VIVO MOUNT-TS32B Telescoping Dual Monitor Wall Mount Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO MOUNT-TS32B Telescoping Dual Monitor Wall Mount
Telescoping Dual Monitor Wall Mount
The Telescoping Dual Monitor Wall Mount is a versatile and adjustable wall mount designed to securely hold two monitors. It allows for easy positioning and adjustment of the monitors to achieve optimal viewing angles and comfort. The mount is compatible with VESA standard mounting patterns and can support monitors weighing up to 22lbs (10kg) per arm.
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING : CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED
Package Contents
- (x1) Wall Mount (A)
- (x1) Arm (B)
- (x2) VESA Plates (C)
- (x2) Cable Clips (D)
- (x2) M-A (8 screws)
- (x8) M-B (8 screws)
- (x8) M-C (8 screws)
- M6 Cap Nuts (x2)
- M4x12mm Thumbscrews (x8)
- M4x30mm Screws (x8) – for curved monitors with M4 Spacers (M-C)
- ST6x60mm Screws (x3)
- 3mm Allen Wrench (T-A)
- 5mm Allen Wrench (T-B)
- 6mm Allen Wrench (T-C)
Tools Needed
- Drill
- Phillips screwdriver
- Stud Finder
- Level
- Pencil
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
ASSEMBLY STEPS
- STEP 1: Stud mounting is required. Use of a stud finder and level is recommended. Place Wall Mount (A) in the desired location, and use a pencil to mark drilling locations.
- STEP 2: Using a 4.5mm (11/64”) drill bit, drill approximately 55mm (2.2”) into marked locations. Secure Wall Mount (A) to wall using ST6x60mm Screws (W-A) and a Phillips screwdriver.
- STEP 3: Slide Arm (B) onto Wall Mount (A) and secure using 6mm Allen Wrench (T-C).
- STEP 4: Assemble VESA Plates (C) to the back of the monitors using M4x12mm Thumbscrews (M-A). For curved monitors, use M4x30mm Screws (M-B) with M4 Spacers (M-C).
- STEP 5: Slide VESA Plates (C) with monitors onto the Swivel Arm (B) and secure using M6 Cap Nuts (S-A).
- STEP 6: Secure Cable Clips (D) to Arm (A) and manage cables.
- STEP 7: Adjust the tilt using 5mm Allen Wrench (T-B). The monitors can be leveled using 3mm Allen Wrench (T-A). Adjust the length of Arm (B) using 3mm Allen Wrench (T-A).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 04/24/2023 REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303:
AVG. RESOLUTION TIME (within office hrs): 5M 4S
Chat live with an agent: www.vivo-us.com
AVG. RESOLUTION TIME (within office hrs): < 15 M
[email protected]
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- Telescoping Dual Monitor Wall Mount – VIVO - desk solutions, screen mounting, and more