WARING BB300 Medium Duty Bar Blender Instruction Manual
- June 13, 2024
- WARING
Table of Contents
WARING BB300 Medium Duty Bar Blender
Product Information
The product is a Medium Duty Bar Blender with Toggle Switch & 48 oz.
Copolyester Container. It is model BB300 and is manufactured by Waring
Commercial Products.
The blender features a 48 oz. BPA Free Copolyester Container with Blending
Assembly. It has a function of blending and is designed for medium-duty use.
The unit is equipped with a toggle switch for easy operation. It has a power
board/control board and a 120 volt Chiaphua Motor. The product is NSF
certified and has a seal indicating that it meets the NSF standards.
The blender comes with various parts and accessories including a blade
assembly, V seal, bearing holder/seal assembly, washers, coupling, jar pad,
top housing, control panel, O ring, screws, cordset assembly, strain relief,
wire tie, bottom housing, foot, and power board/control board.
Product Usage Instructions
- Ensure that the blender is placed on a stable and level surface.
- Connect the power cord to a suitable power outlet.
- Place the desired ingredients into the 48 oz. BPA Free Copolyester Container.
- Securely place the lid on the container.
- Adjust the toggle switch to the desired setting (HI, OFF, or PULSE) based on your blending requirements.
- Press the toggle switch to start the blending process.
- Monitor the blending process and adjust the toggle switch asneeded.
- Once the blending is complete, turn off the toggle switch and unplug the power cord.
- Carefully remove the lid from the container.
- Pour the blended mixture into a serving container or glass.
- Clean the blender and its parts according to the cleaning instructions provided in the user manual
Note : Refer to the user manual for detailed instructions on assembling and disassembling the blender, as well as for troubleshooting tips and safety precautions.
Unit Information
- Limited 2 Year Warranty
- 1 HP – 60Hz – 6.8 Amps
- 2 Speed Motor with Pulse Function
Medium Duty Bar Blender with Toggle Switch & 48 oz. Copolyester Container
Description
1| 035153
026282-E
| Eastman Jar Cover Lid (on units after 3/30/2016)
Eastman Jar Cover Lid
---|---|---
2| 036319-V
033625-V
| Vinyl Jar Cover with Ribs (on units after 5/11/2018)
Vinyl Jar Cover
3| 503444| Blade Assembly
4| 027716| V Seal
5| 503458| Bearing Holder/Seal Assembly (changed after 4/23/2015)
6| 009724| Nylon Flat Washer
7| 003537| Stainless Steel Washer
8| 003509| Neoprene Washer (rubber)
9| 033626| 48 oz. BPA Free Copolyester Container
10| 003509| Neoprene Washer (rubber)
11| 003537| Stainless Steel Washer
12| 034156| Bearing Holder Nut
13| 003526| Phenolic Washer
14| 035048| Flat Stainless Steel Washer
15| 503520| Coupling (on units after 10/6/2017)
| 032453| Coupling
16| 033623| Jar Pad
17| 503520| Coupling (on units after 10/6/2017)
| 032453| Coupling
18| 035756| Stainless Steel Cap Washer ( on units after 8/14/2017)
| 026413| Stainless Steel Cap Washer
19| 033616| Top Housing
20| 026269| Upper Motor Mount
21| 037558| Control Panel (on units after 10/9/2020)
| 036242| Control Panel (OFF on center on units after 1/3/2019 )
| 033545| Control Panel (OFF on bottom)
| 035176| 120 volt Soft Start PCB (on units after 11/18/2015)
---|---|---
23| 033737| O Ring
24| Comes with the| 036242 (on units after 1/3/2019) – 033545
Control Panel
25| 026267| Screw (4 required)
26| 033618| 120 volt Chiaphua Motor
27| 032611| Screw (4 required)
28| 027278| Ground Screw
---|---|---
29| 002943| Washer
30| 503471| Cordset Assembly (on units after 2/3/2016)
| 035296| Cordset Assembly (use 503471 )
| 503431| Cordset Assembly
31| 033619| Strain Relief
32| 013731| Wire Tie
33| 035282| Bottom Housing ( on units after 2/3/2016 )
| 033617| Bottom Housing
34| 035287| Foot (4 required on units after (5/23/2016)
| 033620| Foot (4 required)
35| 035260| Screw (4 required on units after 2/3/2016 )
| 026276| Screw (4 required)