VIVO STAND-MIC03L Low Height Microphone Desk Mount Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO STAND-MIC03L Low Height Microphone Desk Mount
Product Information
- Product Name: Black Low Height Microphone Desk Mount
- SKU: STAND-MIC03L
- Weight Capacity: 4.4lbs (2kg)
- Manufacturer: VIVO
Contact Information:
- Email: help@vivo-us.com
- Website: https://vivo-us.com/products/stand-mic03l
- Phone: 309-278-5303
- Support Hours: Monday-Friday from 7:00am-7:00pm CST
Warning
WARNING: CHOKING HAZARD – SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
Package Contents
- (x1) Upper Arm (A)
- (x1) Grommet Plate (E)
- (x1) Lower Arm (B)
- (x1) Soft Pad (F)
- (x1) Clamp (C)
- (x1) Arm Base (D)
- (x3) M5x12mm Screw (S-A)
- (x1) 3mm Allen Wrench (T-A)
Tools Needed
- Phillips Screwdriver
Assembly Steps
Step 1 – Option A – Clamp Installation
- Loosen the knob on Clamp (C).
- Mount Clamp (C) to Arm Base (D) using M5x12mm Screws (S-A) and 3mm Allen Wrench (T-A).
- Apply Soft Pad (F) to the inside of Clamp (C).
- Secure the assembly to the desktop by tightening the knob on Clamp (C).
Step 1 – Option B – Grommet Mount
- Unscrew Clamp Screw (C1) on Clamp (C).
- Disassemble Clamp (C) using a Phillips screwdriver and remove Clamp Screw (C1) and Clamp Plate (C2).
- Slide Clamp Plate (C2) to the bottom of the Clamp Screw (C1) and set aside.
- Mount Grommet Plate (E) to Arm Base (D) using M5x12mm Screws (S-A) and 3mm Allen Wrench (T-A), making sure the tapered holes are facing away from the Arm Base.
- Remove adhesive backing from Soft Pad (F) and adhere it to Grommet Plate (E).
- If you do not have an existing grommet hole, use a 3/8 (10mm) drill bit to drill through the desktop surface to create a grommet opening.
- Secure the assembly to the desk using Clamp Screw (C1) and Clamp Plate (C2).
Step 2
- Loosen the set screw on the Arm Base (D) using 3mm Allen Wrench (T-A).
- Install Lower Mic Arm (B).
- Tighten the set screw using 3mm Allen Wrench (T-A).
Step 3
- Loosen the set screw on the Lower Mic Arm (B) using 3mm Allen Wrench (T-A).
- Install Upper Mic Arm (A).
- Tighten the set screw using 3mm Allen Wrench (T-A).
Step 4
Detach cable management trays from mic arms by sliding them towards the front
of the mic stand. Run the mic cable under the mic arms and reattach the cable
management trays.
Usage Instructions
- To adjust the mic angle, loosen the knob and set it as desired. Re-tighten the knob when set.
- To adjust the height of the arm, loosen the joint screw on Upper Arm (A) using 3mm Allen Wrench (T-A). Adjust the arm to the desired height and tighten the joint screw.
If you have any further questions or issues with the product, please contact our support team.
Last Updated: 05/04/2023 REV1
Open Monday-Friday 7:00am-7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Contact: 309-278-5303
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
SKU: STAND-MIC03L
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/stand-mic03l
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- help@vivo-us.com
- www.vivo-us.com Chat live with an agent!
- 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1 – Option A – Clamp Installation
Loosen knob on Clamp (C). Mount Clamp (C) to Arm Base (D) using M5x12mm Screws
(S-A) and 3mm Allen Wrench (T-A).
Apply Soft Pad (F) to inside of Clamp (C).
Secure assembly to desktop by tightening knob on Clamp (C).
STEP 1 – Option B – Grommet Mount
Unscrew Clamp Screw (C1) on Clamp (C). Disassemble Clamp (C) using a Phillips
screwdriver and remove Clamp Screw (C1) and Clamp Plate (C2). Set remaining
components aside. Slide Clamp Plate (C2) to the bottom of the Clamp Screw (C1)
and set aside for use in next step.
Mount Grommet Plate (E) to Arm Base (D) using M5x12mm Screws (S-A) and 3mm Allen Wrench (T-A), making sure the tapered holes are facing away from the Arm Base. Remove adhesive backing from Soft Pad (F) and adhere to Grommet Plate (E).
If you do not have an existing grommet hole, use a 3/8” (10mm) drill bit to drill through desktop surface to create a gromment openning.
Secure assembly to desk using Clamp Screw (C1) and Clamp Plate (C2).
STEP 2
Loosen the set screw on the Arm Base (D), using 3mm Allen Wrench (T-A) then
install Lower Mic Arm (B). Tighten set screw using 3mm Allen Wrench (T-A).
STEP 3
Loosen the set screw on the Lower Mic Arm (B) using 3mm Allen Wrench (T-A),
then install Upper Mic Arm (A). Tighten set screw using using 3mm Allen Wrench
(T-A).
Step 4
Detach cable management trays from mic arms by sliding them towards the front
of the mic stand. Run mic cable under the mic arms and reattach cable
management trays.
Adjust as Desired
To adjust mic angle, loosen the knob and set as desired. Re-tighten knob when
set.
Loosen Joint Screw on Upper Arm (A) using 3mm Allen Wrench (T-A) to adjust arm to desired height.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 05/04/2023 REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Low Height Microphone Desk Mount – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>