WARING WKS800 Knife Sharpener Instruction Manual
- June 13, 2024
- WARING
Table of Contents
WARING WKS800 Knife Sharpener
Product Information
| Catalog/Model | WKS800 |
|---|---|
| Date Code Location | YY MM DD or YYMMDD |
| Unit Information | Knife Sharpener |
| Unit Assembly | 503097 |
| Grinding Angle | 18-22 Degree Angle |
| Lubrication Requirement | No lubrication is needed or required for any moving |
parts
Blade Sharpening Technique| Use light downward pressure, always alternate
pulls in right
and left slots (with exception of specialized blades which only
need to be sharpened on one side)
Serrated Blades Sharpening| Sharpen serrated blades only in the strop/polish
station
Blade Insertion| Once blade is inserted, immediately begin to pull blade
towards
you
Product Usage Instructions
To use the WKS800 Knife Sharpener, follow these instructions:
- Place the knife sharpener on a stable surface.
- Insert the blade into the appropriate slot based on the type of blade you have:
- For regular blades, insert the blade into either the right or left slot.
- For specialized blades that only need to be sharpened on one side, insert the blade into the designated slot.
- For serrated blades, insert the blade into the strop/polish station.
- Apply light downward pressure on the blade.
- Always alternate pulls in right and left slots, except for specialized blades.
- If sharpening a serrated blade, move the blade back and forth in the strop/polish station.
- Once the blade is inserted, immediately begin to pull the blade towards you.
- Repeat the pulling motion until you achieve the desired sharpness.
- After sharpening, carefully remove the blade from the sharpener.
Note: Lubrication is not required for any moving parts of the knife sharpener.
If you have any further questions or need assistance, please contact us at 1-800-269-6640 or visit our website at www.waringcommercialproducts.com.
Unit Information
- 60 Hz – 32 Watts – 3.75 Amps
- Grinds at an Optimal 18-22 Degree Angle
- NO Lubrication Is Need or Required for Any Moving Parts
- Use Light Downward Pressure Always
- Alternate Pulls in Right and Left Slots (with exception of specialized blades which only need to be sharpened on one side)
- Sharpen Serrated Blades Only in the Strop/Poish Station Once Blade Is Inserted, Immediately Begin to Pull Blade Towards You
WARING COMMERCIAL
EAST WINDSOR, NJ 08520 KNIFE SHARPENER
MODEL / MODELE: WKS800
120V AC 60Hz 32W
MADE IN CHINA
CAUTION: DO NOT IMMERSE IN LIQUID
PRODUCT IDENTIFICATION
| Illustration # | Part # | Description |
|---|---|---|
| 1 | 503095 | Top Housing Assembly |
| 2 | 028287 | Screw (2 required) |
| 3 | 028288 | End Cap /polishing wheel side |
| 4 | 503081 | Polishing Wheel Assembly |
| 5 | 028289 | Screw (2 required) |
| 6 | 028290 | Washer (2 required) |
| 7 | 028291 | Washer (2 required) |
| 8 | 028292 | Gear Cover |
| 9 | 028293 | Screw (2 required) |
| 10 | 028294 | Motor Bracket |
| 11 | 028295 | Screw (2 required) |
| 12 | 028296 | Washer (2 required) |
| 13 | 028297 | Bushing Cover |
| 14 | 503082 | Grinding Wheels Assembly |
| 15 | 028298 | End Cap /grinding wheel side |
| 16 | 028287 | Screw (2 required) |
| 17 | 028494 | Shaving Drawer |
| 18 | 503096 | Bottom Unit Assembly with motor, cord & switch |
| 19 | 028299 | Screw (6 required) |
| 20 | 028300 | Suctiom Cup Foot (4 required) |
WARING COMMERCIAL
314 Ella T. Grasso Ave. Torrington, CT 06790
Tele. 1-800-269-6640
Fax 860-496-9017
www.waringcommercialproducts.com