Enerlites 51300L 0-10V 0-10V LED Dimmer Single Pole 3 Way Instruction Manual
- June 14, 2024
- ENERLITES
Table of Contents
- Enerlites 51300L 0-10V 0-10V LED Dimmer Single Pole 3 Way
- Specifications
- Product Information
- Installation Instructions
- FAQ
- SPECIFICATIONS
- DESCRIPTION/ FEATURES
- MULTI-GANG INSTALLATION
- DIMMER ADJUSTMENTS
- WIRING
- 51300L Residential 3-Way wiring
- WARRANTY INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Enerlites 51300L 0-10V 0-10V LED Dimmer Single Pole 3 Way
Specifications
- Device Rating:
- Single-Gang Rating: 120V AC, 50-60Hz, 6A / 277V AC, 50-60Hz, 3A CFL/LED/Electronic self-ballasted
- Double-Gang Rating: 120V AC, 50-60Hz, 6A / 277V AC, 50-60Hz, 3A CFL/LED/Electronic self-ballasted
- Triple-Gang Rating: 120V AC, 50-60Hz, 6A / 277V AC, 50-60Hz, 3A CFL/LED/Electronic self-ballasted
Product Information
The 51300L is a 0-10V LED dimmer that can be used on a single-pole or 3-way circuit. It is powered by 120-277 VAC and delivers a control signal of 0-10 VDC to the connected LED drivers or Fluorescent ballasts. At 0 Volts, the connected driver or ballast will translate the signal to 0% light output. At 10 Volts, the signal will translate to 100% light output.
Features:
- Brighter
- Low End Trimpot: Adjusts the low end of the dimming level
- Darker
- Main On/Off switch: Controls the main dimming function
- High End Trimpot: Adjusts the high end of the dimming level
Installation Instructions
WARNING: Turn the POWER OFF at the circuit breaker before installing.
Read and understand these instructions before installing. This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician performs this installation. Make sure to turn off the circuit breaker or fuse(s).
CAUTION: To Reduce The Risk of Overheating and Possible Damage to Other Equipment, Do Not Install to Control a Receptacle, a Motor-Operated Appliance, a Fluorescent Light Fixture, or a Transformer Supplied Appliance.
Wiring Instructions
Follow manufacturer’s instructions for wiring light fixture.
Single-Pole Residential Wiring
Power enters at switch:
- Hot wire: Connect to Ground terminal on the dimmer
- Neutral wire: Connect to Neutral terminal on the dimmer
- Load wire: Connect to Purple (+) terminal on the dimmer
- Ground wire: Connect to Ground terminal on the dimmer
Residential 3-Way Wiring
Power enters at switch:
- Hot wire: Connect to Common terminal on the dimmer and one of the Traveler terminals on the switch
- Neutral wire: Connect to Neutral terminal on the dimmer
- Load wire: Connect to Purple (+) terminal on the dimmer
- Traveler wires: Connect to the remaining Traveler terminals on the switch
- Ground wire: Connect to Ground terminal on the dimmer
Commercial 3-Way Wiring
Power enters at switch:
- Hot wire: Connect to Common terminal on the dimmer and one of the Traveler terminals on the switch
- Neutral wire: Connect to Neutral terminal on the dimmer
- Load wire: Connect to Purple (+) terminal on the dimmer
- Traveler wires: Connect to the remaining Traveler terminals on the switch
- Ground wire: Connect to Ground terminal on the dimmer
Commercial Installation
Power enters at switch:
- Hot wire: Connect to Ground terminal on the dimmer
- Neutral wire: Connect to Neutral terminal on the dimmer
- Load wire: Connect to Purple (+) terminal on the dimmer
- Ground wire: Connect to Ground terminal on the dimmer
FAQ
-
Q: Will removing the tabs affect the maximum load capacity?
A: No, removing the tabs will not affect the maximum load capacity. -
Q: What is the purpose of the Low End Trimpot and High End Trimpot?
A: The Low End Trimpot adjusts the low end of the dimming level, while the High End Trimpot adjusts the high end of the dimming level. -
Q: Can this dimmer be used with a motor-operated appliance?
A: No, this dimmer should not be installed to control a motor-operated appliance.
SPECIFICATIONS
- Voltage…………………………………………………………………………………………120-277 VAC 60Hz
- Load rating…………………………………………………………………………..6A~120VAC, 3A~277VAC
- 0-10 V control link……………………………………………………………………………………………..30mA
- Operating Temperature……………………………………………………………………………..32°F-104°F
DESCRIPTION/ FEATURES
The 51300L is a 0-10V dimmer that can be used on a single-pole or 3-way cicuit. It is powered by 120-277 VAC and delivers a control signal of 0-10 VDC to the connected LED drivers or Fluorescent ballasts. At 0 Volts the connected driver or ballast will translate the signal to 0% light output. At 10 Volts the signal will translate to 100% light output. Other feature includes:
- Small decorative On/Off switch for control of the 120-277VAC output
- Fine tuning: adjustable high-end and low-end trim-pot for maximum control over dimming range
- Constant memory returns light to previous level after a power failure
- Simple slide control lever to fade lighting up and down smoothly
WARNING
Turn the POWER OFF at the circuit breaker before installing
Read and understand these instructions before installing. This device is
intended for installation in accordance with the National Electric Code and
local regulations. It is recommended that a qualified electrician performs
this installation. Make sure to turn off the circuit breaker or fuse(s).
Use copper wire only
“CAUTION – To Reduce The Risk of Overheating and Possible Damage to Other
Equipment, Do Not Install to Control a Receptacle, a Motor-Operated Appliance
or a Fluorescent Light Fixture or a Transformer Supplied Appliance”
MULTI-GANG INSTALLATION
Removal of tabs WILL NOT effect maximum load capacity.
DIMMER ADJUSTMENTS
WIRING
51300L Residential 3-Way wiring
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. Original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc. Warranties from other Enerlites products may vary. This warranty is nontransferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
© 2016 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0208170081-06 V6A REV 20230802
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>