Osprey Raptor Pro Downhill Back Protection Mountainbike Owner’s Manual

Raptor Pro Downhill Back Protection Mountain bike
Owner’s Manual
RAPTOR PRO 18
OWNER’S MANUAL

Osprey Raptor Pro Downhill Back Protection Mountain bike

OUR HOLISTIC APPROACH to sustainability uses high quality materials to lower our impact on the environment, promote a safe chemical process and care for the people in our supply chain.
+ View additional details about the sustainable fabrics included in this product on page 2 and on individual product hangtags at the point of sale.
Welcome to Osprey. We pride ourselves on creating the most functional, durable and innovative carrying products for your adventures. Please refer to this owner’s manual for information on product features, use, maintenance, customer service and warranty.

OVERVIEW

FEATURES

1. D3O® BP4 Full Back CE Level 1 Protector: Helps absorb impact in the event of a fall
2. Secure side panel pockets with dual compression for leg/arm protection storage
3. Fully padded front shield with upper compression for full face helmets carry
4. Scratch-free heat-embossed zippered slash pocket for sunglasses and electronics
5. Stretch mesh zippered hipball pockets provide on-trail access for small items
6. Hydration sleeve with direct-zip access and hose path for easy loading
7. Lid Lock bike helmet attachment
8.  Blinky light attachment and reflective patch for safety
9. Removable roll-up tool pouch keeps tools handy and organized
10. Lightweight sternum strap magnet for easy access to water
    + Bike tool organization in main compartment
    + Hydraulics™ LT 2.5-liter reservoir included

FABRIC
MAIN 210D nylon, DWR treatment made without PFAS
BOTTOM 210D nylon, DWR treatment made without PFAS
PRODUCT PROMISE
Built for rowdy riders, the Raptor Pro integrates the D3O®  CE Level 1 back protector to help absorb impact. Whether you’re self-shuttling, accessing machine groomed and feature-built bike playgrounds via lifts or logging long hours in the backcountry, the Raptor Pro has the capacity, ventilation, fit and stability to take lap after lap of punishment.

SPECS

RAPTOR PRO
UNISEX

INCLUDED
Reservoir LT 2.5 L
Tool Roll

• Pack weight does not include reservoir

SUSPENSION/CARRY

D3O ® BP4 L1 BACK PROTECTOR

• Exceeds CE Level 1 certification
• D3O ® uses patented, patent-pending and proprietary technologies to make rate-sensitive, soft, flexible materials with high shock absorbing properties
•  Lightweight and exceptionally soft and flexible design, providing riding comfort without sacrificing durability and protection
• Highly ventilated geometry for maximum breathability
• Easily removable for inspection and cleaning

AIRSCAPE™ BACKPANEL

•  Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body

HARNESS

• Curved bike-specific winged shoulder strap shape provides comfort and stability
• Soft breathable spacer mesh contact surfaces and dicot foam ventilation

HIPBELT

• Aires wrap hipball with zippered pockets provide stability and breathability
• Wide 38 mm webbing with secure aluminum buckle closure

SIZING / FIT

HOW TO MEASURE YOUR TORSO FOR YOUR PACK

RAPTOR PRO
TORSO O/S 17-19″ / 43-48 cm

PACK FIT INSTRUCTIONS

SIZING/FIT DISCLAIMER: Pack depicted in images may not be the pack represented in this owner’s manual.

1. POSITION THE PACK
   Completely loosen the pack’s hipball, harness and load-lifter straps (if applicable). Load the pack with 10-20 lb/4-9 kg of gear. Put the pack on and make sure the hipball is centered and rests over the hipbone. The hipball padding should sit halfway above/below the hipbone.

2. BUCKLE HIPBELT
   Buckle and tighten the hipball evenly using Osprey’s cross-body Ergo Pull. The padding of the hipball should wrap around the hips with approximately 1-3 in/2.5-6 cm of webbing between the buckle and the hipbelt when tightened.

3. HIPBELT ADJUSTMENT
   If the hipball is too large and “tops out” or does not offer the preferred amount of coverage, the customer may need a different pack size, model or adjustment.

4. TIGHTEN SHOULDER STRAP
   Tighten the shoulder harness straps by pulling them down and back.

5. TIGHTEN LOAD LIFTERS (IF APPLICABLE)
   Tightening the load lifters will pull the pack close to the body and help stabilize the load. If the torso length on the pack is adjusted correctly, the load lifters will sit between a 30- to 60-degree angle and align naturally with the shoulder straps.

6. CHECK TORSO LENGTH
   Locate the harness yoke – this is where the harness straps come together near the base of the user’s neck. Locate the C7 vertebra – the large protruding bone at the base of the neck. The yoke should be 1 in/2.5 cm – 2 in/5 cm below the C7 vertebra.

7. CHECK HARNESS FIT
   The harness straps should wrap fully around the shoulders with no gaps between the pack and back. The padded part of the shoulder straps should end at 2 in/5 cm or more below the armpits without topping out.

8. HARNESS/SHOULDER STRAP ADJUSTMENT
   If the harness is too small or large, but the torso length of the pack is correct, the customer may need a different pack size, model or adjustment,

9. BUCKLE THE STERNUM STRAP
   The sternum strap should be adjusted to approximately 2 in/5 cm below the collarbone.

FEATURE DETAILS

BACK PROTECTION
D3O® BP4 Full Back CE Level 1 Protector helps absorb impact in the event of a fall.

DUAL SIDE PANEL POCKETS
With compression for leg/arm protection storage.

RESERVOIR SLEEVE
The dedicated reservoir sleeve is compatible with reservoirs up to 3L.

• An internal hanging loop with buckle ensures proper vertical orientation and stability
• The backplane hydration exit port is centered, allowing routing to the right or left side of the harness
• Elasticized routing straps on the pack’s harness hold the reservoir hose in place

For more information on Osprey’s full line of reservoirs and reservoir care, visit osprey.com.

RESERVOIR BITE VALVE MAGNET
The sternum strap magnet allows for quick access to the reservoir bite valve.

FULL FACE HELMET CARRY
To attach a full face helmet:

1. Unclip the two upper compression straps.
2. Place the helmet face opening up on the front panel of the pack and thread the two compression straps through the helmet’s face opening.
3. Re-clip the compression strap buckles and tension them to hold the helmet securely to the pack.
4. Clip the helmet’s chinstrap through the blinker light attachment near the base of the front panel for extra carrying stability

LIDLOCK HELMET ATTACHMENT
Osprey’s Lid Lock easily and securely carries a bicycle helmet.

1. Locate the Lid Lock helmet attachment clip near the top of the pack’s front panel and pull away from the pack.
2. In the vertical position, pass Lid Lock through helmet vent from the bottom and engage in horizontal position.
3. Inside the pack’s front slash pocket is a cord loop to increase or decrease the Lid Lock’s tension.

BIKE TOOL ROLL
A removable roll-out tool pouch is integrated into its own zippered lower pocket for quick access. It provides tool organization for bike essentials.

FEATURE DETAILS

INTERNAL ORGANIZATION
Organization for essentials and pocketing sized for bike-specific tools and gear.

BLINKER LIGHT ATTACHMENT
Blinker light attachment and reflective patch for safety.

SCRATCH-FREE SLASH POCKET
Scratch-free, heat-embossed zippered slash pocket for sunglasses or electronics.

ZIPPERED MESH HIPBELT POCKETS
On-trail access for small items.

RAPTOR PRO SERIES

Documents / Resources

| Osprey Raptor Pro Downhill Back Protection Mountainbike [pdf] Owner's Manual
Raptor Pro Downhill Back Protection Mountainbike, Raptor Pro, Downhill Back Protection Mountainbike, Back Protection Mountainbike, Protection Mountainbike, Mountainbike
---|---

References

• Osprey Home page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>