Candle Warmer Lamp Electric Candle Lamp Warmer with Timer User Guide
- June 2, 2024
- Candle Warmer Lamp
Table of Contents
Candle Warmer Lamp Electric Candle Lamp Warmer with Timer
Specifications
- Protection Grade: IP20
- Power: 2pcs 50W halogen bulbs
- Power Supply: 110V/50Hz-220V/50Hz
Product Information
The wax melting lamp works by heating the Jar Candle to melt the surface of the fragrance candle evenly, releasing aroma. It provides a safer and more convenient alternative to open flames and also serves as a decorative piece.
Product Usage Instructions
-
Step 1: Install the Bulb
Follow the instructions provided in the manual to correctly install the bulb in the lamp. -
Step 2: Place the Candle
Put the bottled candle in the groove of the base of the lamp. -
Step 3: Power On
Turn on the power switch to activate the Candle Warmer lamp.
Using the Lamp Features
The lamp features dimmers and a timing switch for customized use:
- Short Press: 4-gear brightening; Press and hold for stepless dimming.
- Scheduled switchover: 8H, 4H, 2H hours.
- Press and hold for stepless dimming; Short Press for 4-geardimming.
- Press and hold for stepless dimming; Short Press for On/Off.
- Long press time: Delay 60S time lights.
Candle Usage Tips
When using the Candle Warmer lamp, ensure that you follow these guidelines:
- Heating the candle under the lamp will cause essential oils to volatilize.
- Pour off a layer of melted oil on the surface of the candle to facilitate continued volatilization.
- Avoid touching around the bulb when the product is in use or not cooled.
- Avoid lighting candles simultaneously with the lamp and do not exceed 4 hours of continuous use.
FAQ
Q: What should I do if I have questions while using the product?
A: If you have any questions during usage, please contact the seller for
satisfactory service.
User manual
Product introduction
The working principle of wax melting lamp is to heat the Jar Candle to make the surface of fragrance candle melt evenly, release aroma. It is safer and more convenient without open fire, and has the function of decoration
Instructions for use
The figure is only an explanatory diagram, and the specific products shall be subject to the actual products.
- Step 1 : install the bulb.
- Step 2 :put the bottled candle in the groove of the base and turn on the power.
- Step 3 turn on the switch and use the Candle Warmer lamp.
The candle is heated 2~3 times under the Candle Warmer lamp the essential oil will volatilize, so it is necessary to pour off a layer of melted oil on the surface the essential oi can continue to volatilize until the wax oi is melted.
Parameter
- Protection grade: 1P20
- Working environment: – 5 °C ~ + 45 °C normal operation
- Protection level against electric shock: Class II
- Power:2pcs 50W halogen bulbs
- Power supply: 110V/50Hz-220V/50Hz
Special Tips
- Please read this manual carefully before use;
- Do not use on a plane with an oblique angle of more than 6 degrees;
- Keep away from children and pers. Avoid direct sunlight and high humidity;
- Remove the plastic protective bag outside the amp body before use;
- Before use, please check whether the voltage is the same and whether the product is damaged;
- Do nocturn on the power supply before the installation of the product is completed. Cut off the power supply before moving; Please use it under stable voltage. Unstable voltage will shorten the service life of the bulb;
- Please keep away from curtains, paper and other inflammables;
- When using the Candle warmer lamp, do not light candles at the same time to avoid accidents;
- It is recommended that the continuous working time of wax melting lamp should not exceed 4 hours;
- When using the Candle warmer lamp, do not light candles at the same time to avoid accidents;
- It is recommended that the continuous working time of wax melting lamp should not exceed 4 hours;
- When the productis working or not cooled, do not touch around the bulb and lampshade to prevent scalding;
- Before going to bed, you need to turn off the power supply to avoid excessive working temperature for a long time;
- Do not use wet hands to plug and dial the power supply to avoid the risk of electric shock
- This product is only suitable for indoor use.
Suggestions
- Before wiping and cleaning this product be sure to disconnect the power supply;
- Do not use grinding tools and solvents to clean this product;
- Regular cleaning and inspection are recommended to prolong the service life It is forbidden to wash the lamp body directly with water;
- It is forbidden to disassemble the product for modification.
If you have any questions when using, please contact the seller, we will provide satisfactory service!