KLARSTEIN FIGO Ceiling Fan with Lighting Instruction Manual

: June 2, 2024
: Klarstein

Table of Contents

KLARSTEIN FIGO Ceiling Fan with Lighting
TECHNICAL DATA
SAFETY INSTRUCTIONS
INSTALLATION
COMMISSIONING AND OPERATION
- Remote Control
Specifications
Frequently Asked Questions (FAQ)
Q: Can I use bulbs with wattage higher than 42W?

KLARSTEIN FIGO Ceiling Fan with Lighting

INSTRUCTION MANUAL

Dear Customer,

Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use.

Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number: 10029345, 10029346, 10033505
Power supply: 220-240 V~ 50-60 Hz

SAFETY INSTRUCTIONS

Never attach the fan to a power point,but to the ceiling itself.
The minimum distance between the blades of the fan and the floor must be more than 2.3 m. The minimum carrying capacity of the hook from which the fan is hung must be 100 kg.
Make sure to install all poles disconnection switch having a contact separation of at least 3 mm between poles in the supply wiring to the ceiling fan.
The model or type reference of luminaries which may be installed in fans which are constructed for his purpose.
Switch off the power before connecting.
The electrical wiring must be in accordance with the local regulation.
The fan must be properly earthed to avoid the risk of electric shocks.
Never mount the fan in a moist or wet room.
Be careful when working near the rotating blades.
This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

Note: Always have your fan installed by someone who is knowledgeable about electrical wiring.

INSTALLATION

1| | Fasten the mounting plate to a ceiling joist with two screws, lock washers and washers. The ceiling joist must be strong enough to support the weight of the moving fan.
---|---|---
2| | Attach the fan components to the mounting plate. Align the ball joint of the fan with the suspension lug of the mounting plate.
3| | Insert the remote control receiver between the clamp and the ball joint.
4| | Connect the internal cables by plugging the two plastic connectors together until they snap into place.
5| | Connect the cables of the grounded power source to the terminal block.
6| | Slide the cover over the mounting plate. Make sure that you do not disconnect any cables in the process.
7| | Attach the rotor blades with the spring washers and screws that are already on the motor.
8| | Connect the lamp cables by plugging the two plastic connectors together until they snap into place.
9| | Attach the lamp socket to the mounting brackets and fix it with three fixing screws and star washers. Make sure that you do not disconnect any cables in the process.
10| | Attach the bulbs (max. 42 W E14, not included) to the lamp holder.
11| | Attach the lampshade to the socket by turning it clockwise.
12| |

COMMISSIONING AND OPERATION

Press the Speed button on the remote control to select a speed: HI: High • MED: Medium • LOW: Low • OFF: Off.
The switch on the motor housing can be used to influence the direction of the airflow generated by the rotor blades. Caution: Turn off the fan before changing the direction of the airflow and wait until the fan has stopped so that you do not injure yourself or damage the motor.
Cold Weather: Set the switch to RIGHT to allow the blades to distribute the warm air under the ceiling to the room below.
Warm weather: set the switch to LEFT so the blades create a cooling airflow and distribute it into the room.
Press the ON/OFF light button on the remote control to turn the light on the fan on and off.

Remote Control

Use the remote control to change the wind speed and turn the light or fan on/off. Slide back the battery compartment door and insert two AAA batteries (not included). Make sure that you insert the batteries the right way round. Then close the battery compartment again. Make sure that the battery compartment is always firmly closed. Do not place the remote control in direct sunlight. Do not attempt to recharge dead batteries. Only charge batteries that are expressly intended for this purpose. Do not dispose of batteries in fire to prevent explosions.

Specifications

Item Number: 10029345, 10029346, 10033505
Power Supply: 220-240 V~ 50-60 Hz

Frequently Asked Questions (FAQ)

Q: Can I use bulbs with wattage higher than 42W?

A: It is recommended to use bulbs with a maximum of 42W E14 to prevent overheating and damage to the lamp holder.

Q: What should I do if the remote control is not working?

A: Check the batteries in the remote control and ensure they are properly inserted. If the issue persists, contact customer support for assistance.

Q: How do I access the latest user manual?

A: Scan the QR code provided with the product to access the latest user manual and additional product information.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.