VIVO STAND-TV07-S Black Stand for 13 to 50 Screens with Shelf Instruction Manual

: June 13, 2024
: Vivo

Table of Contents

VIVO STAND-TV07-S Black Stand for 13 to 50 Screens with Shelf
Product Information
Product Usage Instructions
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIVO STAND-TV07-S Black Stand for 13 to 50 Screens with Shelf

Product Information

Product Name: Black TV Stand with Storage Shelf
SKU: STAND-TV07-S
Manufacturer: Vivo
Website: https://vivo-us.com/products/stand-tv07-s

Contact Information:

Monday-Friday: 7:00 am-7:00 pm CST
Email: help@vivo-us.com
Website: https://vivo-us.com
Phone: 309-278-5303

Product Usage Instructions

Warning:
This product has a tip-over risk. Ensure proper assembly and use caution to prevent accidents.

Package Contents:

(x1) Base (A)
(x2) Feet (B)
(x1) Plastic Cover (G)
(x1) Shelf (H)
(x1) Center Pole (C)
(x1) Shelf Bracket (I)
(x1) VESA Plate (D)
(x2) VESA Adapter (E)
(x2) VESA Adapter (F)
(x8) M5x10mm Screw (S-A)
(x8) M5 Lock Nut (S-B)
(x5) M6x65mm Carriage Bolt (S-C)
(x5) M6 Washer (S-D)
(x5) M6 Lock Nut (S-E)
(x1) M6 Flange Nut (S-F)
(x4) M6x12mm Screw (S-G)
(x2) M6x60mm Socket Head Bolt (S-I)
(x4) M4x14mm Screw (M-A)
(x4) M5x14mm Screw (M-B)
(x4) M6x14mm Screw (M-C)
(x4) M8x20mm Screw (M-D)
(x4) M5 Washer (M-E)
(x4) M8 Washer (M-F)
(x8) Spacer (M-G)
(x1) 4mm Allen Wrench (T-A)
(x1) 5mm Allen Wrench (T-B)
(x1) Wrench (T-C)

Tools Needed: Phillips Screwdriver
Weight Capacity: Do not exceed 44lbs (20kg) for the TV and 11lbs (5kg) for the shelf.

Assembly Steps:

Step 1:
Attach Base (A) to Feet (B) using M6x65mm Carriage Bolts (S-C), M6 Washers (S-D), and M6 Lock Nuts (S-E). Tighten using provided Wrench (T-C).

Step 2:
Remove the two bolts, four washers, and two nuts from the Center Pole (C) using Allen Wrench (T-A) and Wrench (T-C). Separate into two halves.

Step 3:
Slide Plastic Cover (G) over the lower portion of Center Pole (C). Slide the top half of the pole back into the lower half andsecure using the hardware you removed in Step 2, Allen Wrench(T-A), and Wrench (T-C).

Step 4:
Attach the Center Pole (C) to Base (A) using Carriage Bolt (S-C), M6 Washer (S-D), and M6 Lock Nut (S-E) through the front of the base. Use M6x12mm Screws (S-G) to secure the top. Tighten using Allen Wrench (T-A) and Wrench (T-C).

Step 5:
Option A: VESA Plate Only – Use Screws (M-A or M-B) along with Washers (M-E) to attach the VESA Plate (D) without the adapters to the TV monitor.

Option B: VESA Plate with Adapters – For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA Adapters (E, F) are required. Attach Adapters to VESA Plate (D) using M5x10mm Screws (S-A) and M5 Lock Nuts (S-B). Tighten using a Wrench (T-C) and a Phillips screwdriver.

Use Screws (M-A thru M-D) along with Washers (M-E, M-F) to secure VESA plate with the adapters to the back of your television. Make sure the VIVO logo is right side up. For a curved television, Spacers (M-G) may be required.

Step 6:
To attach the TV to the stand, loosen the nut at the top of the VESA assembly, then slide the TV with VESA assembly into the slot on top of the mounting plate on Center Pole (C). Place M6 Flange Nut (S-F) onto the bottom thread of the VESA assembly and tighten both nuts using Wrench (T-C).

Once you have completed these steps, your TV stand with storage shelf is ready to use.

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.https://vivo-us.com/products /stand-tv07-s
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com
www.vivo-us.com Chat live with an agent!
309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use

TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

PACKAGE CONTENTS

NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED

WARNING : CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP1
Attach Base (A) to Feet (B) using M6x65mm Carriage Bolts (S-C), M6 Washers (S-D), and M6 Lock Nuts (S-E). Tighten using provided Wrench (T-c).
STEP 2
- Remove the two bolts, four washers, and two nuts from the Center Pole (C) using Allen Wrench (T-A) and Wrench (T-C).
- Separate into two halves.
STEP 3
- Slide the Plastic Cover (G) over the lower portion of the Center Pole (C).
- Slide the top half of the pole back into the lower half and secure using the hardware you removed in step 2, Allen Wrench (T-A), and Wrench (T-C).
STEP 4
Attach Center Pole (C) to Base (A) using Carriage Bolt (S-C), M6 Washer (S-D), and M6 Lock Nut (S-E) through the front of the base. Use M6x12mm Screws (S-G) to secure the top. Tighten using Allen Wrench (T-A) and Wrench (T-C).
STEP 5
- OPTION A: VESA Plate Only
  Use Screws (M-A or M-B) along with Washers (M-E) to attach the VESA Plate (D) without the adapters to the TV monitor.
- OPTION B: VESA Plate with Adapters
  For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA Adapters (E,F) are required. Attach Adapters to VESA Plate (D) using M5x10mm Screws (S-A) and M5 Lock Nuts (S-B). Tighten using Wrench (T-C) and a Phillips screwdriver. Use Screws (M-A thru M-D) along with Washers (M-E, M-F) to secure VESA plate with the adapters to the back of your television. Make sure the “VIVO” logo is right side up. For a curved television, Spacers (M-G) may be required.
STEP 6
To attach the TV to the stand, loosen the nut at the top of the VESA assembly, then slide the TV with VESA assembly into the slot on top of the mounting plate on Center Pole (C). Place M6 Flange Nut (S-F) onto bottom thread of VESA assembly and tighten both nuts using Wrench (T-C).
STEP 7
Remove clear protective film from both the Shelf Clamp Plate (H) and Mounting Bracket (I). Partially insert M6x60mm Socket Head Bolts (S-H) into the shelf using the 5mm Allen Wrench (T-B) as shown.
NOTE : Do not fully tighten screws at this time.
STEP 8
- Hold the Shelf (H) to the Pole (C). Place the Mounting Bracket (I) over the screw heads, then tighten with the 5mm Allen Wrench (T-B).
- Adjust as desired.

INSTAGRAM
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 04/03/2023 REV1.1

Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S

www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M

help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M