Connects2 CAM-TY1-AD Toyota Camera Add On Interface Instruction Manual
- June 13, 2024
- Connects2
Table of Contents
Connects2 CAM-TY1-AD Toyota Camera Add-On Interface
Product Information
The CAM-TY1-AD is a Toyota Camera add-on interface, designed to allow the addition of an aftermarket reverse camera to the OEM screen in a range of Toyota vehicles with Touch & Touch 2 head units. This product is manufactured by Connects2.
Product Contents
- Interface
- Instruction Manual
Application
This product is compatible with the following Toyota vehicles: 4 Runner,
Auris Avensis, Camry, Corolla, Highlander, Hilux, Landcruiser, RAV4, Sequoia,
Tacoma, and Yaris.
Product Usage Instructions
Prior to Installation:
Before installing the CAM-TY1-AD, it is essential to read the instruction
manual thoroughly. Technical knowledge is required for the installation
process. Ensure that the installation location isfree from moisture and away
from heat sources. It is important to use the correct tools to prevent damage
to the vehicle or the product. Connects2 cannot be held responsible for any
issues arising from improper installation.
Technical Support
If you encounter any technical issues during installation or usage,
Connects2 provides fast and suitable resolutions. When seeking technical
support, provide as much information as possible to expedite the process and
assist the support team in resolving your issue. For dedicated online
technical support, visit support.connects2.com. Additionally, you can find
installation guides and tips on Connects2’s YouTube Channel at
www.youtube.com/connects2.
Fitting Guide
The CAM-TY1-AD requires connection to specific car connectors using the
following color codes:
- RED – 12V Input
- WHITE – 12V Output
- PURPLE – Reverse Input
The reverse input position is located at pin 2 of the 28-way white connector
on the back of the OEM head unit.
For more detailed installation instructions, please refer to the Connects2
website at www.connects2.com.
INSTRUCTION
ABOUT THIS PRODUCT…
CAM-TY1-AD
This product allows the addition of an aftermarket reverse camera to the OEM
screen in a range of Toyota vehicles with Touch & Touch 2 head units.
Product Contents
- Interface
- Instruction
Application
TOYOTA 4 Runner, Auris Avensis, Camry, Corolla, Highlander, Hilux, Landcruiser, RAV4, Sequoia, Tacoma, Yaris
Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for
installation. The place of installation must be free of moisture and away from
heat sources. Please ensure you use the correct tools to avoid damage to the
vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 wants to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much information as possible. This will speed up the process and help us to help you. Please use our dedicated online technical support center: support.connects2.com Subscribe to our YouTube Channel for installation guides and tips… www.youtube.com/connects2
FITTING GUIDE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>