OSPREY ACE 75 Integrated Rain Cover Kids Backpack Owner’s Manual

June 6, 2024
OSPREY

**OSPREY ACE 75 Integrated Rain Cover Kids Backpack Owner’s Manual

**

Welcome to Osprey. We pride ourselves on creating the most functional, durable and innovative carrying products for your adventures. Please refer to this owner’s manual for information on product features, use, maintenance, customer service and warranty.

OVERVIEW

Product Overview

SHARED

  1. Top load access to main compartment (with underlid pocket*)
  2. Dual upper side compression straps*
  3. Dual lower side compression straps
  4. Dual access fabric/mesh side pockets
  5. Large front panel fabric/mesh shove-it pocket
  6. Daisy chain for additional gear
  7. Lower zippered sleeping bag access
  8. Sleeping pad straps (removable*)
  9. Hipbelt pockets for easy access to small items on the trail (zippered*)
  10. Integrated removable raincover
  11. Internal reservoir sleeve
  12. Adjustable ice tool or fishing rod loop*

Ace 75/50L only

MAIN FABRIC 600D recycled nylon packcloth
ACCENT 400D recycled nylon packcloth
BOTTOM 500D nylon packcloth

ACE 75

SPECS O/S
Cubic Inches 4577
Liters 75
Pounds 4.12
Kilograms 1.87
Inches 30.71h x 14.57w x 12.99d
Centimeters 78h x 37w x 33d

LOAD RANGE
20-35 lbs. / 9-16 kg.

UNIQUE FEATURES:
Full-length vertical side zipper access to main compartment

ACE 50

Product Overview

SPECS O/S
Cubic Inches 3051
Liters 50
Pounds 3.7
Kilograms 1.68
Inches 27.56h x 13.39w x 11.81d
Centimeters 70h x 34w x 30d

LOAD RANGE
15-25 lbs. / 7-12 kg.

ACE 38

Product Overview

SPECS O/S
Cubic Inches 2319
Liters 38
Pounds 2.91
Kilograms 1.32
Inches 25.2h x 12.6w x 10.63d
Centimeters 64h x 32w x 27d

LOAD RANGE
15-25 lbs. / 7-12 kg.

CARRY

CARRY INSTRUCTIONS

AIRSCAPE BACKPANEL

  • 3.5 mm LightWire peripheral frame effectively transfers the load from harness to hipbelt
  • 3D-tensioned breathable mesh backpanel with side ventilation

HARNESS

  • Soft, edgeless padded mesh harness slides over the AirSpeed™ suspension offering over 4-5 inches of adjustability to ensure excellent fit
  • Adjustable sternum strap with rescue whistle

HIPBELT

  • Soft, edgeless padded mesh offers a soft, breathable contact surface and large load support
  • Fit-on-the-Fly® adjustable hipbelt ensures a perfect fit and comfortable carry as child grows

Ace 75/50L only

SIZING/FIT

HOW TO MEASURE YOUR BACK FOR YOUR PACK

Instructions

POSITION THE PACK

Assembly Instructions

  • Completely loosen the pack’s hipbelt, harness and load-lifter straps.
  • Load the pack with 10-20 lbs/4-9 kg of gear.
  • Put on the pack and make sure that the hipbelt is centered and rests over the hipbone. The hipbelt padding should sit halfway above and below the hipbone.

BUCKLE HIPBELT

Assembly Instructions

  • Buckle and evenly tighten the hipbelt using Osprey’s cross body ErgoPull.
  • The padding of the hipbelt should wrap around the hips with approximately 1-3″ / 2.5-6 cm of webbing between the buckle and the hipbelt when tightened.

TIGHTEN HARNESS

Assembly Instructions

  • Tighten the shoulder harness straps to tension by pulling them down and back.

TIGHTEN LOAD LIFTERS

Assembly Instructions

  • Tighten the load lifters to tension by pulling them up and forward. This will pull the pack close to body to help stabilize the load.

ADJUST HARNESS

Assembly Instructions

  • The harness straps should wrap fully around the shoulders with no gaps between the pack and back.
  • The padded part of the harness straps should end 1-2″ / 2.5-5 cm below the armpit. And the harness should have 1-2″ / 2.5-5 cm of webbing remaining.

TORSO LENGTH

  • Locate the harness yoke – this is where the harness straps come together near the base of the user’s neck. Locate the C7 vertebra – the large protruding bone at the base of the neck. The yoke should be 1-2” / 2.5-5 cm below the C7 vertebra.
  • If the torso length is too short or tall, adjust the torso length of the pack.

ADJUSTABLE HARNESS (TORSO LENGTH)

  1. Identify the harness plugs located in one of the four sizing loops on the backpanel.
  2. Grab the plug’s pull loop with thumb and forefinger and pull the harness’s LightWire extension out and to the sides of the pack. This releases the harness and allows it to slide up and down.
  3. Slide the harness up or down along the LightWire rails to the appropriate torso length.
  4. There are two load-lifter ladder lock options. Correspond the lower two or upper two backpanel settings to the lower or upper load-lifter ladder lock.

STERNUM STRAP

Assembly Instructions

  • Adjust the sternum strap to approximately 2″/5 cm below the collarbone; buckle and tighten to tension.

FEATURES

FEATURES INSTRUCTIONS

RESERVOIR SLEEVE

The dedicated internal hydration sleeve keeps the reservoir close to back, which
provides proper weight distribution when carrying the pack.

  • The loop with buckle ensures proper vertical orientation and stability
  • Elasticized routing straps on right or left side of the pack’s harness hold the reservoir hose in place
  • The backpanel hydration exit port is centered allowing routing to the right or left side of the harness
  • Compatible with any reservoir up to 3L
    RESERVOIR SLEEVE

RAINCOVER

  1. Locate raincover icon near the base of pack.
  2. Remove raincover from compartment and slip it over the top and bottom of the pack.
  3. Tighten the cord lock at the bottom of raincover to tension raincover into place.
  4. To detach raincover, unfasten toggle from cord loop.

Tip: To prevent mildew, allow raincover to dry entirely before storing.

FISHING ROD ATTACHMENT

Assembly Instructions

The single gear loop located at the base of the front panel of the pack is provided for fishing rod or ice tool carry and works in conjunction with your own rigging to provide stable, secure carry.

DUAL UPPER AND LOWER SIDE COMPRESSION STRAPS

Assembly Instructions

Upper and lower compression straps provide added stability when the pack is not full or offer additional attachment points for carrying gear on the outside of the pack.

SLEEPING BAG COMPARTMENT

Assembly Instructions

Lower zippered compartment for dedicated sleeping bag storage with detachable divider for unimpeded access to pack interior.

SLEEPING PAD STRAPS

Assembly Instructions

Removable sleeping pad straps allow for quick, secure external gear attachment.

ZIPPERED HIPBELT POCKETS

Assembly Instructions

FABRIC REINFORCED FRONT SHOVE-IT POCKET

Assembly Instructions

TOP LOAD ACCESS TO MAIN COMPARTMENT WITH UNDERLID POCKET

Assembly Instructions

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals