolt and washer, PN 537061 with Quick
Connect 16˚ bracket supplied,
| | | or with complete rack mount
| | | kit, PN 552376
| | |

1

| | |
| Bontrager| 22.2-35.0mm Adjustable| | 3| | Seat Pack Clips
| Helmet Bracket| Sync Bracket| | | | Metal, PN 424905
| PN 428462| Model 418921| | | | Plastic, PN W528503
| | | | | 22.2

25.4

31.8

35.0

|
| | | | |

2

|
| |

| Speed Concept Attachment
| Take off the reflector mounting bracket,
| PN W327560 and replace the end with the Flare
| Round Mounting Kit interface, PN 418932

Caring for the battery

• Store the light at room temperature in a dry place. Avoid moisture, or extreme hot or cold.
• Store the light in the charged condition. Avoid ‘deep discharge’. Battery life will decrease if the battery is stored in a fully discharged condition.
• Over time, the run time of the battery will diminish. Expect about 500 full charges, depending on care. After a full life, the battery will continue to charge but with a lower run time. When the run time is unsatisfactory, do not open the case of the light or incinerate; please recycle.

Traveling with the battery
When traveling by air, verify with your carrier how lithium ion batteries of this capacity must be treated. Often these lights need to be packed in carry- on luggage.

Recycling
Please recycle the battery. In the US, you can find out where to do this at www.call2recycle.org.

This symbol on the product(s) and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, outside the US, please take this product(s) to designated collection points. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

Ion Pro RT information, installation, and special features

Installation

1. Loosen knob and open.

2. Adjust for bar size (31.8mm or 35mm).

3. Close and tighten knob.

4. Slide light onto mount until it locks in place.
   NOTE: Use provided shim to fit 25.4 bars.
   Removal

5. Press down.

6. Slide light to remove.

Low battery feature
When the battery charge drops below 5% the light automatically adjusts the output brightness to 50 lumens. This extends the light output for an additional 30 minutes.

Locking/Unlocking the mode

• Turn on and select the desired mode, then press and hold the power button 8 seconds to select it.
• The light will turn off and the main LED will flash once. To unlock, repeat the process.

Reset
To reset the light to factory default setings, with the light on, press and hold the power button for 15 seconds. The main LED will flash once at 8 seconds, and again at 15 seconds. Release the button after the second flash.

Wireless Communication

• The light is shipped with ANT+ and Bluetooth wireless connectivity enabled.
• To disable, with the light off, press and hold the power button for 15 seconds.
• The main LED will flash once at 8 seconds, and again at 15 seconds. Release the button after the second flash.

NOTE:
The status LED turns on blue for 3 seconds IF the wireless is enabled. After 3 seconds, the status LED continues to display the battery level. If the wireless is disabled, the status LED immediately displays the battery level.

• Pairing to the Transmitr Remote, Bontrager Garmin Edge ® GPS computer or select Garmin Edge ® computers
• The Transmitr Remote (or select Garmin Edge computers, sold separately) allows remote control of the light. This feature is only available on the Ion Pro RT, Ion 200 RT, and the Flare RT as well as other compatible Transmitr lights.
• For more complete instructions, refer to the Transmitr manual at trekbikes.com. For Garmin related instruction and a complete listing of compatible Edge devices visit support: garmin.com.
• Before starting, place the remote and all lights within a small area. Move 15 feet from other Transmitr / ANT+ compatible lights to prevent unintentional pairing. If a light is unintentionally paired, restart the pairing process at the beginning.

NOTE:
All pairings must be done in a single session. After pairing is finished, pairing any additional lights will require that you repeat the entire pairing procedure.

1. Place the light close to the Transmitr Remote (within 15cm/6in).

2. Quick-press the power button on the light to turn it on, then quick-press to turn it off again.
   NOTE: After completing this step, do not press the power button on the light again until pairing is complete.

3. Press-and-hold the center button on the Transmitr Remote for at least 8 seconds. When the corner buttons flash, release the center button.

4. While the remote searches for a light, its center button flashes red. When the Transmitr Remote finds a light, the center button on the remote will change from red to green, and the found light will flash.

5. While the found light is still flashing, quick-press the button on the Transmitr Remote to which you would like to pair the light. The selected button will glow, and the found (paired) light will stop flashing and turn off.
   NOTE: After the pairing, the center button on the remote will flash red until the Transmitr Remote finds another available light.

6. Repeat Step 4 and Step 5 for each additional light to be paired.

To exit pairing

1. When all lights are paired, quick-press the center button on the remote. The button will stop flashing and turn off.

To verify pairing

1. Quick-press the center button on the remote to turn on all paired lights.
2. Press-and-hold the center button to turn off all of them.
3. Turn on each light individually. Quick-press each paired corner button on the remote to turn on the individual light(s).
4. Press-and-hold the same corner button to turn off the light.

Using the Transmitr Remote

To turn on all lights

• ON: Quick-press the center button.
• OFF: Press and hold the center button.

To turn on an individual light

• ON: Quick-press the corner button that controls the light.
• OFF: Press and hold the same button.

To change modes of an individual light

• Each quick-press of a button that controls a light will cycle through the modes.
• To see battery power status on the remote
• When a corner button is pressed, the center button will show the battery status of the light.

Ion 200 RT information, installation, and special features

Installation
To attach with the Quick Connect 0˚ offset bracket

1. Place the quick connect on the handlebar with the hook in front.

2. Stretch the strap under the bar and connect to the hook.
   NOTE: Use the second hook to latch excess strap.

3. Slide the Ion 200 RT onto the bracket until it clicks. The power button should be facing up and the lens of the light should be perpendicular to the road.

Removal
Press down on the tab and slide the light away from the lever.

Alternatively, you can
remove the entire quick-connect bracket, with the light attached.

Low battery feature
When the battery charge drops below 5% the light automatically adjusts the output brightness to 5 lumens. This extends the light output for an additional 30 minutes.

Locking/Unlocking the mode
Turn on and select the desired mode, then press and hold the power button 8 seconds to select it. The light will turn off and the main LED will flash once. To unlock, repeat the process.

Auto brightness
The light is shipped with an ambient light sensor disabled. When the ambient light sensor is enabled, the light automatically changes modes with ambient light conditions. It changes from Day Flash to High Steady. To enable, press
and hold the power button 8 seconds. The light will flash once.

NOTE: When auto brightness is enabled, all modes are manually accessible.

Reset
To reset the light to factory default settings, with the light on, press and hold the power button for 15 seconds. The main LED will flash once at 8 seconds, and again at 15 seconds. Release the button after the second flash.

Wireless Communication

• The light is shipped with ANT+ and Bluetooth wireless connectivity enabled.
• To disable, with the light off, press and hold the power button for 15 seconds. The main LED will flash once at 8 seconds, and again at 15 seconds. Release the button after the second flash.

NOTE:
The status LED turns on blue for 3 seconds IF the wireless is enabled.

After 3 seconds, the status LED continues to display the battery level. If the wireless is disabled, the status LED immediately displays the battery level.

Flare RT information, installation, and special features

Installation
To attach with the Quick Connect 16˚ offset bracket

IMPORTANT:
The seatpost/saddle icon shows that the lens is oriented perpendicular to the ground to op?mize visibility.

NOTE:
Use the second hook to latch any excess strap.

To attach to a seat pack
Attach the seat pack clip to the bag loop. To optimize visibility, ensure the light lens is oriented perpendicular to the ground.

To attach to a rack
Remove the quick connect clip from the rubber strap and attach to a rack with a M5 bolt and washer, sold separately, PN 537061.

Low battery feature
When the battery charge drops below 5% the light automatically adjusts the output brightness and begins to flash. This extends the light output for an additional 30 minutes.

Locking/Unlocking the mode
Turn on and select the desired mode, then press and hold the power button 8 seconds to select it. The light will turn off and the main LED will flash once. To unlock, repeat the process.

Auto brightness
The light is shipped with an ambient light sensor disabled. When the ambient light sensor is enabled, the light automatically changes modes with ambient light conditions. It changes from Day Flash or All Day Flash to Night Flash,
OR Day Steady to Night Steady. To enable, press and hold the power button 8 seconds. The light will flash once.

NOTE:
When auto brightness is enabled, Day Flash, All Day Flash and Day Steady are manually accessible.

Reset
To reset the light to factory default settings, with the light on, press and hold the power button for 15 seconds. The main LED will flash once at 8 seconds, and again at 15 seconds. Release the button after the second flash.

Wireless Communication
The light is shipped with ANT+ and Bluetooth wireless connectivity enabled. To disable, with the light off, press and hold the power button for 15 seconds. The main LED will flash once at 8 seconds, and again at 15 seconds. Release the button after the second flash.

NOTE:
The status LED turns on blue for 3 seconds IF the wireless is enabled. After 3 seconds, the status LED continues to display the battery level. If the wireless is disabled, the status LED immediately displays the battery level.

WARNING
A bicycle without correct lights and reflectors might be difficult for other people to see, and you might not be able to see. If you cannot see, or other people cannot see you, you could have an accident. Make sure your lights operate correctly and that batteries are charged.

Compliance Information

FCC Compliance

• Ion Pro RT – FCC ID: 2AHXD5298295
• Ion 200 RT – FCC ID: 2AHXD553852
• Flare RT – FCCC ID: 2AHXD553852

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.

NOTES:
TREK BICYCLE CORPORATION IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY TREK BICYCLE CORPORATION OF THIS DEVICE COULD VOID THE USER’S AUTHORITY TO OPERATE THE DEVICE.

Industry Canada Compliance

• IIon Pro RT – (P/N 5298295 ) IC ID: 21334-5298295
• Ion 200 RT – (P/N 5298301 ) IC ID: 21334-553852
• Flare RT – (P/N 5298300 ) IC ID: 21334-553852

CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Trek lighting equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The radiated output power of the Ion Pro RT Wireless Device is below the Industry Canada (IC) radio frequency exposure limits, when used as directed in this manual (Note: attaching this light to a helmet changes the absorption characteristics of the light-body system). This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Status of the listing in the Industry Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca.

Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca.

European Union Compliance
Trek Bicycle Corporation hereby declare that the wireless device identified as ‘Ion Pro RT’, ‘Ion 200 RT’ and ‘Flare RT’ are in compliance with the following European Directives:

• • Radio Equipment Directive 2014/53/EU
  • EMC Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • RoHS Directive 2011/65/EU

The full text of the EU declaration of conformity is available from your dealer, or at the following internet address: http://www.trekbikes.com/support.

Ion Pro RT and Ion 200 RT do not comply with German StVZO regulations!

UK Compliance
Trek Bicycle Corporation hereby declare that the lighting devices identified as ‘Commuter PRO RT’ and ‘Flare RT’ are in compliance with the following UK legislation:

• The Electromagnetic Compatibility Regulations 2016
• Electrical Equipment (Safety) Regulations 2016
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
• The Radio Equipment Regulations 2017

Full text of the UK declaration of conformity is available from your dealer, or at the following internet address: www.trekbikes.com/coc- doc.

China Compliance

• Ion Pro RT – CMIIT ID: 2018DJ6875
• Ion 200 RT – CMIIT ID : 2018DJ5552
• Flare RT – CMIIT ID : 2018DJ5531

Contact information

North America

• Trek Bicycle Corporation 801 West Madison Street Waterloo, WI 53594 USA
• Tel: 800-313-8735

Europe

Bikeurope BV

• Ceintuurbaan 2-20C 3847 LG Harderwijk The Netherlands
• Tel: +31 (0)88 4500699

South Korea
5th floor, 312, Yeongdong-daero Gangnam-gu, Seoul Republic of Korea ZIP Code: 06177

Australia

• Trek Bicycle Corp. Au. 8 Townsville Street (Level One) Fyshwick (ACT) 2609 AU
• Tel: +61 (02) 61 732 400

United Kingdom

• Trek Bicycle Corporation Ltd. 9 Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8HX
• Tel: +44 1908 360 140

Japan
7-28 Oide-cho Nishinomiya-shi, Hyogo-ken Japan 662-0036

If you wish to see this manual in another language, please visit www.trekbikes.com/support and look for the Ion Pro RT/Ion 200 RT/Flare RT manual on the Manuals and user guides page.

www.trekbikes.com.

References

• Garmin International | Home
• Trek Bikes - The world's best bikes and cycling gear
• Call2Recycle | Leading the Charge For Battery Recycling
• Language selection - Innovation, Science and Economic Development Canada Main Site / Sélection de la langue - Site principal d'Innovation, Sciences et Développement économique Canada
• Trek Bikes - The world's best bikes and cycling gear
• Trek Bikes - The world's best bikes and cycling gear
• CoC-DoC
• Rider Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>