Maxxima MCL-6122105B 12 Inch Black LED Flush Mount Ceiling Light Installation Guide
- June 13, 2024
- Maxxima
Table of Contents
Maxxima MCL-6122105B 12 Inch Black LED Flush Mount Ceiling Light
Installation Guide
WARNINGS
- Risk of electric shock or fire – Disconnect power at the source before installation.
- If you are unsure about the installation or the maintenance of the fixture, please consult an electrician.
- Do not make or alter any holes in the wiring enclosure or modify any electrical componentry.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
CAUTIONS
- The fixture must be wired in accordance with the National Electric Code (N.E.C) standards and any applicable local codes or ordinances.
- This fixture is designed for use with 120Vac, 50/60Hz only.
- Suitable for damp locations.
- Supply conductors connecting to the fixture must be rated a minimum of 90° C.
INSTALLATION INSTRUCTIONS
-
Ensure the power has been turned off by switching the circuit breaker to the off position or by removing the fuse from the fuse panel.
-
If replacing an existing fixture remove and disconnect the existing fixture.
-
Remove the mounting bracket from the light by twisting it counter clockwise, shown in figure 1.”
-
Select the desired color temperature by moving the selector switch shown in figure 2.
-
Attach the mounting bracket to the junction box using the supplied mounting screws as shown in figure 3. Ensure the supply wires go through the center hole of the bracket.
-
Connect the hot (black) wire to the black wire, the neutral (white) wire to the white wire and the ground (green/bare copper) wire to the green/yellow wire using the provided wire nuts shown in figure 4.
-
Ensure the wires are safely tucked into the junction box and no wires are being pinched or misplaced.
-
Align the grooves in the body of the light with the mounting bracket and turn the light clockwise to secure. Ensure the light has locked into position. This can be seen in figures 5 and 6.
-
Installation is now complete, restore power and the light is now operational.
3 YEAR WARRANTY
Maxxima extends a 3 year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.
866-MAXXIMA (629-9462)
125 Cabot Court Hauppauge, NY 11788
